| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm_mpam: guard MBWU state before adding it to garbage
__destroy_component_cfg() adds each RIS mbwu_state object to the MPAM
garbage list when destroying component configuration.
However, mbwu_state is allocated per RIS and only for RISes with MBWU
monitors. A component can therefore have comp->cfg allocated while some
RISes still have ris->mbwu_state set to NULL.
Passing a NULL mbwu_state to add_to_garbage() dereferences the NULL
pointer inside the macro.
Skip RISes that do not have an mbwu_state object before adding them to
the garbage list. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Stop device IO before calling hid_hw_stop
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin
In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set
unconditionally even when ath11k_core_qmi_firmware_ready() fails.
This leaves the driver in an inconsistent state where
initialization is considered complete although the firmware ready
handling did not finish successfully. During the subsequent SSR,
the driver enters the restart path based on this incorrect state
and dereferences uninitialized srng members, resulting in a NULL
pointer dereference.
Call trace:
ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P)
ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k]
ath11k_core_restart+0x40/0x168 [ath11k]
Fix this by:
- skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set
- setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds
- setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling
on error
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix ISM dc_lock deadlock during suspend
[Why]
System hang observed during suspend/resume while video is playing.
amdgpu_dm_ism_disable() is called under dc_lock and waits for ISM
delayed work via disable_delayed_work_sync(). The work handlers
themselves take dc_lock, producing an ABBA deadlock when a worker is
in flight at suspend time.
[How]
Split the disable path into two phases with opposite locking
contracts:
1. amdgpu_dm_ism_disable() -- quiesces workers, must NOT hold
dc_lock.
2. amdgpu_dm_ism_force_full_power() (new) -- drives the ISM FSM
back to FULL_POWER_RUNNING, must hold dc_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: synchronize delayed set_alt with teardown
The f_tcm set_alt() path defers endpoint setup to a work item and
completes the delayed status response from process context. The delayed
work uses f_tcm private state and may complete the setup request after
disconnect or function teardown has already moved on.
Cancel and drain the delayed set_alt work when the function is unbound or
freed. For disable paths, which are reached under the composite device
lock, use a small state machine and a non-sleeping cancellation path
instead of cancel_work_sync(). If the work is already running, mark it
cancelled and let the worker own the cleanup; otherwise tcm_disable() can
cancel the queued work and clean up immediately.
Also serialize the final delayed-status completion with the cancellation
check while holding the composite device lock. This prevents a disconnect
from clearing delayed_status while the worker is about to complete the
control request.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? tcm_delayed_set_alt+0x6c/0xef0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? tcm_delayed_set_alt+0x6c/0xef0
kasan_report+0xe0/0x110
? tcm_delayed_set_alt+0x6c/0xef0
tcm_delayed_set_alt+0x6c/0xef0
? __pfx_tcm_delayed_set_alt+0x10/0x10
? process_one_work+0x4cb/0xb90
? rcu_is_watching+0x20/0x50
? tcm_delayed_set_alt+0x9/0xef0
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_tcm_delayed_set_alt+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 544:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
tcm_alloc+0x68/0x180
usb_get_function+0x36/0x60
config_usb_cfg_link+0x125/0x1b0
configfs_symlink+0x322/0x890
vfs_symlink+0xc2/0x270
filename_symlinkat+0x295/0x2f0
__x64_sys_symlinkat+0x62/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 661:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x2f9/0x530
config_usb_cfg_unlink+0x173/0x1e0
configfs_unlink+0x1fa/0x340
vfs_unlink+0x15c/0x510
filename_unlinkat+0x2ba/0x450
__x64_sys_unlinkat+0x63/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Do not put borrowed of_node in probe
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.
The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately. |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS's CLI could allow an authenticated privileged user to execute arbitrary code via specially crafted IPSec configuration CLI commands. |
| A memory corruption vulnerability in WatchGuard Fireware OS may allow an unauthenticated attacker to trigger a Denial of Service (DoS) condition in the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer. |
| Missing Authorization vulnerability in Drupal Config Pages allows Forceful Browsing.
This issue affects Config Pages: from 0.0.0 before 2.18.0. |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS’s certificate request command could allow an authenticated privileged user to execute arbitrary code via specially crafted CLI commands. |
| A local privilege escalation vulnerability in the WatchGuard Mobile VPN with SSL client on Windows enables a local user to execute arbitrary commands with elevated privileges on the Windows system. This vulnerability is an additional unmitigated attack path for CVE-2024-4944.
This vulnerability is resolved in the Mobile VPN with SSL client for Windows version 12.11.5 |
| A vulnerability was determined in mifi lossless-cut up to 3.69.0. Affected by this issue is some unknown functionality of the file src/main/httpServer.ts of the component Built-in HTTP API Service. Executing a manipulation can lead to server-side request forgery. The attack requires access to the local network. This attack is characterized by high complexity. The exploitation is known to be difficult. The exploit has been publicly disclosed and may be utilized. This patch is called 260802348955231442c4bae6c2d9d8ede947af0a. It is best practice to apply a patch to resolve this issue. The project maintainer provides this view: "I'm not sure that this is a critical vulnerability, because it is behind an experimental CLI flag and the NTLM behavior isn't really a LosslessCut bug." The CVSS vector reflects the high level of pre-requisites. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Fix buffer overflow in steered register list allocation
The size calculation for the steered register extarray uses only the
geometry DSS mask (g_dss_mask) to determine the number of entries to
allocate:
total = bitmap_weight(gt->fuse_topo.g_dss_mask, ...) * steer_reg_num;
However, the filling loop uses for_each_dss_steering(), which iterates
over for_each_dss(), defined as the union of g_dss_mask and c_dss_mask
(geometry + compute DSS). On platforms with compute-only DSS bits, the
loop writes past the allocated buffer, corrupting adjacent slab objects.
