| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| fastify versions before 5.12.2 implement the case-insensitive nature of HTTP header names by lowercasing names in a route's header schema before compiling it, but the transformation is incomplete: it lowercases the properties keys and the root-level required array, and does not lowercase the trigger and dependent names inside the JSON Schema Draft 7 dependencies keyword. Because Node stores request header names in lowercase, a canonical-case dependency such as requiring an authentication header whenever a privileged-mode header is present never matches, and the presence assertion is silently skipped. An unauthenticated remote client can therefore send the header that activates a privileged branch while omitting the header the dependency was meant to require, bypassing the conditional check. Users should upgrade to fastify 5.12.2 or later. |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.1, and 12.0.1.0 through 12.0.12.28 and IBM Integration Bus for z/OS 10.1.0.0 through 10.1.0.7 SAP Adapter is vulnerable to an XML external entity (XXE) attack. |
| IBM Langflow OSS 1.0.0 through 1.11.2 could allow a remote attacker to obtain sensitive information due to server-side request forgery. |
| fast-uri accepts a host that contains an unbalanced or misplaced authority bracket without reporting an error. A host that starts with an opening bracket but does not end with a closing bracket is neither validated as an IP literal nor canonicalized as a domain name, so parse() returns it as the host with error undefined, while Node's URL and the HTTP clients built on it resolve the same string to a different host. An application that reads the parsed host to make a host decision, such as an SSRF denylist, a redirect allowlist, or proxy routing, and then passes the original URL to an HTTP client evaluates its policy against a string that is not the host the request reaches. The same host is carried through normalize, equal, and resolve. This affects fast-uri versions 2.4.5, 3.1.6, and 4.1.3, and is fixed in 2.4.6, 3.1.7, and 4.1.4, where parse() reports a malformed host for any host that contains a bracket but is not a valid IPv6 literal. |
| IBM Langflow OSS 1.0.0 through 1.11.2 could allow a remote authenticated attacker to execute arbitrary code due to an authorization bypass in the flow build process. |
| IBM Langflow OSS 1.0.0 through 1.11.2 could allow a remote authenticated attacker to delete arbitrary local files or directories due to improper limitation of a pathname to a restricted directory. |
| Trigger.dev versions before 4.5.2 fail to validate environment membership during run replay operations, allowing authenticated attackers to inject task runs into arbitrary environments. Attackers can replay their own runs into other organizations' or projects' environments to consume victim resources and pollute run history. |
| Chroma 1.5.9 fails to validate maximum bounds on HNSW index parameters max_neighbors, ef_construction, and ef_search in collection-create requests. Unauthenticated attackers can supply arbitrarily large parameter values to exhaust server memory and cause denial of service during index compaction. |
| jina-ai reader contains a server-side request forgery vulnerability where URL validation is performed only on the initial request but not re-applied to subsequent redirect hops. Attackers can craft a public URL that redirects to internal network addresses or cloud metadata endpoints, allowing the server to fetch and return the target's response body to the attacker. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length
check_and_correct_requested_length() compares (off + len) against
node_size using u32 arithmetic. When the caller passes a large len
value (e.g. from an underflowed subtraction in hfs_brec_remove()),
off + len can wrap past 2^32 and produce a small result, causing the
bounds check to pass when it should fail.
For example, with off=14 and len=0xFFFFFFF2 (underflowed from
data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6,
which is less than a typical node_size of 512, so the check passes and
the subsequent memmove reads ~4GB past the node buffer.
Fix this by widening the addition to u64 before comparing against
node_size. This prevents the u32 wrap while keeping the logic
straightforward. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: lg-g15: cancel pending work on remove to fix a use-after-free
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.
The driver had no remove callback and never cancelled the work. So if a
report scheduled the work and the keyboard was then unplugged, devres
freed lg_g15_data while the work was still pending or running, and the
worker touched freed memory. This is a use-after-free. It is reachable
as a race on device unplug.
Add a remove callback that cancels the work before devres frees the
state. g15->work is only initialized for the models that schedule it
(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the
cancel on g15->work.func to avoid cancelling a work that was never set
up. The g15 NULL test mirrors the one already in lg_g15_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appleir: fix UAF on pending key_up_timer in remove()
appleir_remove() runs hid_hw_stop() before timer_delete_sync().
hid_hw_stop() synchronously unregisters the HID input device via
hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),
which drops the last reference and frees the underlying input_dev when
no userspace handle holds it open.
key_up_tick() reads appleir->input_dev and calls input_report_key() /
input_sync() on it. The timer is armed from appleir_raw_event() with
a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a
key was pressed shortly before the device is disconnected, the timer
can fire after hid_hw_stop() has freed input_dev but before the
teardown drains it.
