| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper authorization in the Intel(R) Quick Assist Technology for some Intel(R) Platforms within Ring 0: Kernel may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| An issue was discovered in a third-party com.factory.mmigroup component, shipped on devices from multiple device manufacturers. Certain software builds for various Android devices contain a vulnerable pre-installed app with a package name of com.factory.mmigroup (versionCode='3', versionName='2.1) that allows local third-party apps to perform various actions, due to inadequate access control, in its context (system user), but the functionalities exposed depend on the specific device. The following capabilities are exposed to zero-permission, third-party apps on the following devices: arbitrary AT command execution via AT command injection (T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, and Boost Mobile Celero 5G); programmatic factory reset (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD), leaking IMEI (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); leaking serial number (Samsung Galaxy A03s, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD); powering off the device (Realme C25Y, Samsung Galaxy A03S, and T-Mobile Revvl 6 Pro 5G); and programmatically enabling/disabling airplane mode (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); and enabling Wi-Fi, Bluetooth, and GPS (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y). No permissions or special privileges are necessary to exploit the vulnerabilities in the com.factory.mmigroup app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V064:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V061:user/release-keys, and Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V052:user/release-keys); Samsung Galaxy A03S (samsung/a03sutfn/a03su:13/TP1A.220624.014/S134DLUDU6CWB6:user/release-keys and samsung/a03sutfn/a03su:12/SP1A.210812.016/S134DLUDS5BWA1:user/release-keys); Lenovo Tab M8 HD (Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300637_220706_BMP:user/release-keys and Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300448_220114_BMP:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys and T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V066:user/release-keys); T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys and T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V060:user/release-keys); and Realme C25Y (realme/RMX3269/RED8F6:11/RP1A.201005.001/1675861640000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1664031768000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1652814687000:user/release-keys, and realme/RMX3269/RED8F6:11/RP1A.201005.001/1635785712000:user/release-keys). This malicious app sends a broadcast Intent to com.factory.mmigroup/.MMIGroupReceiver. This causes the com.factory.mmigroup app to dynamically register for various action strings. The malicious app can then send these strings, allowing it to perform various behaviors that the com.factory.mmigroup app exposes. The actual behaviors exposed by the com.factory.mmigroup app depend on device model and chipset. The com.factory.mmigroup app executes as the "system" user, allowing it to interact with the baseband processor and perform various other sensitive actions. |
| Chef InSpec versions up to 5.23 and before 7.0.107 creates named pipes with overly permissive default Windows access controls. A local attacker may interfere with the pipe connection process and exploit the insufficient access restrictions to assume the InSpec execution context, potentially resulting in elevated privileges or operational disruption.
This issue affects Chef Inspec: through 5.23 and before 7.0.107 |
| A vulnerability was determined in roncoo roncoo-pay up to 9428382af21cd5568319eae7429b7e1d0332ff40. Affected is an unknown function of the file /user/info/lookupList. Executing manipulation can lead to improper authorization. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in Acrel Environmental Monitoring Cloud Platform up to 20250804. This affects an unknown part of the file /NewsManage/UploadNewsImg. The manipulation of the argument File leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An authentication bypass vulnerability in the /web/um_open_telnet.cgi endpoint in Nexxt Solutions NCM-X1800 Mesh Router firmware UV1.2.7 and below, allowing an attacker to remotely enable the Telnet service without authentication, bypassing security controls. The Telnet server is then accessible with hard-coded credentials, allowing attackers to gain administrative shell access and execute arbitrary commands on the device. |
| The Appointment Booking Calendar Plugin and Online Scheduling Plugin – BookingPress plugin for WordPress is vulnerable to authentication bypass in versions 1.1.6 to 1.1.7. This is due to the plugin not properly verifying a user's identity prior to logging them in when completing a booking. This makes it possible for unauthenticated attackers to log in as registered users, including administrators, if they have access to that user's email. This is only exploitable when the 'Auto login user after successful booking' setting is enabled. |
| A vulnerability was found in Provision-ISR SH-4050A-2, SH-4100A-2L(MM), SH-8100A-2L(MM), SH-16200A-2(1U), SH-16200A-5(1U) and NVR5-8200PX up to 20241220. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /server.js. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability classified as problematic was found in Lucky LM-520-SC, LM-520-FSC and LM-520-FSC-SAM up to 20250321. Affected by this vulnerability is an unknown functionality. The manipulation leads to missing authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Symphony process is a module for the Symphony PHP framework which executes commands in sub-processes. When consuming a persisted remember-me cookie, Symfony does not check if the username persisted in the database matches the username attached with the cookie, leading to authentication bypass. This vulnerability is fixed in 5.4.47, 6.4.15, and 7.1.8. |