This manifests as list_del corruption and SLUB redzone overwrites during
drm_managed_release on device unbind, since the overflow corrupts the
drmres list_head of neighboring allocations.
Fix by computing the allocation size using the union of both DSS masks,
matching the iteration pattern of for_each_dss_steering().
--
v2:
- use bitmap_weighted_or() (Zhanjun)
(cherry picked from commit 0a78a44f4901aa6c9263e66be7fce02282f1109f) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check amdgpu_vm_bo_find() result in GET_MAPPING_INFO
The AMDGPU_GEM_OP_GET_MAPPING_INFO path of amdgpu_gem_op_ioctl() looks
up the bo_va for the buffer object in the caller's VM via
amdgpu_vm_bo_find(), but uses the returned pointer without checking it.
amdgpu_vm_bo_find() returns NULL when the BO has no bo_va in that VM,
which is the normal case for a BO that has never been mapped. The result
is fed straight into amdgpu_vm_bo_va_for_each_valid_mapping(), which
expands to list_for_each_entry(mapping, &(bo_va)->valids, list) and
dereferences bo_va, causing a NULL pointer dereference.
This is reachable by any process able to issue the ioctl (render group)
simply by requesting mapping info for an unmapped BO.
Return -ENOENT when no bo_va is found, jumping to out_exec so the
drm_exec context and GEM object reference are released.
(cherry picked from commit 528b19377affc1cc7362a70a254c1dda793595f9) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx: fix cleaner shader IB buffer overflow
The cleaner shader sysfs path allocates a 16-dword (64 byte) IB but
incorrectly fills (align_mask + 1) dwords. On GFX rings align_mask is
0xff, so the loop wrote 256 dwords into a 64-byte buffer, causing a
kernel page fault.
The IB only needs to be a minimal NOP shell to schedule the job; the
cleaner shader itself is emitted on the ring via emit_cleaner_shader().
Fill 16 dwords to match the allocation.
v2: Use ib_size_dw variable (Lijo)
(cherry picked from commit bf21af331ebf72d0935fd70c73192414a422c03a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix buffer overflows in sideband chunk accumulation
drm_dp_sideband_append_payload() has three related bugs when processing
device-provided sideband reply data:
1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken
directly from the DP sideband header. If a device sends msg_len=0,
curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len)
is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow).
drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy()
writes 255 bytes into msg[], both far out of bounds.
2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is
only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks
until curchunk_idx reaches curchunk_len, writing up to 15 bytes past
the end of chunk[] into msg[].
3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to
msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256],
so the memcpy can spill into adjacent struct fields.
All three are reachable from any DP MST device that can forge sideband
reply messages on a physical connection. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix OOB reads in remote DPCD/I2C sideband reply parsers
drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw
message and then unconditionally does:
memcpy(bytes, &raw->msg[idx], num_bytes);
without checking that idx + num_bytes <= raw->curlen. raw->msg[] is
256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger
than the remaining payload, the memcpy reads past the received data
into whatever follows in raw->msg[].
drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted
with a /* TODO check */ comment since the code was introduced).
Fix both functions by using a single combined check
(idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8,
it is always >= 0, so this strictly subsumes the simpler idx > curlen
form and no separate step is needed.
[added missing fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which
drops and reacquires the socket lock. Its error path tries to decide
whether msg_tx names the local temporary message by comparing it with
the current value of psock->cork.
This comparison is unsafe when two threads send on the same socket:
Thread A Thread B
msg_tx = psock->cork
sk_msg_alloc() fails
sk_stream_wait_memory()
releases the socket lock acquires the socket lock
completes the cork
psock->cork = NULL
frees the cork
reacquires the socket lock
msg_tx != psock->cork
sk_msg_free(msg_tx)
The stale cork is therefore mistaken for the local temporary message
and freed again. KASAN reported:
BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50
Read of size 4 at addr ffff88810c908800 by task poc/90
Call Trace:
sk_msg_free+0x49/0x50
tcp_bpf_sendmsg+0x14f5/0x1cc0
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 89:
__kasan_kmalloc+0x8f/0xa0
tcp_bpf_sendmsg+0x16b3/0x1cc0
Freed by task 91:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
tcp_bpf_sendmsg+0xec3/0x1cc0
msg_tx can only name the stack-local tmp or the shared cork. Check for
tmp directly so a changed psock->cork cannot turn a shared message into
an apparent local one. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Fix memory leak in bpf_jit_free()
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts and
calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory
leak of the JIT context offsets array.
So fix this by adding the missing kvfree(jit_data->ctx.offset) in
bpf_jit_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix size calculations for 64-bit attributes
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).
On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.
However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.
This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.
Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. |
