| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A bug in POST request handling causes a crash under a certain condition.
This issue affects Apache Traffic Server: from 10.0.0 through 10.1.1, from 9.0.0 through 9.2.12.
Users are recommended to upgrade to version 10.1.2 or 9.2.13, which fix the issue.
A workaround for older versions is to set proxy.config.http.request_buffer_enabled to 0 (the default value is 0). |
| A logic issue was addressed with improved state management. This issue is fixed in iOS 18.7 and iPadOS 18.7, iOS 26 and iPadOS 26, macOS Sequoia 15.7, macOS Sonoma 14.8, macOS Tahoe 26, tvOS 26, visionOS 26, watchOS 26. A UDP server socket bound to a local interface may become bound to all interfaces. |
| OpenSSH before 10.3 mishandles the authorized_keys principals option in uncommon scenarios involving a principals list in conjunction with a Certificate Authority that makes certain use of comma characters. |
| OpenSSH before 10.3 can use unintended ECDSA algorithms. Listing of any ECDSA algorithm in PubkeyAcceptedAlgorithms or HostbasedAcceptedAlgorithms is misinterpreted to mean all ECDSA algorithms. |
| Nest is a framework for building scalable Node.js server-side applications. In versions 11.1.15 and below, a NestJS application using @nestjs/platform-fastify GET middleware can be bypassed because Fastify automatically redirects HEAD requests to the corresponding GET handlers (if they exist). As a result: middleware will be completely skipped, the HTTP response won't include a body (since the response is truncated when redirecting a HEAD request to a GET handler), and the actual handler will still be executed. This issue is fixed in version 11.1.16. |
| PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, A logic error in the PX4 Autopilot MAVLink FTP session validation uses incorrect boolean logic (&& instead of ||), allowing BurstReadFile and WriteFile operations to proceed with invalid sessions or closed file descriptors. This enables an unauthenticated attacker to put the FTP subsystem into an inconsistent state, trigger operations on invalid file descriptors, and bypass session isolation checks. This vulnerability is fixed in 1.17.0-rc2. |
| Always-Incorrect Control Flow Implementation vulnerability in Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-ENET/IP Ethernet Module FX5-ENET/IP versions 1.106 and prior and Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-EIP EtherNet/IP Module FX5-EIP all versions allows a remote attacker to cause a denial-of-service (DoS) condition on the products by continuously sending UDP packets to the products. A system reset of the product is required for recovery. |
| soroban-sdk is a Rust SDK for Soroban contracts. Prior to versions 22.0.10, 23.5.2, and 25.1.1, the `#[contractimpl]` macro contains a bug in how it wires up function calls. `#[contractimpl]` generates code that uses `MyContract::value()` style calls even when it's processing the trait version. This means if an inherent function is also defined with the same name, the inherent function gets called instead of the trait function. This means the Wasm-exported entry point silently calls the wrong function when two conditions are met simultaneously: First, an `impl Trait for MyContract` block is defined with one or more functions, with `#[contractimpl]` applied. Second, an `impl MyContract` block is defined with one or more identically named functions, without `#[contractimpl]` applied. If the trait version contains important security checks, such as verifying the caller is authorized, that the inherent version does not, those checks are bypassed. Anyone interacting with the contract through its public interface will call the wrong function. The problem is patched in `soroban-sdk-macros` versions 22.0.10, 23.5.2, and 25.1.1. The fix changes the generated call from `<Type>::func()` to `<Type as Trait>::func()` when processing trait implementations, ensuring Rust resolves to the trait associated function regardless of whether an inherent function with the same name exists. Users should upgrade to `soroban-sdk-macros` 22.0.10, 23.5.2, or 25.1.1 and recompile their contracts. If upgrading is not immediately possible, contract developers can avoid the issue by ensuring that no inherent associated function on the contract type shares a name with any function in the trait implementation. Renaming or removing the conflicting inherent function eliminates the ambiguity and causes the macro-generated code to correctly resolve to the trait function. |
| Incorrect placement of a preprocessor directive in source code results
in logic that doesn't operate as intended when support for HVM guests is
compiled out of Xen.
|
| In the Linux kernel, the following vulnerability has been resolved:
mm: call the security_mmap_file() LSM hook in remap_file_pages()
The remap_file_pages syscall handler calls do_mmap() directly, which
doesn't contain the LSM security check. And if the process has called
personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for
RW pages, this will actually result in remapping the pages to RWX,
bypassing a W^X policy enforced by SELinux.
So we should check prot by security_mmap_file LSM hook in the
remap_file_pages syscall handler before do_mmap() is called. Otherwise, it
potentially permits an attacker to bypass a W^X policy enforced by
SELinux.
The bypass is similar to CVE-2016-10044, which bypass the same thing via
AIO and can be found in [1].
