| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenPGP.js is a JavaScript implementation of the OpenPGP protocol. Startinf in version 5.0.1 and prior to versions 5.11.3 and 6.1.1, a maliciously modified message can be passed to either `openpgp.verify` or `openpgp.decrypt`, causing these functions to return a valid signature verification result while returning data that was not actually signed. This flaw allows signature verifications of inline (non-detached) signed messages (using `openpgp.verify`) and signed-and-encrypted messages (using `openpgp.decrypt` with `verificationKeys`) to be spoofed, since both functions return extracted data that may not match the data that was originally signed. Detached signature verifications are not affected, as no signed data is returned in that case. In order to spoof a message, the attacker needs a single valid message signature (inline or detached) as well as the plaintext data that was legitimately signed, and can then construct an inline-signed message or signed-and-encrypted message with any data of the attacker's choice, which will appear as legitimately signed by affected versions of OpenPGP.js. In other words, any inline-signed message can be modified to return any other data (while still indicating that the signature was valid), and the same is true for signed+encrypted messages if the attacker can obtain a valid signature and encrypt a new message (of the attacker's choice) together with that signature. The issue has been patched in versions 5.11.3 and 6.1.1. Some workarounds are available. When verifying inline-signed messages, extract the message and signature(s) from the message returned by `openpgp.readMessage`, and verify the(/each) signature as a detached signature by passing the signature and a new message containing only the data (created using `openpgp.createMessage`) to `openpgp.verify`. When decrypting and verifying signed+encrypted messages, decrypt and verify the message in two steps, by first calling `openpgp.decrypt` without `verificationKeys`, and then passing the returned signature(s) and a new message containing the decrypted data (created using `openpgp.createMessage`) to `openpgp.verify`. |
| Formbricks is an open source qualtrics alternative. Prior to version 4.0.1, Formbricks is missing JWT signature verification. This vulnerability stems from a token validation routine that only decodes JWTs (jwt.decode) without verifying their signatures. Both the email verification token login path and the password reset server action use the same validator, which does not check the token’s signature, expiration, issuer, or audience. If an attacker learns the victim’s actual user.id, they can craft an arbitrary JWT with an alg: "none" header and use it to authenticate and reset the victim’s password. This issue has been patched in version 4.0.1. |
| Improper verification of the digital signature in ksojscore.dll in Kingsoft WPS Office in versions equal or less than 12.1.0.18276
on Windows allows an attacker to load an arbitrary Windows library. The patch released in version 12.2.0.16909 to mitigate CVE-2024-7262 was not restrictive enough. |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a validly-signed but "mismatched" bundle is presented as proof of inclusion into a transparency log. This bug impacts clients using any variation of KeylessVerifier.verify(). The verifier may accept a bundle with an unrelated log entry, cryptographically verifying everything but fails to ensure the log entry applies to the artifact in question, thereby "verifying" a bundle without any proof the signing event was logged. This allows the creation of a bundle without fulcio certificate and private key combined with an unrelated but time-correct log entry to fake logging of a signing event. A malicious actor using a compromised identity may want to do this to prevent discovery via rekor's log monitors. The signer's identity will still be available to the verifier. The signature on the bundle must still be on the correct artifact for the verifier to pass. sigstore-gradle-plugin and sigstore-maven-plugin are not affected by this as they only provide signing functionality. This issue has been patched in v1.1.0 release with PR #856. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| This vulnerability exists in the TP-Link Archer C50 due to improper signature verification mechanism in the firmware upgrade process at its web interface. An attacker with administrative privileges within the router’s Wi-Fi range could exploit this vulnerability by uploading and executing malicious firmware which could lead to complete compromise of the targeted device. |
| A potential vulnerability was reported in the Lenovo 510 FHD and Performance FHD web cameras that could allow an attacker with physical access to write arbitrary firmware updates to the device over a USB connection. |
| In the CryptX module before 0.062 for Perl, gcm_decrypt_verify() and chacha20poly1305_decrypt_verify() do not verify the tag. |
