Export limit exceeded: 348500 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348500 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43210 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: ring-buffer: Fix to check event length before using Check the event length before adding it for accessing next index in rb_read_data_buffer(). Since this function is used for validating possibly broken ring buffers, the length of the event could be broken. In that case, the new event (e + len) can point a wrong address. To avoid invalid memory access at boot, check whether the length of each event is in the possible range before using it. | ||||
| CVE-2026-43209 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: minix: Add required sanity checking to minix_check_superblock() The fs/minix implementation of the minix filesystem does not currently support any other value for s_log_zone_size than 0. This is also the only value supported in util-linux; see mkfs.minix.c line 511. In addition, this patch adds some sanity checking for the other minix superblock fields, and moves the minix_blocks_needed() checks for the zmap and imap also to minix_check_super_block(). This also closes a related syzbot bug report. | ||||
| CVE-2026-43208 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: do not pass flow_id to set_rps_cpu() Blamed commit made the assumption that the RPS table for each receive queue would have the same size, and that it would not change. Compute flow_id in set_rps_cpu(), do not assume we can use the value computed by get_rps_cpu(). Otherwise we risk out-of-bound access and/or crashes. | ||||
| CVE-2026-43207 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix error handling in probe function Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent resource leak. Add check for the return value of vpu_get_plat_device() to prevent null pointer dereference. And vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak. | ||||
| CVE-2026-43206 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set() The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8 bytes via memset without checking the buffer size parameter. This allows unprivileged userspace to trigger an out-of bounds kernel memory write by passing a small buffer, leading to potential privilege escalation. | ||||
| CVE-2026-43204 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6asm: drop DSP responses for closed data streams 'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses after closing")' attempted to ignore DSP responses arriving after a stream had been closed. However, those responses were still handled, causing lockups. Fix this by unconditionally dropping all DSP responses associated with closed data streams. | ||||
| CVE-2026-43202 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: vt8500lcdfb: fix missing dma_free_coherent() fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not freed if the error path is reached. | ||||
| CVE-2026-43201 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: APEI/GHES: ARM processor Error: don't go past allocated memory If the BIOS generates a very small ARM Processor Error, or an incomplete one, the current logic will fail to deferrence err->section_length and ctx_info->size Add checks to avoid that. With such changes, such GHESv2 records won't cause OOPSes like this: [ 1.492129] Internal error: Oops: 0000000096000005 [#1] SMP [ 1.495449] Modules linked in: [ 1.495820] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.18.0-rc1-00017-gabadcc3553dd-dirty #18 PREEMPT [ 1.496125] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 [ 1.496433] Workqueue: kacpi_notify acpi_os_execute_deferred [ 1.496967] pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.497199] pc : log_arm_hw_error+0x5c/0x200 [ 1.497380] lr : ghes_handle_arm_hw_error+0x94/0x220 0xffff8000811c5324 is in log_arm_hw_error (../drivers/ras/ras.c:75). 70 err_info = (struct cper_arm_err_info *)(err + 1); 71 ctx_info = (struct cper_arm_ctx_info *)(err_info + err->err_info_num); 72 ctx_err = (u8 *)ctx_info; 73 74 for (n = 0; n < err->context_info_num; n++) { 75 sz = sizeof(struct cper_arm_ctx_info) + ctx_info->size; 76 ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + sz); 77 ctx_len += sz; 78 } 79 and similar ones while trying to access section_length on an error dump with too small size. [ rjw: Subject tweaks ] | ||||
| CVE-2026-43199 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by replacing mlx5_query_mac_address() with ether_addr_copy() to get the local MAC address directly from netdev->dev_addr. The issue occurs because mlx5_query_mac_address() queries the hardware which involves mlx5_cmd_exec() that can sleep, but it is called from the mlx5e_ipsec_handle_event workqueue which runs in atomic context. The MAC address is already available in netdev->dev_addr, so no need to query hardware. This avoids the sleeping call and resolves the bug. Call trace: BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200 __schedule+0x7ab/0xa20 schedule+0x1c/0xb0 schedule_timeout+0x6e/0xf0 __wait_for_common+0x91/0x1b0 cmd_exec+0xa85/0xff0 [mlx5_core] mlx5_cmd_exec+0x1f/0x50 [mlx5_core] mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core] mlx5_query_mac_address+0x19/0x30 [mlx5_core] mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core] mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core] mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core] process_one_work+0x178/0x2e0 worker_thread+0x2ea/0x430 | ||||
| CVE-2026-43198 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix potential race in tcp_v6_syn_recv_sock() Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock() is done too late. After tcp_v4_syn_recv_sock(), the child socket is already visible from TCP ehash table and other cpus might use it. Since newinet->pinet6 is still pointing to the listener ipv6_pinfo bad things can happen as syzbot found. Move the problematic code in tcp_v6_mapped_child_init() and call this new helper from tcp_v4_syn_recv_sock() before the ehash insertion. This allows the removal of one tcp_sync_mss(), since tcp_v4_syn_recv_sock() will call it with the correct context. | ||||
| CVE-2026-43196 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: soc: ti: pruss: Fix double free in pruss_clk_mux_setup() In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np) on the error path. However, after the devm_add_action_or_reset() returns, the of_node_put(clk_mux_np) is called again, causing a double free. Fix by returning directly, to avoid the duplicate of_node_put(). | ||||
| CVE-2026-43194 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link). | ||||
