Export limit exceeded: 26457 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23100 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64435 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: audit: Fix data races of skb_queue_len() readers on audit_queue Multiple readers access audit_queue.qlen via skb_queue_len() without holding the queue lock or using READ_ONCE(), while kauditd writes to this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE() protected by a spinlock. This constitutes data races. All affected skb_queue_len(&audit_queue) call sites: - kauditd_thread() wait_event_freezable() condition - audit_receive_msg() AUDIT_GET handler (s.backlog assignment) - audit_receive() backlog check - audit_log_start() backlog check and pr_warn() KCSAN reports the following conflicting access pattern (one example): ================================================================== BUG: KCSAN: data-race in audit_log_start / skb_dequeue write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57: skb_dequeue+0x70/0xf0 kauditd_send_queue+0x71/0x220 kauditd_thread+0x1cb/0x430 kthread+0x1c2/0x210 ret_from_fork+0x162/0x1a0 ret_from_fork_asm+0x1a/0x30 read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1: audit_log_start+0x2a0/0x6b0 audit_core_dumps+0x64/0xa0 do_coredump+0x14b/0x1260 get_signal+0xeb2/0xf70 arch_do_signal_or_restart+0x41/0x170 exit_to_user_mode_loop+0xa2/0x1c0 do_syscall_64+0x1a3/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0xe0 value changed: 0x00000001 -> 0x00000000 ================================================================== Resolve the race by switching to lockless helper skb_queue_len_lockless(), which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE() write accesses already present on the writer side. [PM: line length tweak] | ||||
| CVE-2026-64437 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL") made smb2_cancel() skip a work whose state is KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same freeing producer path is reached for CLOSED too: SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock() worker. The worker takes the non-ACTIVE early-exit, locks_free_lock()s the file_lock and, because the state is not KSMBD_WORK_CANCELLED, takes the STATUS_RANGE_NOT_LOCKED branch with "goto out2" -- which, like the cancelled branch, skips release_async_work(). The work stays on conn->async_requests with a live cancel_fn = smb2_remove_blocked_lock pointing at the freed file_lock. A subsequent SMB2_CANCEL for the same AsyncId then passes the KSMBD_WORK_CANCELLED-only guard (its state is KSMBD_WORK_CLOSED), so smb2_cancel() fires cancel_fn again over the freed file_lock -- the same use-after-free fixed, via SMB2_CLOSE instead of a first SMB2_CANCEL: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (non-ACTIVE early-exit) ... cache file_lock_cache of size 192 Reproduced on mainline 7.1-rc7 (which already contains f580d27e8928) with KASAN by an authenticated SMB client; the double-SMB2_CANCEL control is silent on that kernel, so the splat is attributable to the CLOSE trigger. Only an ACTIVE deferred work may have its cancel_fn fired: both terminal states (CANCELLED and CLOSED) reach the smb2_lock() early-exit that frees the file_lock and skips release_async_work(). Guard on KSMBD_WORK_ACTIVE so any non-active work is skipped. | ||||
| CVE-2026-64335 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port. | ||||
| CVE-2026-64438 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix VF2PF work teardown race in adf_disable_sriov() The VF2PF interrupt handler queues PF-side response work that stores a raw pointer to per-VF state (struct adf_accel_vf_info). Currently, adf_disable_sriov() destroys per-VF mutexes and frees vf_info without stopping new VF2PF work or waiting for in-flight workers to complete. A concurrently scheduled or already queued worker can then dereference freed memory. This manifests as a use-after-free when KASAN is enabled: BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0 Write of size 8 at addr 0000000000000260 by task kworker/24:2/... Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat] Call Trace: kasan_report+0x119/0x140 mutex_lock+0x76/0xe0 adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat] adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat] adf_iov_send_resp+0x8c/0xe0 [intel_qat] process_one_work+0x6ac/0xfd0 worker_thread+0x4dd/0xd30 kthread+0x326/0x410 ret_from_fork+0x33b/0x670 Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker processing, and interrupt re-enabling during teardown. Set this flag atomically with the hardware interrupt mask inside adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE cluster MSI-X interrupt and flush the PF response workqueue before tearing down per-VF locks and state so all in-flight work completes before vf_info is destroyed. Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and unmask all VF2PF interrupts under the same lock when SR-IOV is re-enabled. This ensures the software flag and hardware state transition atomically on both the enable and disable paths. | ||||
| CVE-2026-64439 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: crypto: krb5 - filter out async aead implementations at alloc krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL completion callback and treat any negative return from crypto_aead_{encrypt,decrypt}() as terminal, falling through to kfree_sensitive(buffer). When the encrypt_name resolves to an async AEAD instance the request returns -EINPROGRESS, the buffer is freed while the backend's worker still holds a pointer, and the worker dereferences the freed slab on completion. KASAN report under UML+SLUB with a synthetic async aead backend bound to krb5->encrypt_name: BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7 The helpers were written synchronously, so filter the async instances out at allocation time instead of plumbing crypto_wait_req() through every call site. Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and net/ceph/crypto.c on systems with an async AEAD provider bound to the krb5 enctype name. | ||||