| Better Auth is an authentication and authorization library for TypeScript. In versions prior to 1.3.26, unauthenticated attackers can create or modify API keys for any user by passing that user's id in the request body to the `api/auth/api-key/create` route. `session?.user ?? (authRequired ? null : { id: ctx.body.userId })`. When no session exists but `userId` is present in the request body, `authRequired` becomes false and the user object is set to the attacker-controlled ID. Server-only field validation only executes when `authRequired` is true (lines 280-295), allowing attackers to set privileged fields. No additional authentication occurs before the database operation, so the malicious payload is accepted. The same pattern exists in the update endpoint. This is a critical authentication bypass enabling full an unauthenticated attacker can generate an API key for any user and immediately gain complete authenticated access. This allows the attacker to perform any action as the victim user using the api key, potentially compromise the user data and the application depending on the victim's privileges. Version 1.3.26 contains a patch for the issue. |
| NATS-Server is a High-Performance server for NATS.io, the cloud and edge native messaging system. In versions starting from 2.2.0 but prior to 2.10.27 and 2.11.1, the management of JetStream assets happens with messages in the $JS. subject namespace in the system account; this is partially exposed into regular accounts to allow account holders to manage their assets. Some of the JS API requests were missing access controls, allowing any user with JS management permissions in any account to perform certain administrative actions on any JS asset in any other account. At least one of the unprotected APIs allows for data destruction. None of the affected APIs allow disclosing stream contents. This vulnerability is fixed in v2.11.1 or v2.10.27. |
| MallChat v1.0-SNAPSHOT has an authentication bypass vulnerability. An attacker can exploit this vulnerability to access API without any token. |
| Tapir is a private Terraform registry. Tapir versions 0.9.0 and 0.9.1 are facing a critical issue with scope-able Deploykeys where attackers can guess the key to get write access to the registry. User must upgrade to 0.9.2. |
| matrix-rust-sdk is an implementation of a Matrix client-server library in Rust. The `UserIdentity::is_verified()` method in the matrix-sdk-crypto crate before version 0.7.2 doesn't take into account the verification status of the user's own identity while performing the check and may as a result return a value contrary to what is implied by its name and documentation. If the method is used to decide whether to perform sensitive operations towards a user identity, a malicious homeserver could manipulate the outcome in order to make the identity appear trusted. This is not a typical usage of the method, which lowers the impact. The method itself is not used inside the `matrix-sdk-crypto` crate. The 0.7.2 release of the `matrix-sdk-crypto` crate includes a fix. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Tauri is a framework for building binaries for all major desktop platforms. Remote origin iFrames in Tauri applications can access the Tauri IPC endpoints without being explicitly allowed in the `dangerousRemoteDomainIpcAccess` in v1 and in the `capabilities` in v2. Valid commands with potentially unwanted consequences ("delete project", "transfer credits", etc.) could be invoked by an attacker that controls the content of an iframe running inside a Tauri app. This vulnerability has been patched in versions 1.6.7 and 2.0.0-beta.19. |
| A tampering vulnerability in the CylanceOPTICS Windows Installer Package of CylanceOPTICS for Windows version 3.2 and 3.3 could allow an attacker to potentially uninstall CylanceOPTICS from a system thereby leaving it with only the protection of CylancePROTECT. |
| Vulnerabilities* in ActADUR local server product, developed and maintained by ProTNS, allows Remote Code Inclusion on host systems.
* vulnerabilities:
*
Improper Neutralization of Special Elements used in a Command ('Command Injection')
* Use of Hard-coded Credentials
* Improper Authentication
* Binding to an Unrestricted IP Address
The vulnerability has been rated as critical.This issue affects ActADUR: from v2.0.1.9 before v2.0.2.0., hence updating to version v2.0.2.0. or above is required. |
| In XLANG OpenAgents through fe73ac4, the allowed_file protection mechanism can be bypassed by using an incorrect file extension for the nature of the file content. |
| matrix-appservice-irc is a Node.js IRC bridge for the Matrix messaging protocol. The fix for GHSA-wm4w-7h2q-3pf7 / CVE-2024-32000 included in matrix-appservice-irc 2.0.0 relied on the Matrix homeserver-provided timestamp to determine whether a user has access to the event they're replying to when determining whether or not to include a truncated version of the original event in the IRC message. Since this value is controlled by external entities, a malicious Matrix homeserver joined to a room in which a matrix-appservice-irc bridge instance (before version 2.0.1) is present can fabricate the timestamp with the intent of tricking the bridge into leaking room messages the homeserver should not have access to. matrix-appservice-irc 2.0.1 drops the reliance on `origin_server_ts` when determining whether or not an event should be visible to a user, instead tracking the event timestamps internally. As a workaround, it's possible to limit the amount of information leaked by setting a reply template that doesn't contain the original message. |
