| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm90) Stop work before releasing hwmon device
Sashiko reports:
In lm90_probe(), the devm action to cancel the alert_work and report_work
(lm90_restore_conf) is registered in lm90_init_client() before
devm_hwmon_device_register_with_info() is called.
Because devm executes cleanup actions in reverse order during module
unbind or probe failure, the hwmon device is unregistered and freed first.
If lm90_alert_work() or lm90_report_alarms() runs in the window between
the hwmon device being freed and the delayed works being cancelled,
lm90_update_alarms() will dereference the freed data->hwmon_dev here.
Fix the problem by canceling the workers separately after registering
the hwmon device and before registering the interrupt handler. This ensures
that the workers are canceled after interrupts are disabled and before
the hwmon device is released. Add "shutdown" flag to indicate that device
shutdown is in progress to prevent workers from being re-armed. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Avoid NULL return from hist_field_name() on truncation
hist_field_name() returns "" everywhere except the fully-qualified
VAR_REF/EXPR case, where snprintf() truncation returns NULL early
and bypasses the bottom NULL->"" guard. Callers don't expect NULL:
strcat(expr, hist_field_name(field, 0)) at trace_events_hist.c:1758
and the strcmp() in the sort-key match loop at :4804 both deref it.
system and event_name are bounded by MAX_EVENT_NAME_LEN, but the
field name on a VAR_REF is kstrdup'd from a histogram variable
name parsed out of the trigger string and has no length cap, so
a long enough var name in a fully qualified reference can reach
the truncation path.
Keep the length check but leave field_name as "" on overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: remove the software node when deactivating the aggregator
The dynamic software node we create for the aggregator platform device
when using configfs is leaked when the device is deactivated. Destroy it
as the last step in the tear-down path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix exec_queue leak on width check in stream open
In xe_oa_stream_open_ioctl(), when param.exec_q->width > 1 the
function returns -EOPNOTSUPP directly, skipping the existing
err_exec_q cleanup path. The exec_queue reference obtained by
xe_exec_queue_lookup() is leaked.
The exec queue holds a reference on the xe_file, which is only
dropped during queue teardown. The leaked lookup ref is not on
the file's exec_queue xarray, so file close cannot release it.
This keeps both the exec queue and the file private state pinned
indefinitely.
Jump to err_exec_q instead of returning directly so the reference
is released.
(cherry picked from commit 339fa0be9e4a5d69fa47e91f4a36574224fb478f) |
| In the Linux kernel, the following vulnerability has been resolved:
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
nexio_read_data() pulls data_len and x_len from a packed __be16 header
in the device's interrupt packet and then walks packet->data[0..x_len)
and packet->data[x_len..data_len) comparing each byte against a
threshold.
Both fields are 16-bit on the wire (max 65535). The existing
adjustments shave at most 0x100 / 0x80 off, so the loop bound can still
reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size
(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the
packed header — so packet->data[] has 1017 valid bytes. read_data()
callbacks are not given urb->actual_length, and nothing else bounds the
walk.
A device that lies about its length can get a ~64 KiB out-of-bounds read
past the coherent DMA allocation. The first index whose byte exceeds
NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the
reported touch coordinates, so adjacent kernel memory contents leak to
userspace as ABS_X / ABS_Y events. Far enough out, the read can also
hit an unmapped page and fault.
Fix this all by clamping data_len to the buffer's data[] capacity and
x_len to data_len. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_sfb: Replace direct dequeue call with peek and qdisc_dequeue_peeked
When sfb has children (eg qfq qdisc) whose peek() callback is
qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such
qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from
its child (sfb in this case), it will do the following:
1a. do a peek() - and when sensing there's an skb the child can offer, then
- the child in this case(sfb) calls its child's (qfq) peek.
qfq does the right thing and will return the gso_skb queue packet.
Note: if there wasnt a gso_skb entry then qfq will store it there.
1b. invoke a dequeue() on the child (sfb). And herein lies the problem.
- sfb will call the child's dequeue() which will essentially just
try to grab something of qfq's queue.
