| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix leaking uninitialized kernel memory
If hash size is less than device's tuple size, dm-integrity is supposed
to zero the remaining space. There was a bug in the code that zeroing
didn't work. This commit fixes it. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: hold socket lock when dumping endpoints in sctp_diag
SCTP_DIAG endpoint dumping was traversing endpoint address lists without
holding lock_sock(), while those lists could change concurrently via
socket operations (e.g., bindx changes). This creates a race where
nla_reserve() counts addresses under RCU protection, but the subsequent
copy may see fewer entries, potentially leaking uninitialized memory to
userspace.
Fix this by:
- Taking a reference on each endpoint during hash traversal
- Moving socket operations (lock_sock()) outside read_lock_bh()
- Serializing address list access during dump
- Reworking sctp_for_each_endpoint() to support restart-based traversal
with (net, pos) tracking
Also:
- Add WARN_ON_ONCE() for inconsistent address counts
- Fix idiag_states filtering for LISTEN vs association cases
- Skip dumping endpoints being freed (ep->base.dead)
- Move dump position tracking into iterator, removing cb->args[4] and
its comment for sctp_ep_dump().,
- Update the comment for cb->args[4] and remove the comment for unused
cb->args[5] for sctp_sock_dump().
Note: traversal is restart-based and may re-scan buckets multiple times,
but this is acceptable due to small bucket sizes and required to support
sleeping-safe callbacks.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size
vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB
binner BO, but writes the size of the whole BO to BPOS. On every binner
out-of-memory event the PTB is therefore authorized to write tile lists
across all the other slots (which may hold the tile state, tile alloc and
overflow memory of in-flight jobs) and, for any slot but the first, past
the end of the binner BO into unrelated CMA memory.
Since CMA pages are recycled into page cache and user allocations, this
is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU
hangs with corrupted control list pointers, userspace heap corruption, a
GPU that stays permanently wedged after the first hang, and occasional
full system crashes, whenever a job overflows the initial binner slot.
The bug dates back to the conversion from a dedicated overflow BO (where
writing the full BO size was correct) to the slotted binner BO. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix potential use-after-free in audit_del_rule()
`audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()`
before unlinking the rule from RCU-visible filter lists and waiting for a
grace period. Concurrent readers in `audit_filter()` and
`audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify
mark can be freed on an independent lifetime path. This creates a
use-after-free window during rule deletion.
Fix this by unlinking the rule from the RCU-visible lists and invoking
`synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other
rule removal helpers). This ensures that all existing RCU readers have
exited the critical section before any underlying resources are destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvneta: re-enable percpu interrupt on resume
On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu
IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls
disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules
NAPI poll, which calls enable_percpu_irq() on completion to unmask.
If suspend occurs while NAPI poll is pending (between
disable_percpu_irq in the ISR and enable_percpu_irq in poll
completion), the interrupt is never re-enabled:
1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule()
=> MPIC masked, percpu_enabled cpumask bit cleared
2. NAPI poll does not complete before suspend proceeds
(on PREEMPT_RT this is highly likely since softirqs run in
ksoftirqd which gets frozen; on non-RT it can happen when
softirq processing is deferred to ksoftirqd)
3. mvneta_stop_dev => napi_disable(): cancels the pending poll
without executing the completion path
4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC
(already masked, but records IRQS_SUSPENDED)
5. Resume: mpic_resume checks irq_percpu_is_enabled() => false
(bit was cleared in step 1) => skips unmask
6. mvneta_start_dev only restores device-level INTR_NEW_MASK,
does not touch the MPIC per-CPU mask
Result: MPIC per-CPU interrupt stays masked permanently. The NIC
generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never
receives them, causing complete loss of network connectivity.
Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path
to unconditionally unmask the MPIC per-CPU interrupt regardless of
pre-suspend state. |
| Uncaught Exception (CWE-248) in the T20 Readers allows an authenticated and authorized operator to trigger a restart by sending specific requests, resulting in a temporary denial of service. Version of Command Centre affected:
* 9.50 prior to vCR9.50.260616a (distributed in 9.50.1587(MR1))
* 9.40 prior to vCR9.40.260616a (distributed in 9.40.3130(MR3))
* 9.30 prior to vCR9.30.260616a (distributed in 9.30.3983(MR5))
* 9.20 prior to vCR9.20.260616a (distributed in 9.20.4349(MR7))
* all versions of 9.10 and prior. |
| Uncaught Exception (CWE-248) in the Controller 6000 and Controller 7000 diagnostic web interface allows an authenticated and authorized operator to trigger a Controller restart by sending specific requests, resulting in a temporary denial of service.
