| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY
commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a
permission check for FSCTL_SET_SPARSE") added a fp->daccess gate to
fsctl_set_sparse and noted that "similar handle-level checks exist in other
functions but are missing here." The SMB2 SET_INFO SECURITY arm is one of
the missing ones, and the most security-relevant: smb2_set_info_sec() calls
set_info_sec() with no per-handle access check.
set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: it
rewrites owner/group/mode via notify_change(), rewrites the POSIX ACL via
set_posix_acl(), and on KSMBD_SHARE_FLAG_ACL_XATTR shares removes and
rewrites the Windows security descriptor via ksmbd_vfs_set_sd_xattr().
Every other persistent-mutation arm of the sibling handler
smb2_set_info_file() checks fp->daccess first (FILE_WRITE_DATA /
FILE_DELETE / FILE_WRITE_EA / FILE_WRITE_ATTRIBUTES); the SECURITY arm —
which mutates the access control itself — is the only one with no gate.
A client can therefore open a handle with FILE_WRITE_ATTRIBUTES only (no
FILE_WRITE_DAC / FILE_WRITE_OWNER) and use SMB2_SET_INFO with InfoType
SMB2_O_INFO_SECURITY to rewrite the file's DACL and owner, granting itself
access the handle's daccess never carried. Unlike the FSCTL data arms this
is a metadata/xattr operation, so there is no FMODE_WRITE VFS backstop —
the missing fp->daccess check is the entire gate.
Setting a security descriptor is the WRITE_DAC / WRITE_OWNER operation, so
require at least one of those on the handle before re-permissioning the
file. -EACCES is mapped to STATUS_ACCESS_DENIED by smb2_set_info(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection
was pending, but hdev->sent_cmd can be NULL while req_status is still
HCI_REQ_PEND, leading to a NULL pointer dereference and a general
protection fault from the hci_rx_work() receive path.
Instead of inspecting hdev->sent_cmd, track the in-flight create
connection command with a new per-connection HCI_CONN_CREATE flag and
route all cancellation through hci_cancel_connect_sync(), which
dispatches to a dedicated per-type cancel function. The create command
is in exactly one of two states: still queued, or in flight. The cancel
function holds cmd_sync_work_lock across the whole decision: the worker
takes this lock to dequeue every entry, so while it is held a queued
command cannot start running and an in-flight command cannot complete
and let the next command become pending. This keeps the flag test and
hci_cmd_sync_cancel() atomic with respect to the worker, so a queued
command is simply dequeued, and an in-flight command owned by this
connection is cancelled without the risk of cancelling an unrelated
command that became pending in the meantime. CIS uses the same flag
mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection.
hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear
HCI_CONN_CREATE after the create command completes, but the command
status handler can free conn via hci_conn_del() (for example when the
controller rejects the connection) while the worker is still blocked on
the connection complete event. Hold a reference on conn across the
create command so the flag can be cleared without a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix UAF in bt_accept_dequeue()
bt_accept_get() takes a temporary reference before dropping the accept
queue lock. bt_accept_dequeue() currently drops that reference before
bt_accept_unlink(), leaving only the queue reference.
bt_accept_unlink() drops the queue reference. The subsequent
sock_hold() therefore accesses freed memory if it was the final
reference, as observed by KASAN during listening L2CAP socket cleanup.
Retain the temporary queue-walk reference through unlink and hand it to
the caller on success. Drop it explicitly on the closed and
not-yet-connected paths. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ATR_REQ length against the received frame
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req->length larger
than the frame makes gb_len exceed the general bytes actually present,
and the memcpy reads out of bounds past the received skb. Those bytes are
placed in the ATR_RES and sent back to the peer (kernel-memory disclosure
to a proximity attacker); a larger declared length is an out-of-bounds
read (DoS).
Reject frames whose declared length exceeds the received length. The
adjacent nfc_tm_activated() path in the same function already derives its
general-bytes length from skb->len rather than the declared field.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf()
Add a check to see if devm_kasprintf() is not NULL in
mchp_ipc_get_cluster_aggr_irq(), returning -ENOMEM if the function
failed. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: pci-epf: put CQ ref on create_cq mapping failure
nvmet_pci_epf_create_cq() calls nvmet_cq_create(), which takes a
reference on the controller and installs the completion queue. If the
subsequent PCI address-space mapping fails or returns a too-small partial
mapping, the function jumps to err_internal / err_unmap_queue without
calling nvmet_cq_put(). The matching put in nvmet_pci_epf_delete_cq() is
gated on NVMET_PCI_EPF_Q_LIVE, which is only set after the mapping
succeeds, so teardown never releases these references. A remote PCI host
that drives Create IO CQ commands with a failing PRP1/pci_addr therefore
leaks the CQ and a controller reference on each attempt.