The PoC:
$ cat > test.c
int main(void) {
size_t pagesz = sysconf(_SC_PAGE_SIZE);
int mfd = syscall(SYS_memfd_create, "test", 0);
const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE,
MAP_SHARED, mfd, 0);
unsigned int old = syscall(SYS_personality, 0xffffffff);
syscall(SYS_personality, READ_IMPLIES_EXEC | old);
syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0);
syscall(SYS_personality, old);
// show the RWX page exists even if W^X policy is enforced
int fd = open("/proc/self/maps", O_RDONLY);
unsigned char buf2[1024];
while (1) {
int ret = read(fd, buf2, 1024);
if (ret <= 0) break;
write(1, buf2, ret);
}
close(fd);
}
$ gcc test.c -o test
$ ./test | grep rwx
7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted)
[PM: subject line tweaks] |
| NVIDIA DGX Spark GB10 contains a vulnerability in SROOT firmware, where an attacker could cause incorrect control flow behavior. A successful exploit of this vulnerability might lead to data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Prevent sending WMI commands to firmware during firmware crash
Currently, we encounter the following kernel call trace when a firmware
crash occurs. This happens because the host sends WMI commands to the
firmware while it is in recovery, causing the commands to fail and
resulting in the kernel call trace.
Set the ATH12K_FLAG_CRASH_FLUSH and ATH12K_FLAG_RECOVERY flags when the
host driver receives the firmware crash notification from MHI. This
prevents sending WMI commands to the firmware during recovery.
Call Trace:
<TASK>
dump_stack_lvl+0x75/0xc0
register_lock_class+0x6be/0x7a0
? __lock_acquire+0x644/0x19a0
__lock_acquire+0x95/0x19a0
lock_acquire+0x265/0x310
? ath12k_ce_send+0xa2/0x210 [ath12k]
? find_held_lock+0x34/0xa0
? ath12k_ce_send+0x56/0x210 [ath12k]
_raw_spin_lock_bh+0x33/0x70
? ath12k_ce_send+0xa2/0x210 [ath12k]
ath12k_ce_send+0xa2/0x210 [ath12k]
ath12k_htc_send+0x178/0x390 [ath12k]
ath12k_wmi_cmd_send_nowait+0x76/0xa0 [ath12k]
ath12k_wmi_cmd_send+0x62/0x190 [ath12k]
ath12k_wmi_pdev_bss_chan_info_request+0x62/0xc0 [ath1
ath12k_mac_op_get_survey+0x2be/0x310 [ath12k]
ieee80211_dump_survey+0x99/0x240 [mac80211]
nl80211_dump_survey+0xe7/0x470 [cfg80211]
? kmalloc_reserve+0x59/0xf0
genl_dumpit+0x24/0x70
netlink_dump+0x177/0x360
__netlink_dump_start+0x206/0x280
genl_family_rcv_msg_dumpit.isra.22+0x8a/0xe0
? genl_family_rcv_msg_attrs_parse.isra.23+0xe0/0xe0
? genl_op_lock.part.12+0x10/0x10
? genl_dumpit+0x70/0x70
genl_rcv_msg+0x1d0/0x290
? nl80211_del_station+0x330/0x330 [cfg80211]
? genl_get_cmd_both+0x50/0x50
netlink_rcv_skb+0x4f/0x100
genl_rcv+0x1f/0x30
netlink_unicast+0x1b6/0x260
netlink_sendmsg+0x31a/0x450
__sock_sendmsg+0xa8/0xb0
____sys_sendmsg+0x1e4/0x260
___sys_sendmsg+0x89/0xe0
? local_clock_noinstr+0xb/0xc0
? rcu_is_watching+0xd/0x40
? kfree+0x1de/0x370
? __sys_sendmsg+0x7a/0xc0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
signal: restore the override_rlimit logic
Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of
ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of
signals. However now it's enforced unconditionally, even if
override_rlimit is set. This behavior change caused production issues.
For example, if the limit is reached and a process receives a SIGSEGV
signal, sigqueue_alloc fails to allocate the necessary resources for the
signal delivery, preventing the signal from being delivered with siginfo.
This prevents the process from correctly identifying the fault address and
handling the error. From the user-space perspective, applications are
unaware that the limit has been reached and that the siginfo is
effectively 'corrupted'. This can lead to unpredictable behavior and
crashes, as we observed with java applications.
Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip
the comparison to max there if override_rlimit is set. This effectively
restores the old behavior. |
| A vulnerability in IPv6 traffic processing of Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a Layer 2 (L2) loop in a configured VLAN, resulting in a denial of service (DoS) condition for that VLAN. The vulnerability is due to a logic error when processing specific link-local IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that would flow inbound through the wired interface of an affected device. A successful exploit could allow the attacker to cause traffic drops in the affected VLAN, thus triggering the DoS condition. |
| HCL Traveler for Microsoft Outlook (HTMO) is susceptible to a control flow vulnerability. The application does not sufficiently manage its control flow during execution, creating conditions in which the control flow can be modified in unexpected ways. |
| there is a possible way to bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation. |
| In http-proxy-middleware before 2.0.8 and 3.x before 3.0.4, writeBody can be called twice because "else if" is not used. |
| Missing validation of terminating delegation causes the client to continue searching the defined delegation list, even after searching a terminating delegation. This could cause the client to fetch a target from an incorrect source, altering the target contents. Users should upgrade to tough version 0.20.0 or later and ensure any forked or derivative code is patched to incorporate the new fixes. |
| SSH Tectia Server before 6.6.6 sometimes allows attackers to read and alter a user's session traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx93-blk-ctrl: correct remove path
The check condition should be 'i < bc->onecell_data.num_domains', not
'bc->onecell_data.num_domains' which will make the look never finish
and cause kernel panic.
Also disable runtime to address
"imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!" |