| Under certain circumstances, BIND is too lenient when accepting records from answers, allowing an attacker to inject forged data into the cache.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW-F . An attacker can update the system firmware with a specially crafted image. |
| A vulnerability has been identified in Mendix SAML (Mendix 10.12 compatible) (All versions < V4.0.3), Mendix SAML (Mendix 10.21 compatible) (All versions < V4.1.2), Mendix SAML (Mendix 9.24 compatible) (All versions < V3.6.21). Affected versions of the module insufficiently enforce signature validation and binding checks. This could allow unauthenticated remote attackers to hijack an account in specific SSO configurations. |
| ALTCHA is privacy-first software for captcha and bot protection. A cryptographic semantic binding flaw in ALTCHA libraries allows challenge payload splicing, which may enable replay attacks. The HMAC signature does not unambiguously bind challenge parameters to the nonce, allowing an attacker to reinterpret a valid proof-of-work submission with a modified expiration value. This may allow previously solved challenges to be reused beyond their intended lifetime, depending on server-side replay handling and deployment assumptions. The vulnerability primarily impacts abuse-prevention mechanisms such as rate limiting and bot mitigation. It does not directly affect data confidentiality or integrity. This issue has been addressed by enforcing explicit semantic separation between challenge parameters and the nonce during HMAC computation. Users are advised to upgrade to patched versions, which include version 1.0.0 of the altcha Golang package, version 1.0.0 of the altcha Rubygem, version 1.0.0 of the altcha pip package, version 1.0.0 of the altcha Erlang package, version 1.4.1 of the altcha-lib npm package, version 1.3.1 of the altcha-org/altcha Composer package, and version 1.3.0 of the org.altcha:altcha Maven package. As a mitigation, implementations may append a delimiter to the end of the `salt` value prior to HMAC computation (for example, `<salt>?expires=<time>&`). This prevents ambiguity between parameters and the nonce and is backward-compatible with existing implementations, as the delimiter is treated as a standard URL parameter separator. |
| Improper authentication in the API authentication middleware of HCL DevOps Loop allows authentication tokens to be accepted without proper validation of their expiration and cryptographic signature. As a result, an attacker could potentially use expired or tampered tokens to gain unauthorized access to sensitive resources and perform actions with elevated privileges. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image. |
| Improper signature verification in AMD CPU ROM microcode patch loader may allow an attacker with local administrator privilege to load malicious microcode, potentially resulting in loss of integrity of x86 instruction execution, loss of confidentiality and integrity of data in x86 CPU privileged context and compromise of SMM execution environment. |
| A SAML library not dependent on any frameworks that runs in Node. In version 5.0.1, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. To conduct the attack an attacker would need a validly signed document from the identity provider (IdP). This is fixed in version 5.1.0. |
| A vulnerability in the Image Signature Verification feature of Cisco SD-WAN Software could allow an authenticated, remote attacker with Administrator-level credentials to install a malicious software patch on an affected device.
The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.Cisco has released software updates that address the vulnerability described in this advisory. There are no workarounds that address this vulnerability. |
| Improper verification of cryptographic signature issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. The affected app cannot detect event data with invalid signatures. |
| The firmware upgrade function in the admin web interface of the Rittal IoT Interface & CMC III Processing Unit devices checks if
the patch files are signed before executing the containing run.sh
script. The signing process is kind of an HMAC with a long string as key
which is hard-coded in the firmware and is freely available for
download. This allows crafting malicious "signed" .patch files in order
to compromise the device and execute arbitrary code. |
| Node-SAML is a SAML library not dependent on any frameworks that runs in Node. In versions 5.0.1 and below, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. This issue is fixed in version 5.1.0. |
| A flaw exists in the SAML signature validation method within the Keycloak XMLSignatureUtil class. The method incorrectly determines whether a SAML signature is for the full document or only for specific assertions based on the position of the signature in the XML document, rather than the Reference element used to specify the signed element. This flaw allows attackers to create crafted responses that can bypass the validation, potentially leading to privilege escalation or impersonation attacks. |
