| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Failure to validate the address and size in TEE (Trusted Execution Environment) may allow a malicious x86 attacker to send malformed messages to the graphics mailbox resulting in an overlap of a TMR (Trusted Memory Region) that was previously allocated by the ASP bootloader leading to a potential loss of integrity. |
| A guest can trigger an infinite loop in the hda audio driver. |
| Weak authentication in EOL ASP.NET Core allows an unauthorized attacker to elevate privileges over a network.
NOTE: This CVE affects only End Of Life (EOL) software components. The vendor, Microsoft, has indicated there will be no future updates nor support provided upon inquiry. |
| Default Credentail vulnerabilities allows access to an Aspect device using publicly available default credentials since the system does not require the installer to change default credentials.
Affected products:
ABB ASPECT - Enterprise v3.07.02;
NEXUS Series v3.07.02;
MATRIX Series v3.07.02 |
| A vulnerability has been identified in the Now Platform that could result in data being inferred without authorization. Under certain conditional access control list (ACL) configurations, this vulnerability could enable unauthenticated and authenticated users to use range query requests to infer instance data that is not intended to be accessible to them.
To assist customers in enhancing access controls, ServiceNow has introduced additional access control frameworks in Xanadu and Yokohama, such as Query ACLs, Security Data Filters and Deny-Unless ACLs.
Additionally, in May 2025, ServiceNow delivered to customers a security update that is designed to enhance customer ACL configurations.
Customers, please review the KB Articles in the References section. |
| Deck Mate 1 executes firmware directly from an external EEPROM without verifying authenticity or integrity. An attacker with physical access can replace or reflash the EEPROM to run arbitrary code that persists across reboots. Because this design predates modern secure-boot or signed-update mechanisms, affected systems should be physically protected or retired from service. The vendor has not indicated that firmware updates are available for this legacy model. |
| Out-of-bounds Read vulnerability (CWE-125) was found in CX-Programmer. Attackers may be able to read sensitive information or cause an application crash by abusing this vulnerability. |
| Integer overflow vulnerability exists in SimplCommerce at commit 230310c8d7a0408569b292c5a805c459d47a1d8f in the shopping cart functionality. The issue lies in the quantity parameter in the CartController's AddToCart method. |
| A heap-based buffer over-read vulnerability was found in the X.org server's ProcAppleDRICreatePixmap() function. This issue occurs when byte-swapped length values are used in replies, potentially leading to memory leakage and segmentation faults, particularly when triggered by a client with a different endianness. This vulnerability could be exploited by an attacker to cause the X server to read heap memory values and then transmit them back to the client until encountering an unmapped page, resulting in a crash. Despite the attacker's inability to control the specific memory copied into the replies, the small length values typically stored in a 32-bit integer can result in significant attempted out-of-bounds reads. |
| A heap-based buffer over-read vulnerability was found in the X.org server's ProcXIGetSelectedEvents() function. This issue occurs when byte-swapped length values are used in replies, potentially leading to memory leakage and segmentation faults, particularly when triggered by a client with a different endianness. This vulnerability could be exploited by an attacker to cause the X server to read heap memory values and then transmit them back to the client until encountering an unmapped page, resulting in a crash. Despite the attacker's inability to control the specific memory copied into the replies, the small length values typically stored in a 32-bit integer can result in significant attempted out-of-bounds reads. |
| A buffer overflow vulnerability exists in the WinaXe FTP Client version 7.7 within the FTP banner parsing functionality, WCMDPA10.dll. When the client connects to a remote FTP server and receives an overly long '220 Server Ready' response, the vulnerable component responsible for parsing the banner overflows a stack buffer, leading to arbitrary code execution under the context of the user. |
| A stack-based buffer overflow vulnerability exists in the login functionality of Disk Pulse Enterprise version 9.0.34. An attacker can send a specially crafted HTTP POST request to the /login endpoint with an overly long username parameter, causing a buffer overflow in the libspp.dll component. Successful exploitation allows arbitrary code execution with SYSTEM privileges. |
| The Versa Director software exposes a number of services by default and allow attackers an easy foothold due to default credentials and multiple accounts (most with sudo access) that utilize the same default credentials. By default, Versa director exposes ssh and postgres to the internet, alongside a host of other services.
Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers.
