| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The sanity_check_raw_super function in fs/f2fs/super.c in the Linux kernel before 4.11.1 does not validate the segment count, which allows local users to gain privileges via unspecified vectors. |
| The dynamicGetbuf function in the GD Graphics Library (aka libgd) before 2.2.4 allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted TIFF image. |
| A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795. |
| A vulnerability in SMART-SSL Accelerator functionality for Cisco Wide Area Application Services (WAAS) 6.2.1, 6.2.1a, and 6.2.3a could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition where the WAN optimization could stop functioning while the process restarts. The vulnerability is due to a Secure Sockets Layer/Transport Layer Security (SSL/TLS) alert being incorrectly handled when in a specific SSL/TLS connection state. An attacker could exploit this vulnerability by establishing a SMART-SSL connection through the targeted device. The attacker would then send a crafted stream of SSL/TLS traffic. An exploit could allow the attacker to cause a DoS condition where WAN optimization could stop processing traffic for a short period of time. Cisco Bug IDs: CSCvb71133. |
| The sanity_check_ckpt function in fs/f2fs/super.c in the Linux kernel before 4.12.4 does not validate the blkoff and segno arrays, which allows local users to gain privileges via unspecified vectors. |
| A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. |
| NSD before 4.1.11 allows remote DNS master servers to cause a denial of service (/tmp disk consumption and slave server crash) via a zone transfer with unlimited data. |
| mod_ns in Red Hat Enterprise Linux Desktop 7, Red Hat Enterprise Linux HPC Node 7, Red Hat Enterprise Linux Server 7, and Red Hat Enterprise Linux Workstation 7 allows remote attackers to force the use of ciphers that were not intended to be enabled. |
| A vulnerability in the received packet parser of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) software could allow an unauthenticated, remote attacker to cause a reload of the affected system, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient size validation of user-supplied data. An attacker could exploit this vulnerability by sending crafted H.224 data in Real-Time Transport Protocol (RTP) packets in an H.323 call. An exploit could allow the attacker to overflow a buffer in a cache that belongs to the received packet parser, which will result in a crash of the application, resulting in a DoS condition. All versions of Cisco Expressway Series Software and Cisco TelePresence VCS Software prior to version X8.8.2 are vulnerable. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCus99263. |
| tcprewrite in tcpreplay before 4.1.2 allows remote attackers to cause a denial of service (segmentation fault) via a large frame, a related issue to CVE-2017-14266. |
| A denial of service vulnerability in Mediaserver could enable an attacker to use a specially crafted file to cause a device hang or reboot. This issue is rated as High due to the possibility of remote denial of service. Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0. Android ID: A-31681434. |
| A vulnerability in the wireless controller manager of Cisco IOS XE could allow an unauthenticated, adjacent attacker to cause a restart of the switch and result in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted association request. An exploit could allow the attacker to cause the switch to restart. This vulnerability affects Cisco Catalyst 3650 and 3850 switches running IOS XE Software versions 16.1 through 16.3.3, and acting as wireless LAN controllers (WLC). Cisco Bug IDs: CSCvd45069. |
| A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803. |
| Cisco IOS before 15.2(4)S6 does not initialize an unspecified variable, which might allow remote authenticated users to cause a denial of service (CPU consumption, watchdog timeout, crash) by walking specific SNMP objects. |
| By flooding a Juniper Networks router running Junos OS with specially crafted IPv6 traffic, all available resources can be consumed, leading to the inability to store next hop information for legitimate traffic. In extreme cases, the crafted IPv6 traffic may result in a total resource exhaustion and kernel panic. The issue is triggered by traffic destined to the router. Transit traffic does not trigger the vulnerability. This issue only affects devices with IPv6 enabled and configured. Devices not configured to process IPv6 traffic are unaffected by this vulnerability. This issue was found during internal product security testing. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. Affected releases are Juniper Networks Junos OS 11.4 prior to 11.4R13-S3; 12.3 prior to 12.3R3-S4; 12.3X48 prior to 12.3X48-D30; 13.3 prior to 13.3R10, 13.3R4-S11; 14.1 prior to 14.1R2-S8, 14.1R4-S12, 14.1R8; 14.1X53 prior to 14.1X53-D28, 14.1X53-D40; 14.1X55 prior to 14.1X55-D35; 14.2 prior to 14.2R3-S10, 14.2R4-S7, 14.2R6; 15.1 prior to 15.1F2-S5, 15.1F5-S2, 15.1F6, 15.1R3; 15.1X49 prior to 15.1X49-D40; 15.1X53 prior to 15.1X53-D57, 15.1X53-D70. |
| Apache Xerces-C++ allows remote attackers to cause a denial of service (CPU consumption) via a crafted message sent to an XML service that causes hash table collisions. |
| A HTTP/2 implementation built using any version of the Python priority library prior to version 1.2.0 could be targeted by a malicious peer by having that peer assign priority information for every possible HTTP/2 stream ID. The priority tree would happily continue to store the priority information for each stream, and would therefore allocate unbounded amounts of memory. Attempting to actually use a tree like this would also cause extremely high CPU usage to maintain the tree. |
| An IKE Packet Parsing Denial of Service Vulnerability in the ipsecmgr process of Cisco ASR 5000 Software could allow an unauthenticated, remote attacker to cause the ipsecmgr process to reload. More Information: CSCuy06917 CSCuy45036 CSCuy59525. Known Affected Releases: 20.0.0 20.0.M0.62842 20.0.v0 20.0.M0.63229 20.1.0 20.1.a0 20.1.v0 21.0.0 21.0.v0. Known Fixed Releases: 20.0.0 20.0.0.63250 20.0.M0.63148 20.0.R0.63294 20.0.R0.63316 20.0.V0.63170 20.0.VG0.63188 20.0.v0 20.0.v0.64175 20.0.vg0.63522 20.1.A0.63166 20.2.A0.63174 20.1.A0.63232 20.2.A0.63237 20.0.M0.63226 20.0.M0.63229 20.0.R0.63294 20.0.R0.63316 20.0.V0.63263 20.0.VG0.63233 20.0.v0 20.0.v0.64175 20.0.vg0.63522 20.1.0 20.1.0.63959 20.1.M0.63876 20.1.T0.63886 20.1.V0.64231 20.1.VA0.64194 20.1.VB0.64210 20.1.a0 20.1.a0.64023 20.1.v0 20.1.v0.64607 20.2.A0.63895 21.0.0 21.0.0.65256 21.0.M0.63881 21.0.M0.64281 21.0.PP0.64366 21.0.V0.65052 21.0.v0 21.0.v0.65831 21.0.vb0.65887 21.1.R0.65130 21.1.R0.65135. |
| A vulnerability in RADIUS Change of Authorization (CoA) request processing in the Cisco Wireless LAN Controller (WLC) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition by disconnecting a single connection. This vulnerability affects Cisco Wireless LAN Controller running software release 8.3.102.0. More Information: CSCvb01835. Known Fixed Releases: 8.4(1.49) 8.3(111.0) 8.3(108.0) 8.3(104.24) 8.3(102.3). |
| Huawei Eudemon8000E firewall with software V200R001C01SPC800 and earlier versions allows users to log in to the device using Telnet or SSH. When an attacker sends to the device a mass of TCP packets with special structure, the logging process becomes slow and users may be unable to log in to the device. |
