| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: avoid invalid read in irdma_net_event
irdma_net_event() should not dereference anything from "neigh" (alias
"ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE.
Other events come with different structures pointed to by "ptr" and they
may be smaller than struct neighbour.
Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case.
The bug is mostly harmless, but it triggers KASAN on debug kernels:
BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma]
Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554
CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1
Hardware name: [...]
Workqueue: events rt6_probe_deferred
Call Trace:
<IRQ>
dump_stack_lvl+0x60/0xb0
print_address_description.constprop.0+0x2c/0x3f0
print_report+0xb4/0x270
kasan_report+0x92/0xc0
irdma_net_event+0x32e/0x3b0 [irdma]
notifier_call_chain+0x9e/0x180
atomic_notifier_call_chain+0x5c/0x110
rt6_do_redirect+0xb91/0x1080
tcp_v6_err+0xe9b/0x13e0
icmpv6_notify+0x2b2/0x630
ndisc_redirect_rcv+0x328/0x530
icmpv6_rcv+0xc16/0x1360
ip6_protocol_deliver_rcu+0xb84/0x12e0
ip6_input_finish+0x117/0x240
ip6_input+0xc4/0x370
ipv6_rcv+0x420/0x7d0
__netif_receive_skb_one_core+0x118/0x1b0
process_backlog+0xd1/0x5d0
__napi_poll.constprop.0+0xa3/0x440
net_rx_action+0x78a/0xba0
handle_softirqs+0x2d4/0x9c0
do_softirq+0xad/0xe0
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| In the Linux kernel, the following vulnerability has been resolved:
efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare
Observed on kernel 6.6 (present on master as well):
BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0
Call trace:
kasan_check_range+0xe8/0x190
__asan_loadN+0x1c/0x28
memcmp+0x98/0xd0
efivarfs_d_compare+0x68/0xd8
__d_lookup_rcu_op_compare+0x178/0x218
__d_lookup_rcu+0x1f8/0x228
d_alloc_parallel+0x150/0x648
lookup_open.isra.0+0x5f0/0x8d0
open_last_lookups+0x264/0x828
path_openat+0x130/0x3f8
do_filp_open+0x114/0x248
do_sys_openat2+0x340/0x3c0
__arm64_sys_openat+0x120/0x1a0
If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become
negative, leadings to oob. The issue can be triggered by parallel
lookups using invalid filename:
T1 T2
lookup_open
->lookup
simple_lookup
d_add
// invalid dentry is added to hash list
lookup_open
d_alloc_parallel
__d_lookup_rcu
__d_lookup_rcu_op_compare
hlist_bl_for_each_entry_rcu
// invalid dentry can be retrieved
->d_compare
efivarfs_d_compare
// oob
Fix it by checking 'guid' before cmp. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-25, a crafted multi-frame can result in a heap buffer over-write when encoding it with the SF3 encoder. This issue has been patched in version 7.1.2-25. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-24, when using an image with mask the Floyd-Steinberg dithering method it will cause a negative heap buffer over-write. This issue has been patched in version 7.1.2-24. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-23, an attacker who can connect to a magick -distribute-cache service can cause a heap buffer over-read in the server process. This issue has been patched in versions 6.9.13-48 and 7.1.2-23. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-23, an attacker who can connect to a magick -distribute-cache service can cause a heap buffer over-write in the server process. This issue has been patched in versions 6.9.13-48 and 7.1.2-23. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-23, an incorrect check in the JP2 will result in an heap buffer over-write of a single byte when specifying certain options. This issue has been patched in versions 6.9.13-48 and 7.1.2-23. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-23, when using LZMA compression in the MIFF encoder an out of bounds write can occur due to a missing check. This issue has been patched in versions 6.9.13-48 and 7.1.2-23. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-23, when reading multiple images with different dimensions an out of bounds heap write can occur. This issue has been patched in versions 6.9.13-48 and 7.1.2-23. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, when performing a polynomial distortion an out of bounds over-read of 24 bytes can occur when specifying specific arguments. This issue has been patched in versions 6.9.13-47 and 7.1.2-22. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-22, an invalid connected-components:keep-top value could result in a heap buffer over-read when performing the connected components operation. This issue has been patched in versions 6.9.13-48 and 7.1.2-22. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, an off by one in the meta encoder could result in an out of bounds read of a single byte in the meta encoder. This issue has been patched in versions 6.9.13-47 and 7.1.2-22. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, when writing an IPTC output file a malicious input file could cause an out of bounds read of a single byte. This issue has been patched in versions 6.9.13-47 and 7.1.2-22. |
| Out-of-bounds read in Windows Application Identity (AppID) Subsystem allows an authorized attacker to disclose information locally. |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to disclose information locally. |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. |
| Out-of-bounds read in Microsoft UxTheme Library (uxtheme.dll) allows an authorized attacker to deny service locally. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. |
