| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NATS-Server is a High-Performance server for NATS.io, the cloud and edge native messaging system. In versions starting from 2.2.0 but prior to 2.10.27 and 2.11.1, the management of JetStream assets happens with messages in the $JS. subject namespace in the system account; this is partially exposed into regular accounts to allow account holders to manage their assets. Some of the JS API requests were missing access controls, allowing any user with JS management permissions in any account to perform certain administrative actions on any JS asset in any other account. At least one of the unprotected APIs allows for data destruction. None of the affected APIs allow disclosing stream contents. This vulnerability is fixed in v2.11.1 or v2.10.27. |
| A flaw was found in libsoup. The HTTP/2 server in libsoup may not fully validate the values of pseudo-headers :scheme, :authority, and :path, which may allow a user to cause a denial of service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, sun4ican_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on this line:
dlc = cf->len;
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs a
couple line below when doing:
for (i = 0; i < dlc; i++)
writel(cf->data[i], priv->base + (dreg + i * 4));
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow. |
| Missing Authorization vulnerability in realtyworkstation Realty Workstation realty-workstation allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Realty Workstation: from n/a through <= 1.0.45. |
| RabbitMQ is a messaging and streaming broker. Versions prior to 4.0.3 are vulnerable to a sophisticated attack that could modify virtual host name on disk and then make it unrecoverable (with other on disk file modifications) can lead to arbitrary JavaScript code execution in the browsers of management UI users. When a virtual host on a RabbitMQ node fails to start, recent versions
will display an error message (a notification) in the management UI. The error message includes virtual host name, which was not escaped prior to open source RabbitMQ 4.0.3 and Tanzu RabbitMQ 4.0.3, 3.13.8. An attack that both makes a virtual host fail to start and creates a new virtual host name with an XSS code snippet or changes the name of an existing virtual host on disk could trigger arbitrary JavaScript code execution in the management UI (the user's browser). Open source RabbitMQ `4.0.3` and Tanzu RabbitMQ `4.0.3` and `3.13.8` patch the issue. |
| A use-after-free type vulnerability was found in libsoup, in the soup_message_headers_get_content_disposition() function. This flaw allows a malicious HTTP client to cause memory corruption in the libsoup server. |
| In the Linux kernel, the following vulnerability has been resolved:
can: hi311x: populate ndo_change_mtu() to prevent buffer overflow
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, hi3110_hard_start_xmit() receives a CAN XL frame which it is
not able to correctly handle and will thus misinterpret it as a CAN
frame. The driver will consume frame->len as-is with no further
checks.
This can result in a buffer overflow later on in hi3110_hw_tx() on
this line:
memcpy(buf + HI3110_FIFO_EXT_DATA_OFF,
frame->data, frame->len);
Here, frame->len corresponds to the flags field of the CAN XL frame.
In our previous example, we set canxl_frame->flags to 0xff. Because
the maximum expected length is 8, a buffer overflow of 247 bytes
occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Abolfazl Sabagh rng-refresh rng-refresh allows Reflected XSS.This issue affects rng-refresh: from n/a through <= 1.0. |
| A flaw was found in libsoup, where SoupAuthDigest is vulnerable to a NULL pointer dereference. The HTTP server may cause the libsoup client to crash. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Michael Stursberg Browser-Update-Notify browser-update-notify allows Reflected XSS.This issue affects Browser-Update-Notify: from n/a through <= 0.2.1. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in ContentLocalized Translation.Pro translation-pro allows Reflected XSS.This issue affects Translation.Pro: from n/a through <= 1.0.0. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in faaiq Simple Custom post type custom field simple-content-construction-kit allows Reflected XSS.This issue affects Simple Custom post type custom field: from n/a through <= 1.0.3. |
| Shescape is a simple shell escape library for JavaScript. Versions 1.7.2 through 2.1.1 are vulnerable to potential environment variable exposure on Windows with CMD. This impact users of Shescape on Windows that explicitly configure `shell: 'cmd.exe'` or `shell: true` using any of `quote`/`quoteAll`/`escape`/`escapeAll`. An attacker may be able to get read-only access to environment variables. This bug has been patched in v2.1.2. For those who are already using v2 of Shescape, no further changes are required. Those who are are using v1 of Shescape should follow the migration guide to upgrade to v2. There is no plan to release a patch compatible with v1 of Shescape. As a workaround, users can remove all instances of `%` from user input before using Shescape. |
| A flaw was found in libsoup, where the soup_message_headers_get_content_disposition() function is vulnerable to a NULL pointer dereference. This flaw allows a malicious HTTP peer to crash a libsoup client or server that uses this function. |
| Cross-Site Request Forgery (CSRF) vulnerability in SpruceJoy Cookie Consent & Autoblock for GDPR/CCPA cookie-consent-autoblock allows Stored XSS.This issue affects Cookie Consent & Autoblock for GDPR/CCPA: from n/a through <= 1.0.1. |
| SmartOS, as used in Triton Data Center and other products, has static host SSH keys in the 60f76fd2-143f-4f57-819b-1ae32684e81b image (a Debian 12 LX zone image from 2024-07-26). |
| A flaw was found in libsoup, where the soup_multipart_new_from_message() function is vulnerable to an out-of-bounds read. This flaw allows a malicious HTTP client to induce the libsoup server to read out of bounds. |
| Cross-Site Request Forgery (CSRF) vulnerability in Ned Curated Search curated-search allows Stored XSS.This issue affects Curated Search: from n/a through <= 1.2. |
| Shearwater SecurEnvoy SecurAccess Enrol before 9.4.515 is intended to disable accounts that have had more than 10 failed authentication attempts, but instead allows hundreds of failed authentication attempts, because concurrent attempts are mishandled. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in templateinvaders TI WooCommerce Wishlist ti-woocommerce-wishlist allows Stored XSS.This issue affects TI WooCommerce Wishlist: from n/a through <= 2.10.0. |
