| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: reject zero-length fixed buffer import
validate_fixed_range() admits buf_addr at the exact end of the
registered region when len is zero, because the check uses strict
greater-than (buf_end > imu->ubuf + imu->len). io_import_fixed()
then computes offset == imu->len, which causes the bvec skip logic
to advance past the last bio_vec entry and read bv_offset from
out-of-bounds slab memory.
Return early from io_import_fixed() when len is zero. A zero-length
import has no data to transfer and should not walk the bvec array
at all.
BUG: KASAN: slab-out-of-bounds in io_import_reg_buf+0x697/0x7f0
Read of size 4 at addr ffff888002bcc254 by task poc/103
Call Trace:
io_import_reg_buf+0x697/0x7f0
io_write_fixed+0xd9/0x250
__io_issue_sqe+0xad/0x710
io_issue_sqe+0x7d/0x1100
io_submit_sqes+0x86a/0x23c0
__do_sys_io_uring_enter+0xa98/0x1590
Allocated by task 103:
The buggy address is located 12 bytes to the right of
allocated 584-byte region [ffff888002bcc000, ffff888002bcc248) |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Fix potential bad container_of in intel_pmu_hw_config
Auto counter reload may have a group of events with software events
present within it. The software event PMU isn't the x86_hybrid_pmu and
a container_of operation in intel_pmu_set_acr_caused_constr (via the
hybrid helper) could cause out of bound memory reads. Avoid this by
guarding the call to intel_pmu_set_acr_caused_constr with an
is_x86_event check. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation
The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.
This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.
Widen valuesize from u8 to u32 to accommodate the full range. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pxp: Clear restart flag in pxp_start after jumping back
If we don't clear the flag we'll keep jumping back at the beginning of
the function once we reach the end.
(cherry picked from commit 0850ec7bb2459602351639dccf7a68a03c9d1ee0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ioc32: stop speculation on the drm_compat_ioctl path
The drm compat ioctl path takes a user controlled pointer, and then
dereferences it into a table of function pointers, the signature method
of spectre problems. Fix this up by calling array_index_nospec() on the
index to the function pointer list. |
| Insufficient verification of data authenticity in PackageManagerService prior to SMR Mar-2026 Release 1 allows local attackers to modify the installation restriction of specific application. |
| TOTOLINK N200RE V5 was discovered to contain a command injection vulnerability via the macstr and bandstr parameters in the formMapDelDevice function. |
| An issue in Krayin CRM v.2.1.5 and fixed in v.2.1.6 allows a remote attacker to execute arbitrary code via the compose email function |
| A heap-based buffer overflow in the Kerberos hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted Kerberos hash file. The issue affects module_hash_decode in multiple Kerberos-related modules because account_info_len is calculated from untrusted delimiter positions without upper-bound validation before memcpy copies the data into a fixed-size account_info buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic: spifc-a4: unregister ECC engine on probe failure and remove() callback
aml_sfc_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal. |
| Cross Site Scripting vulnerability in andrewtch88 mvc-ecommerce v.1.0 allows a remote attacker to execute arbitrary code and obtain sensitive information via the product_catalogue.php component |
| Cross Site Scripting vulnerability in RafyMrX TOKO-ONLINE-ROTI v.1.0 allows a remote attacker to execute arbitrary code via the detail_produk.php component |
| A Server-Side Request Forgery (SSRF) in the /themes/-/install-from-uri endpoint of halo v2.22.14 allows authenticated attackers to scan internal resources via a crafted GET request. |
| A stored cross-site scripting (XSS) vulnerability in the /api/blade-desk/notice/submit endpoint of SpringBlade v4.8.0 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted input into the content parameter. |
| Pallets Click, versions 8.3.2 and below, contain a command injection vulnerability in the click.edit() function, allowing attackers to pass arbitrary OS commands from an unprivileged account. |
| A heap-based buffer overflow in hex_to_binary in the PKZIP hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted PKZIP hash file. The issue affects modules 17200, 17210, 17220, 17225, and 17230. When data_type_enum<=1, attacker-controlled hex data from a user-supplied hash string is decoded into a fixed-size buffer without proper input-length validation. |
| Sensitive server_token exposed via GET parameter in V2Board thru 1.7.4. In app/Http/Controllers/Server/UniProxyController.php, the server authentication token is accepted via GET parameter transmission. The token appears in URLs such as /api/v1/server/UniProxy/user?token=SECRET, causing it to be recorded in web server access logs, browser history, HTTP Referer headers, and proxy/CDN logs. An attacker who gains access to any log source can extract the token and impersonate a proxy server node, potentially intercepting all user traffic. |
