| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT path
In sev_dbg_crypt(), the per-iteration transfer length is bounded by
the source page offset (PAGE_SIZE - s_off) but not by the destination
page offset (PAGE_SIZE - d_off). When d_off > s_off, the encrypt
path (__sev_dbg_encrypt_user) performs a read-modify-write using a
single-page intermediate buffer (dst_tpage):
1. __sev_dbg_decrypt() expands the size to round_up(len + (d_off & 15), 16)
before issuing the PSP command. If len + (d_off & 15) > PAGE_SIZE,
the PSP writes beyond the end of the 4096-byte dst_tpage allocation.
2. The subsequent memcpy()/copy_from_user() into
page_address(dst_tpage) + (d_off & 15) of 'len' bytes overflows
by up to 15 bytes under the same condition.
Trigger example: s_off = 0, d_off = 1, debug.len = PAGE_SIZE -
the PSP is instructed to write round_up(4097, 16) = 4112 bytes to
a 4096-byte buffer.
Fix by also bounding len by (PAGE_SIZE - d_off), the same check that
sev_send_update_data() already performs for its single-page guest
region.
==================================================================
BUG: KASAN: slab-use-after-free in sev_dbg_crypt+0x993/0xd10 [kvm_amd]
Write of size 4095 at addr ff110062293bb009 by task sev_dbg_test/228214
CPU: 96 UID: 0 PID: 228214 Comm: sev_dbg_test Tainted: G U W 7.0.0-smp--5ce9b0c48211-dbg #156 PREEMPTLAZY
Tainted: [U]=USER, [W]=WARN
Hardware name: Google Astoria/astoria, BIOS 0.20250817.1-0 08/25/2025
Call Trace:
<TASK>
dump_stack_lvl+0x54/0x70
print_report+0xbc/0x260
kasan_report+0xa2/0xd0
kasan_check_range+0x25f/0x2c0
__asan_memcpy+0x40/0x70
sev_dbg_crypt+0x993/0xd10 [kvm_amd]
sev_mem_enc_ioctl+0x33c/0x450 [kvm_amd]
kvm_vm_ioctl+0x65d/0x6d0 [kvm]
__se_sys_ioctl+0xb2/0x100
do_syscall_64+0xe8/0x870
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7fe72b6a0 pfn:0x62293bb
memcg:ff11000112827d82
flags: 0x1400000000000000(node=1|zone=1)
raw: 1400000000000000 0000000000000000 dead000000000122 0000000000000000
raw: 00000007fe72b6a0 0000000000000000 00000001ffffffff ff11000112827d82
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ff110062293bbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff110062293bbf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ff110062293bc000: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ff110062293bc080: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ff110062293bc100: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
[sean: add sample KASAN splat, Fixes, and stable@] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reset write verifier on deferred writeback errors
nfsd_vfs_write() and nfsd_commit() both call filemap_check_wb_err() to
detect deferred writeback errors, but neither rotates the server's write
verifier (nn->writeverf) when this check fails. Every other
durable-storage-failure path in these functions calls
commit_reset_write_verifier() before returning an error.
The missing rotation means clients holding UNSTABLE write data under the
current verifier will COMMIT, receive the unchanged verifier back, and
conclude their data is durable — silently dropping data that failed
writeback. This violates the UNSTABLE+COMMIT durability contract
(RFC 1813 §3.3.7, RFC 8881 §18.32).
Add commit_reset_write_verifier() calls at both filemap_check_wb_err()
error sites, matching the pattern used by adjacent error paths in the
same functions. The helper already filters -EAGAIN and -ESTALE
internally, so the calls are unconditionally safe. |
| In the Linux kernel, the following vulnerability has been resolved:
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
A KASAN null-ptr-deref was observed in vcs_notifier():
BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130
Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {}
The issue is a race condition in vcs_write(). When the console_lock is
temporarily dropped (to copy data from userspace), the vc_data pointer
obtained from vcs_vc() may become stale. After re-acquiring the lock,
vcs_vc() is called again to re-validate the pointer. If the vc has been
deallocated in the meantime, vcs_vc() returns NULL, and the while loop
breaks (with written > 0). However, after the loop, vcs_scr_updated(vc)
is still called with the now-NULL vc pointer, leading to a null pointer
dereference in the notifier chain (vcs_notifier dereferences param->vc).
Fix this by adding a NULL check for vc before calling vcs_scr_updated(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si
syzbot reported a general protection fault in
vidtv_psi_ts_psi_write_into [1].
vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does
not check for this before dereferencing the returned pointer to access
the continuity counter. This leads to a general protection fault when
accessing a near-NULL address.
The root cause is that vidtv_mux_pid_ctx_init() does not check the
return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs.
