| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()
If the allocation of fp[i].tpa_info fails, the error path will not free
the struct bnx2x_fastpath allocated earlier, as it is not linked to the
bp structure yet. Fix that by linking it immediately after allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Free BPID bitmap on setup failure
nix_setup_bpids() allocates bp->bpids with rvu_alloc_bitmap(), which uses
a plain kcalloc(). If any of the following devm_kcalloc() allocations for
the BPID mapping arrays fails, the function returns without freeing the
bitmap. Free the BPID bitmap before returning from those error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix refcount leak in efct_hw_io_abort()
When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path
returns -ENOSPC without releasing the reference obtained via
kref_get_unless_zero() earlier in the function. All other error paths
correctly drop the reference. This causes a permanent reference leak on the
io_to_abort object.
Additionally, the abort_in_progress flag is left set to true on this path,
which means future abort attempts for the same I/O will immediately return
-EINPROGRESS even though the abort was never submitted, effectively
blocking recovery.
Fix this by adding the missing kref_put() call and reset abort_in_progress
to false, matching the cleanup done in the efct_hw_wq_write() failure path
below. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: topology: fix memory leak in snd_sof_load_topology
When the topology filename contains "dummy" and tplg_cnt is 0, the
function returns -EINVAL directly without freeing the tplg_files
allocated by kcalloc() at line 2497. This leaks memory on every
such topology load attempt.
Fix this by setting ret = -EINVAL and jumping to the out: label,
which already handles the kfree(tplg_files) cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix refcount leak in i_ipmi_request()
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count operations when a
supplied recv_msg with a valid user pointer is present in the error
path: decrement nr_msgs and drop the user's kref. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix cas_ctl leak on spi_async failure
ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC)
and relies entirely on the SPI completion callback
ca8210_spi_transfer_complete() to free it.
The spi_async() API only invokes the completion callback on successful
submission. On failure it returns a negative error code without ever
queuing the callback, which leaves cas_ctl and its embedded spi_message
and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is
inside the completion callback, so there is no other reclamation path.
ca8210_spi_transfer() is called from ca8210_spi_exchange(), the
interrupt handler ca8210_interrupt_handler(), and from the retry path
inside the completion callback itself. The exchange and interrupt
handler paths loop on -EBUSY, so under sustained SPI bus contention
every retry iteration leaks a fresh cas_ctl (~600 bytes per
occurrence).
Fix it by freeing cas_ctl on the spi_async() error path. While here,
correct the misleading error string: the function calls spi_async(),
not spi_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ixp4xx_hss: fix duplicate HDLC netdev allocation
ixp4xx_hss_probe() allocates two HDLC netdevs. The first one is stored
in ndev, initialized, and registered with register_hdlc_device(). The
second one is stored in port->netdev and later used by the remove path
for unregister_hdlc_device() and free_netdev().
This means that the registered netdev is not the same object that is
unregistered and freed on remove. It also leaks the first allocation if
the second alloc_hdlcdev() call fails, and the first allocation is not
checked before ndev is used.
Older code allocated the HDLC netdev only once and stored the same object
in both the local variable and port->netdev. The buggy conversion split
this into two alloc_hdlcdev() calls. A later rename changed the local
variable name to ndev, but the underlying mismatch remained.
Fix this by allocating the HDLC netdev only once and assigning the same
object to port->netdev. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: destroy DMA pool on CLDMA late init failure
t7xx_cldma_late_init() creates md_ctrl->gpd_dmapool before
initializing the TX and RX rings. If any ring initialization
fails, the error path frees the already initialized rings but
leaves the DMA pool allocated.
Destroy md_ctrl->gpd_dmapool on the late-init failure path
to avoid leaking the DMA pool. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup()
The memory allocated for mboxq using mempool_alloc() is not freed in
some of the early exit error paths. Fix that by moving the
mempool_free() call to an earlier point after last use. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Free arenas on btt_init() error paths
The arenas allocated by discover_arenas() or create_arenas() are not
freed on some error paths in btt_init(). This leaks memory when BTT
initialization fails.
Call free_arenas() from the affected error paths to release the
allocations.
[ as: commit message and log edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: uvesafb: fix potential memory leak in uvesafb_probe()
Due to an incorrect goto label, memory allocated for modedb and modelist
in uvesafb_vbe_init() is not freed in some error paths. Fix this by
updating the goto label. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: carminefb: fix potential memory leak in alloc_carmine_fb()
The memory allocated for modelist in fb_videomode_to_modelist() is not
freed in the subsequent error path.