Drop the CQ reference on the mapping-failure paths. The err_internal and
err_unmap_queue labels are only reachable after nvmet_cq_create() has
succeeded, so this pairs the create/put correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: terminate table name before find_table_lock()
update_counters() and compat_update_counters() forward a user-supplied
32-byte table name to find_table_lock() without NUL-terminating it. On a
lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s",
"ebtable_", name), and vsnprintf() reads past the name field and the
stack object until it hits a zero byte.
BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730)
Read of size 1 at addr ffff8880119dfb20 by task exploit/147
Call Trace:
...
string (lib/vsprintf.c:648 lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
__request_module (kernel/module/kmod.c:150)
do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380)
update_counters (net/bridge/netfilter/ebtables.c:1440)
do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573)
nf_setsockopt (net/netfilter/nf_sockopt.c:101)
ip_setsockopt (net/ipv4/ip_sockglue.c:1424)
raw_setsockopt (net/ipv4/raw.c:847)
__sys_setsockopt (net/socket.c:2393)
...
compat_do_replace() shares the same unterminated name via
compat_copy_ebt_replace_from_user(); terminate it there too so all
find_table_lock() callers behave alike. The other callers already
terminate the name after the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: module names must be null-terminated
We need to explicitly check the length, else we may pass non-null
terminated string to request_module(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: zero chainstack array
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: handle unreadable frags
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/swap: add cond_resched() in swap_reclaim_full_clusters to prevent softlockup
We hit a real softlockup in an internal stress test environment. The
workload was LTP memory/swap stress on a large arm64 machine, with 320
CPUs, about 1TB memory and an 8.6GB swap device. The system was under
heavy load and the swap device had a large number of full clusters. The
softlockup was triggered during a stress test after about 3 days.
So, add periodic cond_resched() calls during large full_clusters
reclaim operations to prevent softlockup issues.
Detailed call trace as follow:
PID: 3817773 TASK: ffff0883bb28b780 CPU: 48 COMMAND: "kworker/48:7"
#0 [ffff800080183d10] __crash_kexec at ffffa4c1361e5de4
#1 [ffff800080183d90] panic at ffffa4c1360d5e9c
#2 [ffff800080183e20] watchdog_timer_fn at ffffa4c136231fa8
...
#16 [ffff8000c4ad3cb0] swap_cache_del_folio at ffffa4c1363e1614
#17 [ffff8000c4ad3ce0] __try_to_reclaim_swap at ffffa4c1363e4bfc
#18 [ffff8000c4ad3d40] swap_reclaim_full_clusters at ffffa4c1363e5474
#19 [ffff8000c4ad3da0] swap_reclaim_work at ffffa4c1363e550c
#20 [ffff8000c4ad3dc0] process_one_work at ffffa4c136102edc
#21 [ffff8000c4ad3e10] worker_thread at ffffa4c136103398
#22 [ffff8000c4ad3e70] kthread at ffffa4c13610d95c |
| In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix NULL pointer dereference in debugfs
shrinker_debugfs_add() creates both "count" and "scan" debugfs files
unconditionally.
That assumes every shrinker implements both count_objects() and
scan_objects(), which is not guaranteed. For example, the xen-backend
shrinker sets count_objects() but leaves scan_objects() NULL, so writing
to its scan file calls through a NULL function pointer and panics the
kernel:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
Call Trace:
<TASK>
shrinker_debugfs_scan_write+0x12e/0x270
full_proxy_write+0x5f/0x90
vfs_write+0xde/0x420
? filp_flush+0x75/0x90
? filp_close+0x1d/0x30
? do_dup2+0xb8/0x120
ksys_write+0x68/0xf0
? filp_flush+0x75/0x90
do_syscall_64+0xb3/0x5b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The count path has the same issue in principle if a shrinker omits
count_objects().
To fix it, only create "count" and "scan" debugfs files when the
corresponding callbacks are present. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix shrinker_info teardown race with expansion
expand_shrinker_info() iterates all visible memcgs under shrinker_mutex,
including memcgs that have not finished ->css_online() yet.