| CVE-2026-64440 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB write in HT_caps_handler() HT_caps_handler() iterates pIE->length bytes and writes into HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct HT_caps_element). Because pIE->length is a raw u8 from an over-the-air 802.11 AssocResponse frame and is never validated, a malicious AP can set it up to 255, causing up to 229 bytes of out-of-bounds writes into adjacent fields of struct mlme_ext_info. Truncate the iteration count to the size of HT_caps.u.HT_cap using umin() so that data from a longer-than-expected IE is silently ignored rather than written out of bounds, preserving interoperability with APs that pad the element. An early return on oversized IEs was considered but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1 assignment that precedes the loop, silently disabling HT mode for APs that append extra bytes to the HT Capabilities IE. | ||||
| CVE-2026-64441 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr() Three IE/attribute parsing functions have missing bounds checks. rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer without verifying that the header bytes (tag + length) are within the remaining buffer before reading them. Additionally, rtw_get_sec_ie() compares the 4-byte WPA OUI at cnt+2 without checking that at least 6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at cnt+6 without checking that at least 10 bytes remain. rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at entry, before verifying that wps_ielen is large enough to contain the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside the attribute loop, get_unaligned_be16() is called on attr_ptr and attr_ptr+2 without checking that 4 bytes remain in the buffer. Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie() and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum IE length requirement, add a wps_ielen < 6 early return in rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop. | ||||
| CVE-2026-64442 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl() Two IE parsing loops are missing the header bounds checks before they dereference pIE->length: - issue_assocreq() walks pmlmeinfo->network.ies to build the association request. If the stored IE data ends with only an element_id byte and no length byte, pIE->length is read one byte past the end of the buffer. - join_cmd_hdl() walks pnetwork->ies during station join and has the same problem under the same conditions. Both buffers are filled from AP beacon and probe-response frames, so a malicious AP that sends a truncated final IE can trigger the issue. Apply the two-guard pattern established in update_beacon_info(): 1. Break if fewer than sizeof(*pIE) bytes remain. 2. Break if the IE's declared data extends past the buffer end. | ||||
| CVE-2026-64443 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop The IE parsing loop in update_beacon_info() advances by (pIE->length + 2) each iteration but only guards on i < len. When a malicious AP sends a Beacon whose last IE has only one byte remaining in the frame (the element_id byte lands at len-1), the loop reads pIE->length from one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond len, passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past len. Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->length for consistency with the sizeof(*pIE) guards added above. | ||||
| CVE-2026-65083 | 2 Linux, Nvidia | 2 Linux Kernel, Openshell | 2026-09-03 | 9.9 Critical |
| NVIDIA OpenShell for Linux contains a vulnerability in its sandbox provisioning API, where an attacker could cause an incomplete list of disallowed inputs. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, data tampering, and denial of service. | ||||
| CVE-2026-65085 | 2 Linux, Nvidia | 2 Linux Kernel, Openshell | 2026-09-03 | 5.2 Medium |
| NVIDIA OpenShell for Linux contains a vulnerability in its inference proxy, where an attacker could cause an improper encoding or escaping of output. A successful exploit of this vulnerability might lead to information disclosure and data tampering. | ||||
| CVE-2026-65086 | 2 Linux, Nvidia | 2 Linux Kernel, Openshell | 2026-09-03 | 6.8 Medium |
| NVIDIA OpenShell for Linux contains a vulnerability in its sandbox exec handler, where an attacker could cause an OS command injection. A successful exploit of this vulnerability might lead to code execution, information disclosure, and data tampering. | ||||
| CVE-2026-78409 | 2 Linux, Redhat | 6 Util-linux, Enterprise Linux, Hardened Images and 3 more | 2026-09-03 | 7 High |
| The X-mount.subdir option uses a detached-tree fast path on Linux 6.15 and later and passes the configured subdirectory to open_tree() with AT_SYMLINK_NOFOLLOW. That flag does not stop intermediate symlink traversal or keep resolution inside the newly mounted filesystem. A local unprivileged user with an fstab-authorized X-mount.subdir entry can attach a host path at the intended mountpoint. | ||||