[ 127.594489][ T453] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 127.594741][ T453] CPU: 2 UID: 0 PID: 453 Comm: ping Not tainted 7.1.0-rc1-00035-gac961974495b-dirty #793 PREEMPT(full)
[ 127.595059][ T453] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 127.595254][ T453] RIP: 0010:qfq_dequeue+0x35c/0x1650 [sch_qfq]
[ 127.595461][ T453] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
[ 127.596081][ T453] RSP: 0018:ffff88810e5af440 EFLAGS: 00010216
[ 127.596337][ T453] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 127.596623][ T453] RDX: 0000000000000009 RSI: 0000001880000000 RDI: ffff888104fd82b0
[ 127.596917][ T453] RBP: ffff888104fd8000 R08: ffff888104fd8280 R09: 1ffff110211893a3
[ 127.597165][ T453] R10: 1ffff110211893a6 R11: 1ffff110211893a7 R12: 0000001880000000
[ 127.597404][ T453] R13: ffff888104fd82b8 R14: 0000000000000048 R15: 0000000040000000
[ 127.597644][ T453] FS: 00007fc380cbfc40(0000) GS:ffff88816f2a8000(0000) knlGS:0000000000000000
[ 127.597956][ T453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 127.598160][ T453] CR2: 00005610aa9890a8 CR3: 000000010369e000 CR4: 0000000000750ef0
[ 127.598390][ T453] PKRU: 55555554
[ 127.598509][ T453] Call Trace:
[ 127.598629][ T453] <TASK>
[ 127.598718][ T453] ? mark_held_locks+0x40/0x70
[ 127.598890][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599053][ T453] sfb_dequeue+0x88/0x4d0
[ 127.599174][ T453] ? ktime_get+0x137/0x230
[ 127.599328][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599480][ T453] ? qdisc_peek_dequeued+0x7b/0x350 [sch_qfq]
[ 127.599670][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599831][ T453] tbf_dequeue+0x6b1/0x1098 [sch_tbf]
[ 127.599988][ T453] __qdisc_run+0x169/0x1900
The right thing to do in #1b is to grab the skb off gso_skb queue.
This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked()
method instead. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix dst corruption in same register operation
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix setup list UAF on proc write error
snd_pcm_oss_proc_write() links a newly allocated setup entry into the
OSS setup list before duplicating the task name. If the task-name
allocation fails, the error path frees the already linked entry and
leaves setup_list pointing at freed memory.
A later OSS device open can then walk the stale list entry in
snd_pcm_oss_look_for_setup() and dereference freed memory.
Allocate the task name and initialize the setup entry before publishing
the entry on setup_list. Also fetch the initial proc read iterator only
after taking setup_mutex, so all setup_list traversal follows the same
list lifetime rules. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: call ethnl_ops_complete() on module flash errors
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt()
The skb_clone() function can return NULL if memory allocation fails.
send_mcast_pkt() calls skb_clone() without checking the return value, which
can lead to a NULL pointer dereference in send_pkt() when it dereferences
skb->data.
Add a NULL check after skb_clone() and skip the peer if the clone fails. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: refuse to enslave CAN devices
syzbot reported a kernel paging request crash in
can_rx_unregister() inside net/can/af_can.c. The crash occurs
because a virtual CAN device (vxcan) is being enslaved to a
bonding master.
During the enslavement process, the bonding driver mutates
and modifies the network device states to fit an Ethernet-like
aggregation model. However, CAN devices operate on a completely
different Layer 2 architecture, relying on the CAN mid-layer
private data structure (can_ml_priv) instead of standard
Ethernet structures. Since bonding does not initialize or
maintain these CAN structures, subsequent operations on the
half-enslaved interface (such as closing associated sockets
via isotp_release) lead to a null-pointer dereference when
accessing the CAN receiver lists.
Bonding CAN interfaces is architecturally invalid as CAN lacks
MAC addresses, ARP capabilities, and standard Ethernet
link-layer mechanisms. While generic loopback devices are
blocked globally in net/core/dev.c, virtual CAN devices
bypass this check because they do not carry the IFF_LOOPBACK
flag, despite acting as local software-loopbacks.
Fix this by explicitly blocking network devices of type
ARPHRD_CAN from being enslaved at the very beginning of
bond_enslave(). This prevents illegal state mutations,
eliminates the resulting KASAN crashes, and avoids potential
memory leaks from incomplete socket cleanups.
As the CAN support has been added a long time after bonding
the Fixes-tag points to the introduction of ARPHRD_CAN that
would have needed a specific handling in bonding_main.c. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure
The goto err label leads to:
genlmsg_cancel(skb, ehdr);
return ret;
If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg.
There's nothing to cancel, and passing an error pointer to
genlmsg_cancel() would cause a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
tcf_mirred_act() checks sched_mirred_nest against MIRRED_NEST_LIMIT (4)
to prevent deep recursion. However, when the action uses blockcast
(tcfm_blockid != 0), the function returns at the tcf_blockcast() call
BEFORE reaching the counter increment. As a result, the recursion
counter never advances and the limit check is entirely bypassed.
