| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect boundary conditions in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| In Eclipse OMR versions up to 0.11, the arraycmp SIMD implementation for Z and P does not check if the number of bytes to compare is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: xpad - fix out-of-bounds access for Share button
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length. |
| An out-of-bounds read (buffer over-read) vulnerability exists in QTextCodec::codecForName() in Qt. When the function is called with a QByteArray that is not NUL-terminated (for example, one created with QByteArray::fromRawData()), the codec-name matching routine reads past the end of the supplied buffer. In most cases this results in an incorrect text codec being selected; in the worst case, if the over-read reaches unmapped memory, the process crashes (denial of service). The over-read is bounded by the length of the longest codec-name candidate, and the out-of-bounds bytes are only compared internally against Qt's fixed list of codec names, so no data is disclosed to an attacker. Applications that do not pass non-NUL-terminated QByteArrays to QTextCodec::codecForName() are not exposed. The affected code resides in the Qt5Compat module from Qt 6.0.0 onward, and in Qt Core (qtbase) in Qt 4.x and Qt 5.x. |
| U-Boot through 2026.04-rc3 contains an out-of-bounds read vulnerability in tcp_rx_state_machine() (net/tcp.c) when CONFIG_PROT_TCP is enabled, allowing remote attackers to read beyond TCP segment boundaries by crafting a malicious packet with a mismatched IP total length and TCP data offset field. Attackers can send a packet with an IP total length of 40 bytes and a TCP data offset claiming 60 bytes of header to cause tcp_parse_options() to read 40 bytes past the end of the TCP segment, potentially corrupting connection state variables such as rmt_win_scale and rmt_timestamp to disrupt TCP window calculations. |
| Out-of-bounds read via sun.misc.Unsafe in Apache Fory. When out-of-band zero-copy deserialization is used, readAlignedVarUint() can read beyond the bounds of the underlying buffer. Out-of-band zero-copy deserialization is an opt-in feature; applications that do not use it are not affected.
This issue affects Apache Fory (formerly Apache Fury): from 0.5.0 before 1.4.0. Versions before 0.11.0 were published under the Maven coordinates org.apache.fury:fury-core.
Users are recommended to upgrade to version 1.4.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: cypress_m8: validate interrupt packet headers
cypress_read_int_callback() parses the interrupt-in buffer according to
the selected Cypress packet format. Format 1 has a two-byte status/count
header and format 2 has a one-byte combined status/count header. The
usb-serial core sizes the interrupt-in buffer from the endpoint
descriptor's wMaxPacketSize, and successful interrupt transfers can
complete short when URB_SHORT_NOT_OK is not set.
Check that the completed packet contains the selected header before
reading it. Malformed short reports are ignored and the interrupt URB is
resubmitted through the existing retry path, preventing out-of-bounds
header-byte reads.
KASAN report as below:
KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0
Read of size 1
Call trace:
cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009)
__usb_hcd_giveback_urb()
dummy_timer()
[ johan: use constants in header length sanity checks ] |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops
Commit d07b26f39246 ("ksmbd: require minimum ACE size in
smb_check_perm_dacl()") introduced a transposed bounds check:
if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE)
Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates
to `aces_size < 0`. Because `aces_size` is always non-negative, this
check becomes dead code and never breaks the loop.
Worse, that commit removed the old 4-byte guard, meaning the loop now
reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This
re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation
during subsequent SMB2_CREATE operations.
Fix this by properly transposing the comparison to require at least
16 bytes (8-byte offset + 8-byte SID base), matching the correct form
used in smb_inherit_dacl(). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
nexio_read_data() pulls data_len and x_len from a packed __be16 header
in the device's interrupt packet and then walks packet->data[0..x_len)
and packet->data[x_len..data_len) comparing each byte against a
threshold.
Both fields are 16-bit on the wire (max 65535). The existing
adjustments shave at most 0x100 / 0x80 off, so the loop bound can still
reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size
(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the
packed header — so packet->data[] has 1017 valid bytes. read_data()
callbacks are not given urb->actual_length, and nothing else bounds the
walk.
A device that lies about its length can get a ~64 KiB out-of-bounds read
past the coherent DMA allocation. The first index whose byte exceeds
NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the
reported touch coordinates, so adjacent kernel memory contents leak to
userspace as ABS_X / ABS_Y events. Far enough out, the read can also
hit an unmapped page and fault.
