| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Check set_default_submission() before deferencing
When the i915 driver firmware binaries are not present, the
set_default_submission pointer is not set. This pointer is
dereferenced during suspend anyways.
Add a check to make sure it is set before dereferencing.
[ 23.289926] PM: suspend entry (deep)
[ 23.293558] Filesystems sync: 0.000 seconds
[ 23.298010] Freezing user space processes
[ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds)
[ 23.309766] OOM killer disabled.
[ 23.313027] Freezing remaining freezable tasks
[ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 23.342038] serial 00:05: disabled
[ 23.345719] serial 00:02: disabled
[ 23.349342] serial 00:01: disabled
[ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 23.361635] ata1.00: Entering standby power mode
[ 23.368863] ata2.00: Entering standby power mode
[ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 23.452194] #PF: supervisor instruction fetch in kernel mode
[ 23.457896] #PF: error_code(0x0010) - not-present page
[ 23.463065] PGD 0 P4D 0
[ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI
[ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary)
[ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 23.496511] Workqueue: async async_run_entry_fn
[ 23.501087] RIP: 0010:0x0
[ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246
[ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f
[ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000
[ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff
[ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8
[ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68
[ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000
[ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0
[ 23.572539] PKRU: 55555554
[ 23.575281] Call Trace:
[ 23.577770] <TASK>
[ 23.579905] intel_engines_reset_default_submission+0x42/0x60
[ 23.585695] __intel_gt_unset_wedged+0x191/0x200
[ 23.590360] intel_gt_unset_wedged+0x20/0x40
[ 23.594675] gt_sanitize+0x15e/0x170
[ 23.598290] i915_gem_suspend_late+0x6b/0x180
[ 23.602692] i915_drm_suspend_late+0x35/0xf0
[ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10
[ 23.611843] dpm_run_callback+0x78/0x1c0
[ 23.615817] device_suspend_late+0xde/0x2e0
[ 23.620037] async_suspend_late+0x18/0x30
[ 23.624082] async_run_entry_fn+0x25/0xa0
[ 23.628129] process_one_work+0x15b/0x380
[ 23.632182] worker_thread+0x2a5/0x3c0
[ 23.635973] ? __pfx_worker_thread+0x10/0x10
[ 23.640279] kthread+0xf6/0x1f0
[ 23.643464] ? __pfx_kthread+0x10/0x10
[ 23.647263] ? __pfx_kthread+0x10/0x10
[ 23.651045] ret_from_fork+0x131/0x190
[ 23.654837] ? __pfx_kthread+0x10/0x10
[ 23.658634] ret_from_fork_asm+0x1a/0x30
[ 23.662597] </TASK>
[ 23.664826] Modules linked in:
[ 23.667914] CR2: 0000000000000000
[ 23.671271] ------------[ cut here ]------------
(cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad) |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix NULL dereference on notify error path
Since commit b5daf93b809d1 ("firmware: arm_scmi: Avoid notifier
registration for unsupported events") the call chains leading to the helper
__scmi_event_handler_get_ops expect an ERR_PTR to be returned on failure to
get an handler for the requested event key, while the current helper can
still return a NULL when no handler could be found or created.
Fix by forcing an ERR_PTR return value when the handler reference is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: cp2615: fix serial string NULL-deref at probe
The cp2615 driver uses the USB device serial string as the i2c adapter
name but does not make sure that the string exists.
Verify that the device has a serial number before accessing it to avoid
triggering a NULL-pointer dereference (e.g. with malicious devices). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
syzbot reported static_branch_dec() underflow in aql_enable_write(). [0]
The problem is that aql_enable_write() does not serialise concurrent
write()s to the debugfs.
aql_enable_write() checks static_key_false(&aql_disable.key) and
later calls static_branch_inc() or static_branch_dec(), but the
state may change between the two calls.
aql_disable does not need to track inc/dec.
Let's use static_branch_enable() and static_branch_disable().
[0]:
val == 0
WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288
Modules linked in:
CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full)
Tainted: [U]=USER, [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311
Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00
RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4
RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a
R13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98
FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline]
__static_key_slow_dec kernel/jump_label.c:321 [inline]
static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336
aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343
short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383
vfs_write+0x2aa/0x1070 fs/read_write.c:684
ksys_pwrite64 fs/read_write.c:793 [inline]
__do_sys_pwrite64 fs/read_write.c:801 [inline]
__se_sys_pwrite64 fs/read_write.c:798 [inline]
__x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f530cf9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012
RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9
RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010
RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
Fix rxgk_verify_response() to clean up the rxgk context it creates. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix reference count leak in rxrpc_server_keyring()
This patch fixes a reference count leak in rxrpc_server_keyring()
by checking if rx->securities is already set. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled
Keep the NOC_HDCP clock always enabled to fix the potential hang
caused by the NoC ADB400 port power down handshake. |
| In the Linux kernel, the following vulnerability has been resolved:
net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()
When dma_map_single() fails in tse_start_xmit(), the function returns
NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the
stack the packet was consumed, the skb is never freed, leaking memory
on every DMA mapping failure.