When two devices share a TC egress block with a mirred blockcast rule,
a packet egressing on device A is mirrored to device B via blockcast;
device B's egress TC re-enters tcf_mirred_act() via blockcast and
mirrors back to A, creating an unbounded recursion loop:
tcf_mirred_act -> tcf_blockcast -> tcf_mirred_to_dev -> dev_queue_xmit
-> sch_handle_egress -> tcf_classify -> tcf_mirred_act -> (repeat)
This recursion continues until the kernel stack overflows.
The bug is reachable from an unprivileged user via
unshare(CLONE_NEWUSER | CLONE_NEWNET): user namespaces grant
CAP_NET_ADMIN in the new network namespace, which is sufficient to
create dummy devices, attach clsact qdiscs with shared blocks, and
install mirred blockcast filters.
BUG: TASK stack guard page was hit at ffffc90000b7fff8
Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI
CPU: 2 UID: 1000 PID: 169 Comm: poc Not tainted 7.0.0-rc7-next-20260410
RIP: 0010:xas_find+0x17/0x480
Call Trace:
xa_find+0x17b/0x1d0
tcf_mirred_act+0x640/0x1060
tcf_action_exec+0x400/0x530
basic_classify+0x128/0x1d0
tcf_classify+0xd83/0x1150
tc_run+0x328/0x620
__dev_queue_xmit+0x797/0x3100
tcf_mirred_to_dev+0x7b1/0xf70
tcf_mirred_act+0x68a/0x1060
[repeating ~30+ times until stack overflow]
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by incrementing sched_mirred_nest before calling
tcf_blockcast() and decrementing it on return, mirroring the
non-blockcast path. This ensures subsequent recursive entries see the
updated counter and are correctly limited by MIRRED_NEST_LIMIT. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer
The tagged FIFO path declares iio_buff on the stack with __aligned(8)
but no initializer, but there is a hole in the structure, which will
then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be
copied, but the space between that and the timestamp are not
initialized.
Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak
issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan,
but for the tagged path it only added the alignment qualifier and not
the initializer :(
Fix this by just zero-initializing the structure on the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: omninet: fix memory corruption with small endpoint
Make sure that the bulk-out buffers are at least as large as the
hardcoded transfer size to avoid user-controlled slab corruption should
a malicious device report a smaller endpoint max packet size than
expected. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: belkin_sa: validate interrupt status length
The Belkin interrupt callback treats interrupt data as a four-byte
status report and reads LSR/MSR fields at offsets 2 and 3. The
interrupt-in buffer length is derived from endpoint wMaxPacketSize, and
short interrupt transfers may complete successfully with a smaller
actual_length.
Check the completed interrupt packet length before parsing status
fields so short interrupt endpoints and short successful packets are
ignored instead of causing out-of-bounds or stale status-byte reads.
KASAN report as below:
BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback()
Read of size 1
Call trace:
belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202)
__usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630)
dummy_timer() (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker
drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the
descriptor cursor by an attacker-supplied fip_dlen without ever
requiring dlen >= sizeof(struct fip_desc) in the default branch. The
named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked
their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor
(fip_dtype >= 128, which the standard requires receivers to silently
ignore) skipped that check entirely.
An unauthenticated L2 peer on the FCoE control VLAN could hang
fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely
by emitting one FIP CVL frame whose single descriptor had fip_dtype ==
FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes
per iteration and the loop condition rlen >= sizeof(*desc) stayed true
forever, blocking every subsequent FIP frame on that controller.
Tighten the outer dlen guard to also reject dlen < sizeof(struct
fip_desc), so a malformed descriptor whose length cannot even cover the
descriptor header is rejected before the switch. This is the same
lower-bound the named cases already apply and is the minimum scope that
closes the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Add missing bits in airoha_qdma_cleanup_tx_queue()
Similar to airoha_qdma_cleanup_rx_queue(), reset DMA TX descriptors in
airoha_qdma_cleanup_tx_queue routine. Moreover, reset TX_DMA_IDX to
TX_CPU_IDX to notify the NIC the QDMA TX ring is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int()
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rsnd: Fix potential out-of-bounds access of component_dais[]
component_dais[RSND_MAX_COMPONENT] is initially zero-initialized
and later populated in rsnd_dai_of_node(). However, the existing boundary check:
if (i >= RSND_MAX_COMPONENT)
does not guarantee that the last valid element remains zero. As a result,
the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero,
which may lead to an out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