| CVE-2026-43192 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm mpath: Add missing dm_put_device when failing to get scsi dh name When commit fd81bc5cca8f ("scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()") added code to fail parsing the path if scsi_dh_attached_handler_name() failed with -ENOMEM, it didn't clean up the reference to the path device that had just been taken. Fix this, and steamline the error paths of parse_path() a little. | ||||
| CVE-2026-43189 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-async: Fix error handling on steps after finding a match Once an async connection is found to be matching with an fwnode, a sub-device may be registered (in case it wasn't already), its bound operation is called, ancillary links are created, the async connection is added to the sub-device's list of connections and removed from the global waiting connection list. Further on, the sub-device's possible own notifier is searched for possible additional matches. Fix these specific issues: - If v4l2_async_match_notify() failed before the sub-notifier handling, the async connection was unbound and its entry removed from the sub-device's async connection list. The latter part was also done in v4l2_async_match_notify(). - The async connection's sd field was only set after creating ancillary links in v4l2_async_match_notify(). It was however dereferenced in v4l2_async_unbind_subdev_one(), which was called on error path of v4l2_async_match_notify() failure. | ||||
| CVE-2026-43188 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ceph: do not propagate page array emplacement errors as batch errors When fscrypt is enabled, move_dirty_folio_in_page_array() may fail because it needs to allocate bounce buffers to store the encrypted versions of each folio. Each folio beyond the first allocates its bounce buffer with GFP_NOWAIT. Failures are common (and expected) under this allocation mode; they should flush (not abort) the batch. However, ceph_process_folio_batch() uses the same `rc` variable for its own return code and for capturing the return codes of its routine calls; failing to reset `rc` back to 0 results in the error being propagated out to the main writeback loop, which cannot actually tolerate any errors here: once `ceph_wbc.pages` is allocated, it must be passed to ceph_submit_write() to be freed. If it survives until the next iteration (e.g. due to the goto being followed), ceph_allocate_page_array()'s BUG_ON() will oops the worker. Note that this failure mode is currently masked due to another bug (addressed next in this series) that prevents multiple encrypted folios from being selected for the same write. For now, just reset `rc` when redirtying the folio to prevent errors in move_dirty_folio_in_page_array() from propagating. Note that move_dirty_folio_in_page_array() is careful never to return errors on the first folio, so there is no need to check for that. After this change, ceph_process_folio_batch() no longer returns errors; its only remaining failure indicator is `locked_pages == 0`, which the caller already handles correctly. | ||||
| CVE-2026-43187 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: delete attr leaf freemap entries when empty Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow"), Brian Foster observed that it's possible for a small freemap at the end of the end of the xattr entries array to experience a size underflow when subtracting the space consumed by an expansion of the entries array. There are only three freemap entries, which means that it is not a complete index of all free space in the leaf block. This code can leave behind a zero-length freemap entry with a nonzero base. Subsequent setxattr operations can increase the base up to the point that it overlaps with another freemap entry. This isn't in and of itself a problem because the code in _leaf_add that finds free space ignores any freemap entry with zero size. However, there's another bug in the freemap update code in _leaf_add, which is that it fails to update a freemap entry that begins midway through the xattr entry that was just appended to the array. That can result in the freemap containing two entries with the same base but different sizes (0 for the "pushed-up" entry, nonzero for the entry that's actually tracking free space). A subsequent _leaf_add can then allocate xattr namevalue entries on top of the entries array, leading to data loss. But fixing that is for later. For now, eliminate the possibility of confusion by zeroing out the base of any freemap entry that has zero size. Because the freemap is not intended to be a complete index of free space, a subsequent failure to find any free space for a new xattr will trigger block compaction, which regenerates the freemap. It looks like this bug has been in the codebase for quite a long time. | ||||
| CVE-2026-43185 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix signededness bug in smb_direct_prepare_negotiation() smb_direct_prepare_negotiation() casts an unsigned __u32 value from sp->max_recv_size and req->preferred_send_size to a signed int before computing min_t(int, ...). A maliciously provided preferred_send_size of 0x80000000 will return as smaller than max_recv_size, and then be used to set the maximum allowed alowed receive size for the next message. By sending a second message with a large value (>1420 bytes) the attacker can then achieve a heap buffer overflow. This fix replaces min_t(int, ...) with min_t(u32) | ||||
| CVE-2026-43182 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: ccs: Avoid possible division by zero Calculating maximum M for scaler configuration involves dividing by MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably non-zero, the driver was missing the check it in fact was. Fix this. | ||||
| CVE-2026-43181 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: sysfs: fix chip removal with GPIOs exported over sysfs Currently if we export a GPIO over sysfs and unbind the parent GPIO controller, the exported attribute will remain under /sys/class/gpio because once we remove the parent device, we can no longer associate the descriptor with it in gpiod_unexport() and never drop the final reference. Rework the teardown code: provide an unlocked variant of gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken before unregistering the parent device itself. This is done to prevent any new exports happening before we unregister the device completely. | ||||
| CVE-2026-43178 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: procfs: fix possible double mmput() in do_procmap_query() When user provides incorrectly sized buffer for build ID for PROCMAP_QUERY we return with -ENAMETOOLONG error. After recent changes this condition happens later, after we unlocked mmap_lock/per-VMA lock and did mmput(), so original goto out is now wrong and will double-mmput() mm_struct. Fix by jumping further to clean up only vm_file and name_buf. | ||||