Add dev_kfree_skb_any() before returning to properly free the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: allocate rx skb before consuming bytes
pn532_receive_buf() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already hand
a complete frame to pn533_recv_frame() before allocating a fresh receive
buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: Fix dma_free_coherent() size
dma_alloc_consistent() may change the size to align it. The new size is
saved in alloced.
Change the free size to match the allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/platform/uv: Handle deconfigured sockets
When a socket is deconfigured, it's mapped to SOCK_EMPTY (0xffff). This causes
a panic while allocating UV hub info structures.
Fix this by using NUMA_NO_NODE, allowing UV hub info structures to be
allocated on valid nodes. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix deadlock during netdev reset with active connections
Resolve deadlock that occurs when user executes netdev reset while RDMA
applications (e.g., rping) are active. The netdev reset causes ice
driver to remove irdma auxiliary driver, triggering device_delete and
subsequent client removal. During client removal, uverbs_client waits
for QP reference count to reach zero while cma_client holds the final
reference, creating circular dependency and indefinite wait in iWARP
mode. Skip QP reference count wait during device reset to prevent
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Unlink NV12 planes earlier
unlink_nv12_plane() will clobber parts of the plane state
potentially already set up by plane_atomic_check(), so we
must make sure not to call the two in the wrong order.
The problem happens when a plane previously selected as
a Y plane is now configured as a normal plane by user space.
plane_atomic_check() will first compute the proper plane
state based on the userspace request, and unlink_nv12_plane()
later clears some of the state.
This used to work on account of unlink_nv12_plane() skipping
the state clearing based on the plane visibility. But I removed
that check, thinking it was an impossible situation. Now when
that situation happens unlink_nv12_plane() will just WARN
and proceed to clobber the state.
Rather than reverting to the old way of doing things, I think
it's more clear if we unlink the NV12 planes before we even
compute the new plane state.
(cherry picked from commit 017ecd04985573eeeb0745fa2c23896fb22ee0cc) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: make use of smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix missing runtime PM reference in ccs_mode_store
ccs_mode_store() calls xe_gt_reset() which internally invokes
xe_pm_runtime_get_noresume(). That function requires the caller
to already hold an outer runtime PM reference and warns if none
is held:
[46.891177] xe 0000:03:00.0: [drm] Missing outer runtime PM protection
[46.891178] WARNING: drivers/gpu/drm/xe/xe_pm.c:885 at
xe_pm_runtime_get_noresume+0x8b/0xc0
Fix this by protecting xe_gt_reset() with the scope-based
guard(xe_pm_runtime)(xe), which is the preferred form when
the reference lifetime matches a single scope.
v2:
- Use scope-based guard(xe_pm_runtime)(xe) (Shuicheng)
- Update commit message accordingly
(cherry picked from commit 7937ea733f79b3f25e802a0c8360bf7423856f36) |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cpu: Remove X86_CR4_FRED from the CR4 pinned bits mask
Commit in Fixes added the FRED CR4 bit to the CR4 pinned bits mask so
that whenever something else modifies CR4, that bit remains set. Which
in itself is a perfectly fine idea.
However, there's an issue when during boot FRED is initialized: first on
the BSP and later on the APs. Thus, there's a window in time when
exceptions cannot be handled.
This becomes particularly nasty when running as SEV-{ES,SNP} or TDX
guests which, when they manage to trigger exceptions during that short
window described above, triple fault due to FRED MSRs not being set up
yet.
See Link tag below for a much more detailed explanation of the
situation.
So, as a result, the commit in that Link URL tried to address this
shortcoming by temporarily disabling CR4 pinning when an AP is not
online yet.
However, that is a problem in itself because in this case, an attack on
the kernel needs to only modify the online bit - a single bit in RW
memory - and then disable CR4 pinning and then disable SM*P, leading to
more and worse things to happen to the system.
So, instead, remove the FRED bit from the CR4 pinning mask, thus
obviating the need to temporarily disable CR4 pinning.
If someone manages to disable FRED when poking at CR4, then
idt_invalidate() would make sure the system would crash'n'burn on the
first exception triggered, which is a much better outcome security-wise. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib
amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence
from amdgpu_ib_schedule(). This fence is used to wait for job
completion.
Currently, the code drops the fence reference using dma_fence_put()
before calling dma_fence_wait().
If dma_fence_put() releases the last reference, the fence may be
freed before dma_fence_wait() is called. This can lead to a
use-after-free.
Fix this by waiting on the fence first and releasing the reference
only after dma_fence_wait() completes.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696)
(cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482) |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix call removal to use RCU safe deletion
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs. |