Fix this all by clamping data_len to the buffer's data[] capacity and
x_len to data_len. |
| xrdp is an open source RDP server. Versions 0.10.6 and prior contain a heap out-of-bounds read vulnerability within the FIPS-specific receive paths. This vulnerability does not affect the default configuration of xrdp. The vulnerability is only exploitable when the security layer is set to security_layer=negotiate or security_layer=rdp, and the crypto level is changed to crypt_level=fips in xrdp.ini. In this specific non-default mode, the server fails to validate the FIPS padding length field, leading to a pointer underflow and a subsequent negative length calculation. An unauthenticated remote attacker can exploit this by sending a crafted FIPS-protected PDU, causing a heap out-of-bounds read that results in a process crash and denial of service (DoS). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service. This issue has been fixed in version 0.10.6.1. |
| A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers
Properly validate the count passed from a device when calling
svdm_consume_identity() or svdm_consume_identity_sop_prime() as the
device-controlled value could index off of the static arrays, which
could leak data. |
| xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the processing of Client Control PDUs. During the RDP connection sequence, the parser does not perform sufficient length validation before reading specific data fields from the network stream. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted, truncated Client Control PDU. Due to missing bounds checks, the xrdp process may perform out-of-bounds memory reads, which can result in the termination of the service (Denial of Service). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service.This issue has been fixed in version 0.10.6.1. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Validate framework notification message layout
Framework notifications carry an indirect message in the shared RX
buffer. Validate the reported offset and size before using them, reject
zero-length payloads, and ensure that any non-header payload starts at
the UUID field rather than in the middle of the message header.
Use the validated offset and size values for both kmemdup() and the UUID
parsing path so malformed firmware data cannot drive an out-of-bounds
read or an oversized allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.
The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: fix missing length checks in hidp_input_report()
hidp_input_report() reads keyboard and mouse payload data from an skb
without first verifying that skb->len contains enough data.
hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching
to hidp_input_report(). If a paired device sends a truncated packet,
the handler reads beyond the valid skb data, resulting in an
out-of-bounds read of skb data. The OOB bytes may be interpreted as
phantom key presses or spurious mouse movement.
Replace the open-coded length tracking and pointer arithmetic with
skb_pull_data() calls. skb_pull_data() returns NULL if the requested
bytes are not present, eliminating the need for a manual size variable
and the separate skb->len guard. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Prefer NLA_NUL_STRING
These attributes are evaluated as c-string (passed to strcmp), but
NLA_STRING doesn't check for the presence of a \0 terminator.
Either this needs to switch to nla_strcmp() and needs to adjust printf fmt
specifier to not use plain %s, or this needs to use NLA_NUL_STRING.
As the code has been this way for long time, it seems to me that userspace
does include the terminating nul, even tough its not enforced so far, and
thus NLA_NUL_STRING use is the simpler solution. |
| HDF5 is a high-performance library and a file format specification that implements the HDF5 data model. If a file is corrupted such that an array datatype's size, the number of elements, and the element size are not in agreement it can trigger an out of bounds read. The array datatype stores the full size of the datatype (`dt->shared->size`) separately from the number of elements (`dt->shared->u.array.nelem`) and the element size (`dt->shared->parent->shared->size`). If any one of these are corrupted so that they don't align with the others (element size * nelem = full size), it can lead to an out of bounds read. Depending on what is corrupted, it can alter the type of out of bounds read triggered. The vulnerability is present only in files that have been maliciously altered, as its generally not possible to independently alter the full size of the datatype, the element count and the element size. As such, this is only present if a malicious actor is altering files, and won't appear in regular usage. |
| NanoMQ contains a protocol-semantics flaw in its MQTT v5 `SUBSCRIBE` handling: if a subscription entry is missing the final 1-byte `Subscription Options` field, the broker may still accept the malformed packet and install the subscription into internal broker state. Under a specific packet-length construction, the same parser flaw also causes a 1-byte out-of-bounds read that crosses the real heap allocation boundary and is detected by ASAN as a `heap-buffer-overflow`.
If the consumed byte happens to look acceptable, NanoMQ may continue and append the malformed subscription entry into its internal `subinfol` state. In that case, a `SUBSCRIBE` packet that should be rejected by MQTT rules is instead treated as a successful subscription. Whether ASAN reports the bug does not depend on MQTT's logical `remain` boundary; it depends on whether the read crosses the real heap allocation boundary of the underlying message buffer. In other words, these are not two unrelated issues. They are two manifestations of the same parsing defect: by default, it appears as a semantic vulnerability, and under suitable input conditions, it also becomes a verifiable out-of-bounds read vulnerability. |
| xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the parsing of Client Security Data within the Client MCS Connect Initial PDU with GCC Conference Create Request during the connection sequence. During the initial capability and security negotiation phase, the parser fails to perform sufficient length validation for the incoming data block. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted RDP packet containing malformed data. Due to missing bounds checks, the xrdp process may read a small number of bytes beyond the declared data block boundary, potentially disclosing process memory contents that could be combined with other vulnerabilities. This issue has been fixed in version 0.10.6.1. |
