| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| May 2026: This security advisory provides the details and fix information for a vulnerability that was discovered and fixed after the was disclosed in February 2026. This new advisory is for a new vulnerability in the control connection handshaking. The section of this advisory includes Show Control Connections guidance to help with system checks.
A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, and Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system.
This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to the affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. |
| A vulnerability in the web UI of Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, could allow an authenticated, remote attacker with read-only permissions to elevate their privileges from low to high and perform actions as a high-privileged user.
This vulnerability exists because sensitive session information is recorded in audit logs. An attacker could exploit this vulnerability by elevating their read-only permissions in Cisco Catalyst SD-WAN Manager to those of a high-privileged user. A successful exploit could allow the attacker to perform actions as a high-privileged user. |
| A vulnerability in the web UI of Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, could allow an authenticated, remote attacker with read-only permissions to modify configurations and perform unauthorized actions on an affected system.
This vulnerability exists because of a failure to redact sensitive information within device configurations and templates. An attacker could exploit this vulnerability by elevating their read-only permissions to those of a high-privileged user. A successful exploit could allow the attacker to access or modify configuration settings within Cisco Catalyst SD-WAN Manager as a high-privileged user. |
| A vulnerability in the web UI of Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, could allow an unauthenticated, remote attacker to read arbitrary files that are stored in an affected system. The attacker does not need to have valid user credentials.
This vulnerability is due to improper handling of XML External Entity (XXE) entries when parsing an XML file. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to read arbitrary files that are stored in the affected system. |
| A vulnerability in Cisco Catalyst SD-WAN Software could allow an unauthenticated, remote attacker to view sensitive information on an affected system.
This vulnerability is due to insufficient file system restrictions. An authenticated attacker with netadmin privileges could exploit this vulnerability by accessing the vshell of an affected system. A successful exploit could allow the attacker to read sensitive information on the underlying operating system. |
| Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.1) uses default (1) usernames and (2) passwords for (a) the administrator and (b) web management, which makes it easier for remote attackers to perform configuration changes or obtain operating-system access. |
| The Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.x before 5.2 allow remote attackers to cause a denial of service (web authentication outage or device reload) via unspecified network traffic, as demonstrated by a vulnerability scanner. |
| The Cisco Firewall Services Module (FWSM) 2.x, 3.1 before 3.1(16), 3.2 before 3.2(13), and 4.0 before 4.0(6) for Cisco Catalyst 6500 switches and Cisco 7600 routers allows remote attackers to cause a denial of service (traffic-handling outage) via a series of malformed ICMP messages. |
| Unspecified vulnerability in the SNMPv2c implementation in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SNMPv1 packet. |
| Unspecified vulnerability in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SSH packet. |
| Unspecified vulnerability in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.2) and Cisco ACE 4710 Application Control Engine Appliance before A1(8.0) allows remote attackers to cause a denial of service (device reload) via a crafted SNMPv3 packet. |
| The Network Analysis Module (NAM) in Cisco Catalyst Series 6000, 6500, and 7600 allows remote attackers to execute arbitrary commands via certain SNMP packets that are spoofed from the NAM's own IP address. |
| The Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.2.x before 5.2.157.0 allow remote attackers to cause a denial of service (device reload) via a web authentication (aka WebAuth) session that includes a malformed POST request to login.html. |
| Unspecified vulnerability in the Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.2.173.0 allows remote authenticated users to gain privileges via unknown vectors, as demonstrated by escalation from the (1) Lobby Admin and (2) Local Management User privilege levels. |
| Unspecified vulnerability in the Wireless LAN Controller (WLC) TSEC driver in the Cisco 4400 WLC, Cisco Catalyst 6500 and 7600 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.x before 5.1 allows remote attackers to cause a denial of service (device crash or hang) via unknown IP packets. |
| The administrative web interface on the Cisco Wireless LAN Controller (WLC) platform 4.2 before 4.2.205.0 and 5.x before 5.2.178.0, as used in Cisco 1500 Series, 2000 Series, 2100 Series, 4100 Series, 4200 Series, and 4400 Series Wireless Services Modules (WiSM), WLC Modules for Integrated Services Routers, and Catalyst 3750G Integrated Wireless LAN Controllers, allows remote attackers to cause a denial of service (device reload) via a malformed response to a (1) HTTP or (2) HTTPS authentication request, aka Bug ID CSCsx03715. |
| Unspecified vulnerability in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.2) and Cisco ACE 4710 Application Control Engine Appliance before A1(8a) allows remote authenticated users to execute arbitrary operating-system commands through a command line interface (CLI). |
| Unspecified vulnerability on the Cisco Wireless LAN Controller (WLC) platform 4.x before 4.2.205.0 and 5.x before 5.2.191.0, as used in Cisco 1500 Series, 2000 Series, 2100 Series, 4100 Series, 4200 Series, and 4400 Series Wireless Services Modules (WiSM), WLC Modules for Integrated Services Routers, and Catalyst 3750G Integrated Wireless LAN Controllers, allows remote attackers to modify the configuration via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCsy44672. |
| Memory leak on the Cisco Wireless LAN Controller (WLC) platform 4.x before 4.2.205.0, 5.1 before 5.1.163.0, and 5.0 and 5.2 before 5.2.178.0, as used in Cisco 1500 Series, 2000 Series, 2100 Series, 4100 Series, 4200 Series, and 4400 Series Wireless Services Modules (WiSM), WLC Modules for Integrated Services Routers, and Catalyst 3750G Integrated Wireless LAN Controllers, allows remote attackers to cause a denial of service (memory consumption and device reload) via SSH management connections, aka Bug ID CSCsw40789. |
| The TCP implementation in (1) Linux, (2) platforms based on BSD Unix, (3) Microsoft Windows, (4) Cisco products, and probably other operating systems allows remote attackers to cause a denial of service (connection queue exhaustion) via multiple vectors that manipulate information in the TCP state table, as demonstrated by sockstress. |