Fix that by calling fb_destroy_modelist() |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/intel/tpmi: use cleanup helpers in mem_write()
In mem_write(), the temporary array returned by
parse_int_array_user() must be released on all exit paths.
Convert the array variable to use cleanup.h scope-based
cleanup so it is freed automatically on return.
This also moves the array declaration next to
parse_int_array_user() as required by cleanup.h usage
guidelines. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: put stats for scheme_add_dirs() internal error
damon_sysfs_scheme_add_dirs() setup the tried_regions directory after the
stats directory setup is completed. When the tried_regions directory
setup is failed, the setup function ensures the reference for the tried
regions directory is released. Hence the error path should put references
on setup succeeded directory objects, starting from the stats directory.
However, the error path is putting the tried_regions directory instead of
the stats directory.
As a direct result, the stats directory object is leaked. Worse yet, if
the tried_regions directory setup failed from the initial allocation, the
scheme->tried_regions field remains uninitialized. The following
kobject_put(&scheme->tried_regions->kobj) call in the error path will
dereference the uninitialized memory. The setup failures should not be
common. But once it happens, the consequence is quite bad.
Fix this issue by correctly putting the stats directory instead of the
tried_regions directory.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: free volume-wide resources on fill_super failure
ntfs_fill_super()'s err_out_now path frees only the volume struct via
kfree(vol), leaving several vol-owned allocations behind on every mount
failure:
- vol->nls_map, loaded by ntfs_init_fs_context() via
load_nls_default() (or replaced by an explicit nls= option in
ntfs_parse_param()), is never unload_nls()'d.
- vol->volume_label, allocated by load_system_files() through
ntfs_ucstonls() once the $Volume name attribute has been parsed, is
not released by load_system_files()'s own error labels nor by the
fill_super() inline cleanup that only runs on d_make_root()
failure. Any later failure inside load_system_files() leaks it.
- vol->lcn_empty_bits_per_page was kvfree()'d in
unl_upcase_iput_tmp_ino_err_out_now without clearing the pointer,
so it could not be folded into a single common cleanup.
Because the failure paths never call ntfs_volume_free() and never reach
the d_make_root() inline cleanup block (it sits above the label and is
jumped over by the load_system_files() / kvmalloc failure gotos), these
resources accumulate per failed mount attempt with no chance of
recovery short of unloading the module. This is a silent leak: the
inodes loaded prior to failure remain hashed but generic_shutdown_super()
skips evict_inodes() when sb->s_root is unset, so no CHECK_DATA_CORRUPTION
warning is emitted either.
Move the per-volume frees down to err_out_now and drop the
lcn_empty_bits_per_page kvfree() from the upper label so the cleanup is
performed exactly once on every failure path. Using unconditional
kvfree() / kfree() / unload_nls() is safe because they all accept NULL
and the upper labels that previously freed nls_map (the d_make_root()
inline cleanup) already clear the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: Plug nlm_file leak when nlm_do_fopen() fails
A client can repeatedly drive nlm_do_fopen() failures by presenting
file handles that the underlying export rejects. After kzalloc_obj()
succeeds in nlm_lookup_file(), the freshly allocated nlm_file is not
yet inserted into nlm_files[]. The nlm_do_fopen() failure path jumps
to out_unlock, which releases nlm_file_mutex and returns without
freeing the allocation, so each failure leaks one nlm_file.
Route the failure through out_free so kfree() runs before the
function returns. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: clean untagged VLAN on netdev registration failure
When an mesh interface is registered, it creates an untagged struct
batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in
this process, another receiver of this notification can veto the
registration. The netdev registration will be aborted because of this veto.
The register_netdevice() call will try to clean up the net_device using
unregister_netdevice_queue() - which only uses the .priv_destructor to
free private resources. In this situation, .dellink will not be called.
The cleanup of the untagged batadv_meshif_vlan must thefore be done in the
destructor to avoid a leak of this object. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8192: Release reserved memory on cleanup
The MT8192 AFE probe calls of_reserved_mem_device_init() and falls
back to preallocated buffers when no reserved memory region is
available. When the reserved memory assignment succeeds, however, the
driver never releases it.
Register a devm cleanup action after a successful reserved-memory
assignment so the assignment is released on probe failure and driver
unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tridentfb: fix potential memory leak in trident_pci_probe()
In trident_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist(). |