Workarounds or Mitigation:
Versa recommends the following security controls:
1) Change default passwords to complex passwords
2) Passwords must be complex with at least 8 characters that comprise of upper case, and lower case alphabets, as well as at at least one digit, and one special character
3) Passwords must be changed at least every 90 days
4) Password change history is checked to ensure that the at least the last 5 passwords must be used when changing password.
5) Review and audit logs for all authentication attempts to check for unauthorized/suspicious login attempts and enforce remediation steps. |
| COMMAX CVD-Axx DVR 5.1.4 contains weak default administrative credentials that allow remote password attacks and disclose RTSP stream. Attackers can exploit this by sending a POST request with the 'passkey' parameter set to '1234', allowing them to access the web control panel. |
| The ECDSA implementation of the Elliptic package generates incorrect signatures if an interim value of 'k' (as computed based on step 3.2 of RFC 6979 https://datatracker.ietf.org/doc/html/rfc6979 ) has leading zeros and is susceptible to cryptanalysis, which can lead to secret key exposure. This happens, because the byte-length of 'k' is incorrectly computed, resulting in its getting truncated during the computation. Legitimate transactions or communications will be broken as a result. Furthermore, due to the nature of the fault, attackers could–under certain conditions–derive the secret key, if they could get their hands on both a faulty signature generated by a vulnerable version of Elliptic and a correct signature for the same inputs.
This issue affects all known versions of Elliptic (at the time of writing, versions less than or equal to 6.6.1). |
| An unauthenticated remote attacker can cause a buffer overflow which could lead to unexpected behaviour or DoS via Bluetooth or RS-232 interface. |
| @solana/web3.js is the Solana JavaScript SDK. Using particular inputs with `@solana/web3.js` will result in memory exhaustion (OOM). If you have a server, client, mobile, or desktop product that accepts untrusted input for use with `@solana/web3.js`, your application/service may crash, resulting in a loss of availability. This vulnerability is fixed in 1.0.1, 1.10.2, 1.11.1, 1.12.1, 1.1.2, 1.13.1, 1.14.1, 1.15.1, 1.16.2, 1.17.1, 1.18.1, 1.19.1, 1.20.3, 1.21.1, 1.22.1, 1.23.1, 1.24.3, 1.25.1, 1.26.1, 1.27.1, 1.28.1, 1.2.8, 1.29.4, 1.30.3, 1.31.1, 1.3.1, 1.32.3, 1.33.1, 1.34.1, 1.35.2, 1.36.1, 1.37.3, 1.38.1, 1.39.2, 1.40.2, 1.41.11, 1.4.1, 1.42.1, 1.43.7, 1.44.4, 1.45.1, 1.46.1, 1.47.5, 1.48.1, 1.49.1, 1.50.2, 1.51.1, 1.5.1, 1.52.1, 1.53.1, 1.54.2, 1.55.1, 1.56.3, 1.57.1, 1.58.1, 1.59.2, 1.60.1, 1.61.2, 1.6.1, 1.62.2, 1.63.2, 1.64.1, 1.65.1, 1.66.6, 1.67.3, 1.68.2, 1.69.1, 1.70.4, 1.71.1, 1.72.1, 1.7.2, 1.73.5, 1.74.1, 1.75.1, 1.76.1, 1.77.4, 1.78.8, 1.79.1, 1.80.1, 1.81.1, 1.8.1, 1.82.1, 1.83.1, 1.84.1, 1.85.1, 1.86.1, 1.87.7, 1.88.1, 1.89.2, 1.90.2, 1.9.2, and 1.91.3. |
| Trusted Firmware-A (TF-A) before 2.10 has a potential read out-of-bounds in the SDEI service. The input parameter passed in register x1 is not validated well enough in the function sdei_interrupt_bind. The parameter is passed to a call to plat_ic_get_interrupt_type. It can be any arbitrary value passing checks in the function plat_ic_is_sgi. A compromised Normal World (Linux kernel) can enable a root-privileged attacker to issue arbitrary SMC calls. Using this primitive, he can control the content of registers x0 through x6, which are used to send parameters to TF-A. Out-of-bounds addresses can be read in the context of TF-A (EL3). Because the read value is never returned to non-secure memory or in registers, no leak is possible. An attacker can still crash TF-A, however. |
| An unauthenticated remote attacker can use a malicious OPC UA client to send a crafted request to affected CODESYS products which can cause a DoS due to incorrect calculation of buffer size.
|
| An unauthenticated remote attacker may use a stack based buffer overflow in the u-link Management API to gain full access on the affected devices. |
