| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When HTTP/2 Ingress is configured, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When a per-request policy is configured on a BIG-IP APM portal access virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Null pointer dereference in Windows Client-Side Caching (CSC) Service allows an authorized attacker to elevate privileges locally. |
| A flaw has been found in skvadrik re2c up to 4.4. Impacted is the function check_and_merge_special_rules of the file src/parse/ast.cc. This manipulation causes null pointer dereference. The attack can only be executed locally. The exploit has been published and may be used. Patch name: febeb977936f9519a25d9fbd10ff8256358cdb97. It is suggested to install a patch to address this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: rate: Unset parent pointer in devl_rate_nodes_destroy
The function devl_rate_nodes_destroy is documented to "Unset parent for
all rate objects". However, it was only calling the driver-specific
`rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing
the parent's refcount, without actually setting the
`devlink_rate->parent` pointer to NULL.
This leaves a dangling pointer in the `devlink_rate` struct, which cause
refcount error in netdevsim[1] and mlx5[2]. In addition, this is
inconsistent with the behavior of `devlink_nl_rate_parent_node_set`,
where the parent pointer is correctly cleared.
This patch fixes the issue by explicitly setting `devlink_rate->parent`
to NULL after notifying the driver, thus fulfilling the function's
documented behavior for all rate objects.
[1]
repro steps:
echo 1 > /sys/bus/netdevsim/new_device
devlink dev eswitch set netdevsim/netdevsim1 mode switchdev
echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs
devlink port function rate add netdevsim/netdevsim1/test_node
devlink port function rate set netdevsim/netdevsim1/128 parent test_node
echo 1 > /sys/bus/netdevsim/del_device
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
__nsim_dev_port_del+0x6c/0x70 [netdevsim]
nsim_dev_reload_destroy+0x11c/0x140 [netdevsim]
nsim_drv_remove+0x2b/0xb0 [netdevsim]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x130
device_del+0x159/0x3c0
device_unregister+0x1a/0x60
del_device_store+0x111/0x170 [netdevsim]
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x55/0x10f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000
devlink port function rate add pci/0000:08:00.0/group1
devlink port function rate set pci/0000:08:00.0/32768 parent group1
modprobe -r mlx5_ib mlx5_fwctl mlx5_core
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core]
mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core]
mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core]
mlx5_sf_esw_event+0xc4/0x120 [mlx5_core]
notifier_call_chain+0x33/0xa0
blocking_notifier_call_chain+0x3b/0x50
mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core]
mlx5_eswitch_disable+0x63/0x90 [mlx5_core]
mlx5_unload+0x1d/0x170 [mlx5_core]
mlx5_uninit_one+0xa2/0x130 [mlx5_core]
remove_one+0x78/0xd0 [mlx5_core]
pci_device_remove+0x39/0xa0
device_release_driver_internal+0x194/0x1f0
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x53/0x1f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a NULL pointer dereference in ClonePixelCacheRepository allows a remote attacker to crash any application linked against ImageMagick by supplying a crafted image file, resulting in denial of service. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, in `ReadSFWImage()` (`coders/sfw.c`), when temporary file creation fails, `read_info` is destroyed before its `filename` member is accessed, causing a NULL pointer dereference and crash. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| free5GC SMF provides Session Management Function for free5GC, an open-source project for 5th generation (5G) mobile core networks. In versions up to and including 1.4.1, SMF panics and terminates when processing a malformed PFCP SessionReportRequest on the PFCP (UDP/8805) interface. No known upstream fix is available, but some workarounds are available. ACL/firewall the PFCP interface so only trusted UPF IPs can reach SMF (reduce spoofing/abuse surface); drop/inspect malformed PFCP SessionReportRequest messages at the network edge where feasible, and/or add recover() around PFCP handler dispatch to avoid whole-process termination (mitigation only). |
| free5GC SMF provides Session Management Function for free5GC, an open-source project for 5th generation (5G) mobile core networks. In versions up to and including 1.4.1, SMF panics and terminates when processing a malformed PFCP SessionReportRequest on the PFCP (UDP/8805) interface. No known upstream fix is available, but some workarounds are available. ACL/firewall the PFCP interface so only trusted UPF IPs can reach SMF (reduce spoofing/abuse surface); drop/inspect malformed PFCP SessionReportRequest messages at the network edge where feasible, and/or add recover() around PFCP handler dispatch to avoid whole-process termination (mitigation only). |
| free5GC SMF provides Session Management Function for free5GC, an open-source project for 5th generation (5G) mobile core networks. In versions up to and including 1.4.1, SMF panics due to nil pointer dereference and the SMF process terminates. This is triggered by a malformed PFCP SessionReportRequest on the SMF PFCP (UDP/8805) interface. No known upstream fix is available, but some workarounds are available. ACL/firewall the PFCP interface so only trusted UPF IPs can reach SMF (reduce spoofing/abuse surface); drop/inspect malformed PFCP SessionReportRequest messages at the network edge where feasible, and/or add recover() around PFCP handler dispatch to avoid whole-process termination (mitigation only). |