If the allocation fails, the PID context is never created, but init
returns success. The subsequent vidtv_mux_push_si() call then gets
NULL from vidtv_mux_get_pid_ctx() and crashes.
Fix both the root cause (add error check in vidtv_mux_pid_ctx_init
for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for
all vidtv_mux_get_pid_ctx() calls.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events vidtv_mux_tick
RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197
Call Trace:
<TASK>
vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline]
vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231
vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196
vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408 |
| Cleartext Transmission of Sensitive Information, Insufficiently Protected Credentials vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android (Address book sync, Heartbeat sync loop modules) allows Sniffing Attacks.
The client places the preset address-book password verbatim into the heartbeat sync JSON body (src/hbbs_http/sync.rs). Over an intact HTTPS session it is not exposed in transit, but it is a reusable shared secret rather than a zero-knowledge proof, so it is recovered by any party that becomes the API endpoint - under the re-homed/rogue API server (CVE-2026-30797) - and the leaked credential then authorizes the server-side address book.
This vulnerability is associated with program files src/hbbs_http/sync.rs and program routines heartbeat sync body builder (emits preset-address-book-password).
This issue affects RustDesk Client: through 1.4.8. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov8856: free control handler on error in ov8856_init_controls()
The control handler wasn't freed if adding controls failed, add an error
exit label and convert the existing error return to use it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/colorop: Fix blob property reference tracking in state lifecycle
The colorop state blob property handling had memory leaks during state
duplication, destruction, and reset operations. The implementation
failed to follow the established pattern from drm_crtc's handling of
DEGAMMA/GAMMA blob properties.
Issues fixed:
- drm_colorop_atomic_destroy_state() was freeing state memory without
releasing the blob reference, causing a leak
- drm_colorop_reset() was directly freeing old state with kfree()
instead of properly destroying it, leaking blob references
- drm_colorop_cleanup() had duplicate blob cleanup code
Changes:
- Add __drm_atomic_helper_colorop_destroy_state() helper to properly
release blob references before freeing state memory
- Update drm_colorop_atomic_destroy_state() to call the helper
- Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state()
for proper cleanup of old state
- Simplify drm_colorop_cleanup() to use the common destruction path
This matches the well-tested pattern used by drm_crtc since 2016 and
ensures proper reference counting throughout the state lifecycle.
Co-developed by Claude Sonnet 4.5. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
Kernel lacks dirty tracking support on nested domain attached to PASID,
fails the attachment early if nesting parent domain is dirty tracking
configured, otherwise dirty pages would be lost. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: bound node_desc sysfs read with %.64s
node_desc[64] in struct ib_device is not guaranteed to be NUL-
terminated. The core IB sysfs handler uses "%.64s" for exactly this
reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store()
performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL
termination:
memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX));
If exactly 64 bytes are written via the node_desc sysfs file, the array
contains no NUL byte. The ionic hca_type_show() handler uses unbounded
"%s" and will read past the end of node_desc into adjacent fields of
struct ib_device until it encounters a NUL.
ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by
userspace.
Match the core handler and bound the format specifier. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Improve validation and configuration of ACR masks
Currently there are several issues on the user space ACR mask validation
and configuration.
- The validation for user space ACR mask (attr.config2) is incomplete,
e.g., the ACR mask could include the index which belongs to another
ACR events group, but it's not validated.
- An early return on an invalid ACR mask caused all subsequent ACR groups
to be skipped.
- The stale hardware ACR mask (hw.config1) is not cleared before setting
new hardware ACR mask.
The following changes address all of the above issues.
- Figure out the event index group of an ACR group. Any bits in the
user-space mask not present in the index group are now dropped.
- Instead of an early return on invalid bits, drop only the invalid
portions and continue iterating through all ACR events to ensure full
configuration.
- Explicitly clear the stale hardware ACR mask for each event prior to
writing the new configuration.
Besides, a non-leader event member of ACR group could be disabled in
theory. This could cause bit-shifting errors in the acr_mask of remaining
group members. But since ACR sampling requires all events to be active,
this should not be a big concern in real use case. Add a "FIXME" comment
to notice this risk. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix avdcache auditing
The per-task avdcache was incorrectly saving and reusing the
audited vector computed by avc_audit_required() rather than
recomputing based on the currently requested permissions and
distinguishing the denied versus allowed cases. As a result,
some permission checks were not being audited, e.g.
directory write checks after a previously cached directory
search check.