Once pn->shrinker_info has been published, teardown must stay serialized
with expand_shrinker_info() until that memcg is either fully online or no
longer visible to iteration. Today alloc_shrinker_info() breaks that rule
by dropping shrinker_mutex before freeing a partially initialized
shrinker_info array, which may cause the following race:
CPU0 CPU1
==== ====
css_create
--> list_add_tail_rcu(&css->sibling, &parent_css->children);
online_css
--> mem_cgroup_css_online
--> alloc_shrinker_info
--> alloc node0 info
rcu_assign_pointer(C->node0->shrinker_info, old0)
alloc node1 info -> FAIL -> goto err
mutex_unlock(shrinker_mutex)
shrinker_alloc()
--> shrinker_memcg_alloc
--> mutex_lock(shrinker_mutex)
expand_shrinker_info
--> mem_cgroup_iter see the memcg
expand_one_shrinker_info
--> old0 = C->node0->shrinker_info
memcpy(new->unit, old0->unit, ...);
free_shrinker_info
--> kvfree(old0);
/* double free !! */
kvfree_rcu(old0, rcu);
The same problem exists later in mem_cgroup_css_online(). If
alloc_shrinker_info() succeeds but a subsequent objcg allocation fails,
the free_objcg -> free_shrinker_info() unwind path tears down the already
published pn->shrinker_info arrays without shrinker_mutex. The
expand_one_shrinker_info() can race with that teardown in the same way,
leading to use-after-free or double-free of the old shrinker_info.
Fix this by serializing shrinker_info teardown with shrinker_mutex, and by
keeping alloc_shrinker_info() error cleanup inside the locked section. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
Reading the debugfs "count" file of a memcg-aware shrinker can sleep
inside an RCU read-side critical section:
BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421
RCU nest depth: 1, expected: 0
css_rstat_flush
mem_cgroup_flush_stats
zswap_shrinker_count
shrinker_debugfs_count_show
shrinker_debugfs_count_show() invokes the ->count_objects() callback under
rcu_read_lock(). The zswap callback flushes memcg stats via
css_rstat_flush(), which may sleep, so it must not run under RCU.
The RCU lock is not needed here. mem_cgroup_iter() takes RCU internally
and returns a memcg holding a css reference (dropped on the next iteration
or by mem_cgroup_iter_break()), so the memcg stays alive without it. The
shrinker is kept alive by the open debugfs file: shrinker_free() removes
the debugfs entries via debugfs_remove_recursive(), which waits for
in-flight readers to drain, before call_rcu(..., shrinker_free_rcu_cb).
The sibling "scan" handler already invokes the sleeping ->scan_objects()
callback with no RCU section.
Drop the rcu_read_lock()/rcu_read_unlock(). |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: cros_ec: Delay dev_set_drvdata() until probe success
If ec_device_probe() fails, cros_ec_class_release releases memory for the
cros_ec_dev structure. However, because the drvdata was already set,
sub-drivers like cros_ec_typec can still retrieve the stale pointer via the
platform device. This leads to a use-after-free when cros_ec_typec attempts
to access &typec->ec->ec->dev on a device that has already been released.
Move dev_set_drvdata() to ensure that the pointer is only made available
once all initialization steps have succeeded.
sysfs: cannot create duplicate filename '/class/chromeos/cros_ec'
Call trace:
sysfs_do_create_link_sd+0x94/0xdc
sysfs_create_link+0x30/0x44
device_add_class_symlinks+0x90/0x13c
device_add+0xf0/0x50c
ec_device_probe+0x150/0x4f0
platform_probe+0xa0/0xe0
...
BUG: KASAN: invalid-access in __memcpy+0x44/0x230
Write at addr f5ffff809e2d33ac by task kworker/u32:5/125
Pointer tag: [f5], memory tag: [fe]
Tainted : [W]=WARN, [O]=OOT_MODULE
Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3
Workqueue: events_unbound deferred_probe_work_func
Call trace:
__memcpy+0x44/0x230
cros_ec_check_features+0x60/0xcc [cros_ec_proto]
cros_typec_probe+0xe8/0x6e0 [cros_ec_typec]
platform_probe+0xa0/0xe0 |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: Fix use-after-free on remove
KASAN reports a slab-use-after-free in __media_entity_remove_link()
during rmmod of imx8_isi:
BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650
Read of size 2 at addr ffff0000d47cb02a by task rmmod/724
Call trace:
__media_entity_remove_link+0x608/0x650
__media_entity_remove_links+0x78/0x144
__media_device_unregister_entity+0x150/0x280
media_device_unregister_entity+0x48/0x68
v4l2_device_unregister_subdev+0x158/0x300
v4l2_async_unbind_subdev_one+0x22c/0x358
v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0
v4l2_async_nf_unregister+0x5c/0x14c
mxc_isi_remove+0x124/0x2a0 [imx8_isi]
Allocated by task 249:
__kmalloc_noprof+0x27c/0x690
mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi]
Freed by task 724:
kfree+0x1e4/0x5b0
mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi]
mxc_isi_remove+0x11c/0x2a0 [imx8_isi]
The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup()
before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the media
entity pads, but the subsequent v4l2 cleanup still tries to remove
media links that reference those pads.
Fix this by calling mxc_isi_v4l2_cleanup() before
mxc_isi_crossbar_cleanup() to ensure all media entities are properly
unregistered while the pads are still valid. |
