| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A web page that contains unusual WebGPU content loaded into the GPU GLES render process and can trigger write UAF crash in the GPU GLES user-space shared library. On certain platforms, when the process executing graphics workload has system privileges this could enable subsequent exploit on the system. |
| A flaw was found in libarchive. An Undefined Behavior vulnerability exists in the zisofs decompression logic, caused by improper validation of a field (`pz_log2_bs`) read from ISO9660 Rock Ridge extensions. A remote attacker can exploit this by supplying a specially crafted ISO file. This can lead to incorrect memory allocation and potential application crashes, resulting in a denial-of-service (DoS) condition. |
| A flaw was found in libarchive. A NULL pointer dereference vulnerability exists in the ACL parsing logic, specifically within the archive_acl_from_text_nl() function. When processing a malformed ACL string (such as a bare "d" or "default" tag without subsequent fields), the function fails to perform adequate validation before advancing the pointer. An attacker can exploit this by providing a maliciously crafted archive, causing an application utilizing the libarchive API (such as bsdtar) to crash, resulting in a Denial of Service (DoS). |
| A flaw was found in gnutls. A remote, unauthenticated attacker can exploit this vulnerability by sending a specially crafted ClientHello message with an invalid Pre-Shared Key (PSK) binder value during the TLS handshake. This can lead to a NULL pointer dereference, causing the server to crash and resulting in a remote Denial of Service (DoS) condition. |
| A flaw was found in GNUPlot. A segmentation fault via IO_str_init_static_internal may jeopardize the environment. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bounds write in smb2_get_ea() EA alignment
smb2_get_ea() applies 4-byte alignment padding via memset() after
writing each EA entry. The bounds check on buf_free_len is performed
before the value memcpy, but the alignment memset fires unconditionally
afterward with no check on remaining space.
When the EA value exactly fills the remaining buffer (buf_free_len == 0
after value subtraction), the alignment memset writes 1-3 NUL bytes
past the buf_free_len boundary. In compound requests where the response
buffer is shared across commands, the first command (e.g., READ) can
consume most of the buffer, leaving a tight remainder for the QUERY_INFO
EA response. The alignment memset then overwrites past the physical
kvmalloc allocation into adjacent kernel heap memory.
Add a bounds check before the alignment memset to ensure buf_free_len
can accommodate the padding bytes.
This is the same bug pattern fixed by commit beef2634f81f ("ksmbd: fix
potencial OOB in get_file_all_info() for compound requests") and
commit fda9522ed6af ("ksmbd: fix OOB write in QUERY_INFO for compound
requests"), both of which added bounds checks before unconditional
writes in QUERY_INFO response handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: reject zero-length fixed buffer import
validate_fixed_range() admits buf_addr at the exact end of the
registered region when len is zero, because the check uses strict
greater-than (buf_end > imu->ubuf + imu->len). io_import_fixed()
then computes offset == imu->len, which causes the bvec skip logic
to advance past the last bio_vec entry and read bv_offset from
out-of-bounds slab memory.
Return early from io_import_fixed() when len is zero. A zero-length
import has no data to transfer and should not walk the bvec array
at all.
BUG: KASAN: slab-out-of-bounds in io_import_reg_buf+0x697/0x7f0
Read of size 4 at addr ffff888002bcc254 by task poc/103
Call Trace:
io_import_reg_buf+0x697/0x7f0
io_write_fixed+0xd9/0x250
__io_issue_sqe+0xad/0x710
io_issue_sqe+0x7d/0x1100
io_submit_sqes+0x86a/0x23c0
__do_sys_io_uring_enter+0xa98/0x1590
Allocated by task 103:
The buggy address is located 12 bytes to the right of
allocated 584-byte region [ffff888002bcc000, ffff888002bcc248) |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Fix potential bad container_of in intel_pmu_hw_config
Auto counter reload may have a group of events with software events
present within it. The software event PMU isn't the x86_hybrid_pmu and
a container_of operation in intel_pmu_set_acr_caused_constr (via the
hybrid helper) could cause out of bound memory reads. Avoid this by
guarding the call to intel_pmu_set_acr_caused_constr with an
is_x86_event check. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation
The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.
This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.
Widen valuesize from u8 to u32 to accommodate the full range. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pxp: Clear restart flag in pxp_start after jumping back
If we don't clear the flag we'll keep jumping back at the beginning of
the function once we reach the end.
(cherry picked from commit 0850ec7bb2459602351639dccf7a68a03c9d1ee0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ioc32: stop speculation on the drm_compat_ioctl path
The drm compat ioctl path takes a user controlled pointer, and then
dereferences it into a table of function pointers, the signature method
of spectre problems. Fix this up by calling array_index_nospec() on the
index to the function pointer list. |
| Insufficient verification of data authenticity in PackageManagerService prior to SMR Mar-2026 Release 1 allows local attackers to modify the installation restriction of specific application. |
| TOTOLINK N200RE V5 was discovered to contain a command injection vulnerability via the macstr and bandstr parameters in the formMapDelDevice function. |
| An issue in Krayin CRM v.2.1.5 and fixed in v.2.1.6 allows a remote attacker to execute arbitrary code via the compose email function |
| A heap-based buffer overflow in the Kerberos hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted Kerberos hash file. The issue affects module_hash_decode in multiple Kerberos-related modules because account_info_len is calculated from untrusted delimiter positions without upper-bound validation before memcpy copies the data into a fixed-size account_info buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic: spifc-a4: unregister ECC engine on probe failure and remove() callback
aml_sfc_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal. |
| Cross Site Scripting vulnerability in andrewtch88 mvc-ecommerce v.1.0 allows a remote attacker to execute arbitrary code and obtain sensitive information via the product_catalogue.php component |