Version of Command Centre affected:
* 9.50 prior to vCR9.50.260616a (distributed in 9.50.1587(MR1))
* 9.40 prior to vCR9.40.260616a (distributed in 9.40.3130(MR3))
* 9.30 prior to vCR9.30.260616a (distributed in 9.30.3983(MR5))
* 9.20 prior to vCR9.20.260616a (distributed in 9.20.4349(MR7))
* all versions of 9.10 and prior. |
| actix-files before 0.6.10 contains a denial of service vulnerability triggered by an empty Range header in GET requests for static files. When panic is set to abort, remote attackers can crash the process on-demand by sending a GET request with an empty Range header. |
| Use of inherently dangerous function PQfn(..., result_is_int=0, ...) in PostgreSQL libpq lo_export(), lo_read(), lo_lseek64(), and lo_tell64() functions allows the server superuser to overwrite a client stack buffer with an arbitrarily-large response. Like gets(), PQfn(..., result_is_int=0, ...) stores arbitrary-length, server-determined data into a buffer of unspecified size. Because both the \lo_export command in psql and pg_dump call lo_read(), the server superuser can overwrite pg_dump or psql stack memory. Versions before PostgreSQL 18.4, 17.10, 16.14, 15.18, and 14.23 are affected. |
| Uncaught Exception (CWE-248), resulting from Improper Input Validation (CWE-20), in Kibana can lead to denial of service via Input Data Manipulation (CAPEC-153). An authenticated user holding only low-privileged access can cause an internal error condition in Kibana by supplying specially crafted data. The resulting error is raised on an execution path so it propagates as an uncaught exception and terminates the Kibana process. Kibana is unavailable to all users until the service is restarted, and the condition can be triggered repeatedly. |
| Uncaught Exception (CWE-248) in Kibana Cases can lead to denial of service via Input Data Manipulation (CAPEC-153). Malformed link syntax stored in a case comment was not rejected or sanitized when the comment was later formatted for display, and the resulting unhandled error prevented the affected case from being displayed. An authenticated user holding privileges to comment on a case could store such a comment, after which that case became inaccessible to every user who opened it until the stored comment was removed. |
| In Zimbra Collaboration (ZCS) before 10.1.17, a path traversal vulnerability exists in the Zimbra Briefcase document editing functionality due to improper validation of the packages parameter. An authenticated attacker can exploit this vulnerability by supplying a crafted path traversal sequence, potentially allowing unauthorized disclosure of sensitive files within the web application directory. |
| The dataplane token validator in kuma-cp performs an unchecked Go type assertion on the JWT kid header. A token whose kid is a JSON number decodes as a float64 and triggers a runtime panic before any signature, claims, or authorization check runs.
The panic terminates the entire kuma-cp process, HTTP API, the health and readiness endpoints, and xDS. Unauthenticated access to the dataplane gRPC server can trigger the crash with a malformed token
A single request is a transient interruption; sustaining an outage requires repeated requests. |
| Browserslist is a configuration tool for sharing target browsers and Node.js versions between front-end tools. Prior to 4.28.7, normalizeStats() in node.js, reached unconditionally through getStat() and loadStat() on every browserslist() call, processes untrusted browserslist-stats.json, opts.stats, and CLI --stats data with an unguarded for...in loop and plain-object bracket access and assignment, allowing inherited Object.prototype keys including __proto__, toString, valueOf, constructor, hasOwnProperty, and isPrototypeOf to cause an uncaught TypeError or modify the prototype of the returned normalized object. This issue is fixed in version 4.28.7. |
| SurrealDB versions before 2.2.2 contain an uncaught exception vulnerability in the net module that allows authenticated users to crash the database. Attackers can send crafted HTTP queries containing null bytes to the /sql endpoint, causing an unhandled exception that crashes the SurrealDB instance and any dependent applications. |
| IBM Aspera Desktop App 1.0.5 through 1.0.19 can allow arbitrary code execution by loading DLL files at start-up. |
| NextAuth.js provides authentication for Next.js. Prior to @auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32, the exported getToken() helper in the next-auth/jwt and @auth/core/jwt modules can throw an uncaught exception when it reads a malformed Authorization: Bearer header. When no session cookie is present, getToken() URL-decodes the bearer value before validating it, and malformed percent encoding causes decodeURIComponent() to throw instead of treating the token as invalid. Because getToken() is commonly called in API routes, middleware, and server-side request handlers, a single unauthenticated request can trigger an unhandled exception in code paths that authenticate requests, causing a per-request denial of service without exposing tokens, sessions, or other data and without bypassing authentication. This issue is fixed in @auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32. |
| Uncaught exception for some Intel(R) TDX modules within Ring 0: Trust Domain may allow a denial of service. System software adversary with a privileged user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| A vulnerability in the Remote Access SSL VPN service for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to insufficient error checking when processing HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the Remote Access SSL VPN service on an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to ineffective memory management of the VPN web server. An attacker could exploit this vulnerability by sending a large number of crafted HTTP requests to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