| A vulnerability has been found in libvips up to 8.18.0. The impacted element is the function vips_foreign_load_matrix_header of the file libvips/foreign/matrixload.c. The manipulation leads to null pointer dereference. The attack needs to be performed locally. The identifier of the patch is d4ce337c76bff1b278d7085c3c4f4725e3aa6ece. To fix this issue, it is recommended to deploy a patch. |
| A flaw was found in the QEMU built-in VNC server while processing ClientCutText messages. The qemu_clipboard_request() function can be reached before vnc_server_cut_text_caps() was called and had the chance to initialize the clipboard peer, leading to a NULL pointer dereference. This could allow a malicious authenticated VNC client to crash QEMU and trigger a denial of service. |
| A null pointer dereference vulnerability in the IP settings CGI program of the Zyxel VMG3625-T50B firmware versions through 5.50(ABPM.9.6)C0 and the Zyxel WX3100-T0 firmware versions through 5.50(ABVL.4.8)C0 could allow an authenticated attacker with administrator privileges to trigger a denial-of-service (DoS) condition by sending a crafted HTTP request. |
| A null pointer dereference vulnerability in the account settings CGI program of the Zyxel VMG3625-T50B firmware versions through 5.50(ABPM.9.6)C0 and the Zyxel WX3100-T0 firmware versions through 5.50(ABVL.4.8)C0 could allow an authenticated attacker with administrator privileges to trigger a denial-of-service (DoS) condition by sending a crafted HTTP request. |
| A null pointer dereference vulnerability in the certificate downloader CGI program of the Zyxel VMG3625-T50B firmware versions through 5.50(ABPM.9.6)C0 and the Zyxel WX3100-T0 firmware versions through 5.50(ABVL.4.8)C0 could allow an authenticated attacker with administrator privileges to trigger a denial-of-service (DoS) condition by sending a crafted HTTP request. |
| A null pointer dereference vulnerability in the Wake-on-LAN CGI program of the Zyxel VMG3625-T50B firmware version through 5.50(ABPM.9.6)C0 and the Zyxel WX3100-T0 firmware versions through 5.50(ABVL.4.8)C0 could allow an authenticated attacker with administrator privileges to trigger a denial-of-service (DoS) condition by sending a crafted HTTP request. |
| free5gc UDM provides Unified Data Management (UDM) for free5GC, an open-source project for 5th generation (5G) mobile core networks. Versions up to and including 1.4.1 have a NULL Pointer Dereference vulnerability. Remote unauthenticated attackers can trigger a service panic (Denial of Service) by sending a crafted PUT request with an unexpected ueId, crashing the UDM service. All deployments of free5GC using the UDM component may be affected. free5gc/udm pull request 76 contains a fix for the issue. No direct workaround is available at the application level. Applying the official patch is recommended. |
| libtiff up to v4.7.1 was discovered to contain a NULL pointer dereference via the component libtiff/tif_open.c. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix crash on profile change rollback failure
mlx5e_netdev_change_profile can fail to attach a new profile and can
fail to rollback to old profile, in such case, we could end up with a
dangling netdev with a fully reset netdev_priv. A retry to change
profile, e.g. another attempt to call mlx5e_netdev_change_profile via
switchdev mode change, will crash trying to access the now NULL
priv->mdev.
This fix allows mlx5e_netdev_change_profile() to handle previous
failures and an empty priv, by not assuming priv is valid.
Pass netdev and mdev to all flows requiring
mlx5e_netdev_change_profile() and avoid passing priv.
In mlx5e_netdev_change_profile() check if current priv is valid, and if
not, just attach the new profile without trying to access the old one.
This fixes the following oops, when enabling switchdev mode for the 2nd
time after first time failure:
## Enabling switchdev mode first time:
mlx5_core 0012:03:00.1: E-Switch: Supported tc chains and prios offload
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
^^^^^^^^
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
## retry: Enabling switchdev mode 2nd time:
mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload
BUG: kernel NULL pointer dereference, address: 0000000000000038
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 13 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc4+ #91 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:mlx5e_detach_netdev+0x3c/0x90
Code: 50 00 00 f0 80 4f 78 02 48 8b bf e8 07 00 00 48 85 ff 74 16 48 8b 73 78 48 d1 ee 83 e6 01 83 f6 01 40 0f b6 f6 e8 c4 42 00 00 <48> 8b 45 38 48 85 c0 74 08 48 89 df e8 cc 47 40 1e 48 8b bb f0 07
RSP: 0018:ffffc90000673890 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8881036a89c0 RCX: 0000000000000000
RDX: ffff888113f63800 RSI: ffffffff822fe720 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000002dcd R09: 0000000000000000
R10: ffffc900006738e8 R11: 00000000ffffffff R12: 0000000000000000
R13: 0000000000000000 R14: ffff8881036a89c0 R15: 0000000000000000
FS: 00007fdfb8384740(0000) GS:ffff88856a9d6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 0000000112ae0005 CR4: 0000000000370ef0
Call Trace:
<TASK>
mlx5e_netdev_change_profile+0x45/0xb0
mlx5e_vport_rep_load+0x27b/0x2d0
mlx5_esw_offloads_rep_load+0x72/0xf0
esw_offloads_enable+0x5d0/0x970
mlx5_eswitch_enable_locked+0x349/0x430
? is_mp_supported+0x57/0xb0
mlx5_devlink_eswitch_mode_set+0x26b/0x430
devlink_nl_eswitch_set_doit+0x6f/0xf0
genl_family_rcv_msg_doit+0xe8/0x140
genl_rcv_msg+0x18b/0x290
? __pfx_devlink_nl_pre_doit+0x10/0x10
? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10
? __pfx_devlink_nl_post_doit+0x10/0x10
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x52/0x100
genl_rcv+0x28/0x40
netlink_unicast+0x282/0x3e0
? __alloc_skb+0xd6/0x190
netlink_sendmsg+0x1f7/0x430
__sys_sendto+0x213/0x220
? __sys_recvmsg+0x6a/0xd0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fdfb8495047 |
| The bone voice ID TA has a vulnerability in calculating the buffer length,Successful exploitation of this vulnerability may affect data confidentiality. |