[PM: line wrap tweaks] |
| libnfs through 6.0.2 before 55c18ea does not validate a string size, leading to an integer overflow during a connection to a crafted NFS server. This occurs in libnfs_zdr_string in lib/libnfs-zdr.c. |
| A vulnerability was determined in SourceCodester Class and Exam Timetabling System 1.0/1.php. Affected by this vulnerability is an unknown functionality of the file /edit_room1.php. Executing a manipulation of the argument ID can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was identified in nearai ironclaw up to 0.29.1. The affected element is the function validate_path of the file src/tools/builtin/path_utils.rs of the component write_file. The manipulation leads to link following. Local access is required to approach this attack. The exploit is publicly available and might be used. The identifier of the patch is 369ff3d240cf3c0787b50e1e9f182e1a06c71255. It is recommended to apply a patch to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: fix generic IRQ chip leak on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe. However, on driver
remove/teardown, the generic chips are not automatically freed when the
IRQ domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on
the global gc_list and may later be visited by generic IRQ chip suspend,
resume, or shutdown callbacks after the GPIO bank has been removed,
potentially resulting in a use-after-free and kernel crash.
Fix the resource leak by explicitly calling
irq_domain_remove_generic_chips() before removing the IRQ domain in
rockchip_gpio_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked()
When a compressed or sparse attribute has its clusters frame-aligned,
vcn is rounded down to the frame start using cmask, which can result
in vcn != vcn0. In this case, vcn and vcn0 may reside in different
attribute segments.
The code already handles the case where vcn is in a different segment
by loading its runs before allocation. However, it fails to load runs
for vcn0 when vcn0 resides in a different segment than vcn. This causes
run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was
never loaded into the in-memory run list, triggering the WARN_ON(1).
Fix this by adding a missing check for vcn0 after the existing vcn
segment check. If vcn0 falls outside the current segment range
[svcn, evcn1), find and load the attribute segment containing vcn0
before performing the run lookup.
The following scenario triggers the bug:
attr_data_get_block_locked()
vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment
load runs for vcn segment <- vcn0 segment not loaded!
attr_allocate_clusters() <- allocation succeeds
run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN
WARN_ON(1) <- bug fires here! |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: take vmap_purge_lock in shrinker
decay_va_pool_node() can be invoked concurrently from two paths:
__purge_vmap_area_lazy() when pools are being purged, and the shrinker via
vmap_node_shrink_scan().
However, decay_va_pool_node() is not safe to run concurrently, and the
shrinker path currently lacks serialization, leading to races and possible
leaks.
Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker
path to ensure serialization with purge users. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix race condition during PASID entry replacement
The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing
an active PASID entry (e.g., during domain replacement), the current
implementation calculates a new entry on the stack and copies it to the
table using a single structure assignment.
struct pasid_entry *pte, new_pte;
pte = intel_pasid_get_entry(dev, pasid);
pasid_pte_config_first_level(iommu, &new_pte, ...);
*pte = new_pte;
Because the hardware may fetch the 512-bit PASID entry in multiple
128-bit chunks, updating the entire entry while it is active (Present
bit set) risks a "torn" read. In this scenario, the IOMMU hardware
could observe an inconsistent state — partially new data and partially
old data — leading to unpredictable behavior or spurious faults.
Fix this by removing the unsafe "replace" helpers and following the
"clear-then-update" flow, which ensures the Present bit is cleared and
the required invalidation handshake is completed before the new
configuration is applied. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix queue freeze vs limits lock order in sysfs store methods
queue_attr_store() always freezes a device queue before calling the
attribute store operation. For attributes that control queue limits, the
store operation will also lock the queue limits with a call to
queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may
need to issue commands to a device to obtain limit values from the
hardware with the queue limits locked. This creates a potential ABBA
deadlock situation if a user attempts to modify a limit (thus freezing
the device queue) while the device driver starts a revalidation of the
device queue limits.
Avoid such deadlock by not freezing the queue before calling the
->store_limit() method in struct queue_sysfs_entry and instead use the
queue_limits_commit_update_frozen helper to freeze the queue after taking
the limits lock.
This also removes taking the sysfs lock for the store_limit method as
it doesn't protect anything here, but creates even more nesting.
Hopefully it will go away from the actual sysfs methods entirely soon.
(commit log adapted from a similar patch from Damien Le Moal) |
| SurrealDB before 2.0.5, 2.1.x before 2.1.5, and 2.2.x before 2.2.2 allows authenticated users with OWNER or EDITOR permissions (at the root, namespace, or database level) to define custom database functions via DEFINE FUNCTION using nested FOR loops. Although a single loop's iteration count is constrained, nesting multiple loops (e.g., each with 1,000,000 iterations) is not, so an attacker can execute a function that consumes all server CPU time. Configured timeouts do not stop the execution, rendering the server unresponsive to other queries and connections until it is manually restarted. |