A simple reorder is not sufficient. Putting the timer drain first
still leaves a window where a USB URB completion (raw_event) running
during hid_hw_stop() can call mod_timer() and re-arm the timer, which
then fires after hidinput_disconnect() has freed input_dev. The same
URB-completion window also lets raw_event() reach key_up(), key_down()
and battery_flat() directly, all of which dereference
appleir->input_dev.
Introduce a 'removing' flag on struct appleir, gated by the existing
spinlock. appleir_remove() sets the flag under the lock and then
shuts down the timer with timer_shutdown_sync(), which both drains any
in-flight callback and permanently disables further mod_timer() calls.
appleir_raw_event() and key_up_tick() bail out early if the flag is
set, so no path can arm or run the timer, or dereference
appleir->input_dev, after remove() has started tearing down.
The keyrepeat and flatbattery branches of appleir_raw_event()
previously called into the input layer without holding the spinlock;
take it now so the flag check is well-defined. This incidentally
closes a pre-existing read-side race on appleir->current_key in the
keyrepeat branch.
This bug is structurally a sibling of commit 4db2af929279 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been
present since the driver was introduced. |
| ** UNSUPPORTED WHEN ASSIGNED ** Uncontrolled Recursion vulnerability in Apache Lucy.
This issue affects Apache Lucy: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the ASF. Lucy is now maintained outside of the ASF at https://github.com/lucysearch |
| In the Linux kernel, the following vulnerability has been resolved:
netpoll: fix a use-after-free on shutdown path
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_thread+0x414/0x5a0
Allocated by task 242:
__netpoll_setup+0x201/0x4a0
netpoll_setup+0x249/0x550
enabled_store+0x32f/0x380
Freed by task 0:
kfree+0x1b7/0x540
rcu_core+0x3f8/0x7a0
The problem happens when there is a pending TX worker running in
parallel with the cleanup path.
This is what happens on netpoll shutdown path:
1) __netpoll_cleanup() is called
2) set dev->npinfo to NULL
3) call_rcu() with rcu_cleanup_netpoll_info()
3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with
cancel_delayed_work(), but doesn't wait for the worker to finish
4) and kfree(npinfo);
Because 3.1) doesn't really cancel the work, as the comment says "we
can't call cancel_delayed_work_sync here, as we are in softirq", the TX
worker can run after 4).
Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through
the work item via container_of().
Use disable_delayed_work_sync() to ensure the worker is completely
stopped and prevent any future re-arming attempts. Once npinfo is set
to NULL, senders will bail out and not queue new work. The disable flag
ensures any in-flight re-arming attempts also fail silently.
In the future, we can do the cleanup inline here without needing the
npinfo->rcu rcu_head, but that is net-next material. |
| goose 1.37.0 executes arbitrary commands from recipe stdio extensions and retry.checks without security inspection. Attackers can distribute malicious recipes that execute shell commands as the user running goose, bypassing the recipe security scan which does not inspect extensions or retry configurations. |
| MegaParse 0.0.55 contains an unauthenticated server-side request forgery vulnerability in the POST /v1/url endpoint that fetches caller-supplied URLs server-side. Attackers can supply internal service URLs or metadata endpoints without authentication to read their responses directly from the JSON response. |
| IBM Observability with Instana (Agent) Build 1.0.303 through 1.0.323 IBM Instana Agent Operator could allow an authenticated remote attacker to obtain sensitive information, caused by missing destination namespace validation when copying etcd mTLS client credentials from the openshift-etcd system namespace into an attacker-controlled namespace. |
| aider (aider-chat) automatically loads a .aider.conf.yml configuration file from the root of the git repository it is launched in. A crafted repository can set test-cmd (executed at startup) or lint-cmd (executed on the first file edit), which aider runs through a shell (subprocess with shell=True) without any user confirmation, LLM interaction, or API key. Consequently, a user who clones and runs aider inside an attacker-supplied repository achieves arbitrary command execution on their machine. The behavior is long-standing and was confirmed on 0.86.3.dev (current main). |
| ms-swift 4.5.2 contains a server-side request forgery vulnerability in the swift deploy OpenAI-compatible API that fetches multimodal media URLs without validation or redirect filtering. Unauthenticated attackers can supply arbitrary image_url, audio_url, or video_url parameters to make the server issue requests to internal services and cloud metadata endpoints. |
| Helicone's VaultManager.getDecryptedProviderKeyById() function in the GET /v1/vault/key/{providerKeyId} endpoint fails to validate the requester's organization against the vault key's organization identifier. Attackers with admin or owner privileges in any organization can retrieve decrypted upstream provider credentials for other tenants, including plaintext OpenAI, Anthropic, and Bedrock API keys. |