| CVE-2026-80530 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN When exchanging two full-file ranges, xmi_can_exchange_reflink_flags() can move the reflink inode flag from the file that currently has it to the other file, as long as exactly one side is marked. This assumes that the file contents, and therefore all shared extents, are exchanged. That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set. xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings from file1, so an exchange can complete without moving every mapping that the earlier flag-swap decision accounted for. In that case the post-operation cleanup can clear the reflink flag from an inode that still owns shared written extents. Later writes then take the non-reflink write path and may update blocks that should still have been protected by CoW, which shows up as data corruption between reflink-related files. Fix this by disabling the reflink flag exchange whenever XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still proceed; the conservative outcome is that both inodes keep the reflink flag. The regular reflink flag cleanup path can drop the extra flag later once the inode no longer has shared extents. | ||||
| CVE-2026-64086 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) include PEC byte in pmbus_block_xfer read buffer adm1266_pmbus_block_xfer() sets up the read transaction with .buf = data->read_buf, .len = ADM1266_PMBUS_BLOCK_MAX + 2, but read_buf in struct adm1266_data is declared as u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1]; For a max-length block response (length byte = 255 + up to 1 PEC byte), the i2c controller is told to write 257 bytes into a 256-byte buffer, putting one byte past the end of read_buf. The same response also makes the subsequent PEC compare if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) read a byte beyond the array. Bump the read_buf declaration to ADM1266_PMBUS_BLOCK_MAX + 2 so the buffer can hold the length byte, up to 255 payload bytes, and the PEC byte the i2c_msg length already accounts for. | ||||
| CVE-2026-64087 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) reject implausible blackbox record_count adm1266_nvmem_read_blackbox() loops over a record_count that comes straight from byte 3 of the BLACKBOX_INFO response. The destination buffer is data->dev_mem, sized for the nvmem cell's declared 2048 bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64). A device that reports a record_count greater than 32 -- whether due to firmware bugs, bus corruption, or a non-responsive slave returning 0xff -- would walk read_buff past the end of the dev_mem allocation on the trailing iterations. Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here) before entering the loop and return -EIO on any larger value, so a malformed BLACKBOX_INFO response cannot drive the loop out of bounds. | ||||
| CVE-2026-64299 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Prevent out-of-bounds read in glob matching String event fields are not necessarily NUL-terminated, so the filter predicate functions (filter_pred_string(), filter_pred_strloc() and filter_pred_strrelloc()) pass the field length to the regex match callbacks, and the length-aware matchers honour it. regex_match_glob() was the exception: it ignored the length and called glob_match(), which scans the string until it hits a NUL byte. Some string fields are not NUL-terminated. One example is the dynamic char array of the xfs_* namespace tracepoints, which is copied without a trailing NUL. For such a field, glob matching reads past the end of the event field, causing a KASAN slab-out-of-bounds read in glob_match(), reached via regex_match_glob() and filter_match_preds() from the xfs_lookup tracepoint. Add a length-bounded glob_match_len() and use it from regex_match_glob() so glob matching always stops at the field boundary. The matching loop is factored into a shared helper so glob_match() keeps its behaviour. | ||||
| CVE-2026-64300 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/aux: Fix page UAF in map_range() map_range() reads rb->aux_pages[], rb->aux_nr_pages and rb->aux_pgoff via perf_mmap_to_page() while holding only event->mmap_mutex. Those fields are serialized by rb->aux_mutex, and mmap_mutex is per event. Thus, two events sharing one rb via PERF_EVENT_IOC_SET_OUTPUT can race rb_alloc_aux() with map_range(), leading to a page-UAF scenario as follows: CPU 0 CPU 1 ===== ===== rb_alloc_aux() map_range() [1]: allocate rb->aux_pages[0] [2]: rb->aux_nr_pages++ [3]: perf_mmap_to_page() returns rb->aux_pages[0] [4]: map it as VM_PFNMAP [5]: rb->aux_pgoff = 1 munmap the page [6]: free rb->aux_pages[0] Pages mapped as VM_PFNMAP have no refcount protection, so CPU 1 holds a mapping to a freed physical frame. Fix this by taking rb->aux_mutex across the page walk in map_range(). | ||||
| CVE-2026-64301 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: scmi: fix of_node refcount leak in scmi_regulator_probe() scmi_regulator_probe() calls of_find_node_by_name() which takes a reference on the returned device node. On the error path where process_scmi_regulator_of_node() fails, the function returns without calling of_node_put() on the child node, leaking the reference. Add of_node_put(np) on the error path to properly release the reference. | ||||
| CVE-2026-64302 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix freeing of PMD-sized vmemmap pages Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from freeing non-boot page tables through __free_pages() to pagetable_free(). However, the function is also called to free vmemmap pages. Given that vmemmap pages are not page tables, already the page_ptdesc(page) is wrong. But worse, pagetable_free() calls: __free_pages(page, compound_order(page)); Since vmemmap pages are not compound pages (see vmemmap_alloc_block()) -- except for HVO, which doesn't apply here -- only first page of a PMD-sized vmemmap page is freed, leaking the other ones. Fix it by properly decoupling pagetable and vmemmap freeing. free_pagetable() no longer has to mess with SECTION_INFO, as only the vmemmap is marked like that in register_page_bootmem_memmap(). The indentation in remove_pmd_table() is messed up. Fix that while touching it. Bootmem info handling will soon be fixed up. For now, handle it similar to free_pagetable(), just avoiding the ifdef. [ dhansen: changelog munging. More imperative voice ] | ||||