| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nstree: tighten permission checks for listing
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix starvation of scx_enable() under fair-class saturation
During scx_enable(), the READY -> ENABLED task switching loop changes the
calling thread's sched_class from fair to ext. Since fair has higher
priority than ext, saturating fair-class workloads can indefinitely starve
the enable thread, hanging the system. This was introduced when the enable
path switched from preempt_disable() to scx_bypass() which doesn't protect
against fair-class starvation. Note that the original preempt_disable()
protection wasn't complete either - in partial switch modes, the calling
thread could still be starved after preempt_enable() as it may have been
switched to ext class.
Fix it by offloading the enable body to a dedicated system-wide RT
(SCHED_FIFO) kthread which cannot be starved by either fair or ext class
tasks. scx_enable() lazily creates the kthread on first use and passes the
ops pointer through a struct scx_enable_cmd containing the kthread_work,
then synchronously waits for completion.
The workfn runs on a different kthread from sch->helper (which runs
disable_work), so it can safely flush disable_work on the error path
without deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit().
nfsd_nl_listener_set_doit() uses get_current_cred() without
put_cred().
As we can see from other callers, svc_xprt_create_from_sa()
does not require the extra refcount.
nfsd_nl_listener_set_doit() is always in the process context,
sendmsg(), and current->cred does not go away.
Let's use current_cred() in nfsd_nl_listener_set_doit(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Cleanup partially initialized sync on parse failure
xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
(cherry picked from commit f939bdd9207a5d1fc55cced5459858480686ce22) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Fix user fence leak on alloc failure
When dma_fence_chain_alloc() fails, properly release the user fence
reference to prevent a memory leak.
(cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: Fix memory leak in error path
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration. |
| The optional extension component TinkerpopClientService is missing the Restricted annotation with the Execute Code Required Permission in Apache NiFi 2.0.0-M1 through 2.8.0. The TinkerpopClientService supports configuration of ByteCode Submission for the Script Submission Type, enabling Groovy Script execution in the service prior to submitting the query. The missing Restricted annotation allows users without the Execute Code Permission to configure the Service in installations that use fine-grained authorization and have the optional TinkerpopClientService installed. Apache NiFi installations that do not have the nifi-other-graph-services-nar installed are not subject to this vulnerability. Upgrading to Apache NiFi 2.9.0 is the recommended mitigation. |
| The Optoma CinemaX P2 projector (firmware TVOS-04.24.010.04.01, Android 8.0.0) exposes Android Debug Bridge (ADB) on TCP port 5555 over the network without requiring authentication. The device is configured with ro.adb.secure=0, which disables RSA key verification. Additionally, a functional su binary exists at /system/xbin/su that grants root privileges without authentication. An attacker on the same network can connect to the device via ADB, obtain a shell, and escalate to root privileges, gaining complete control of the device. This allows extraction of stored WiFi credentials, installation of persistent malware, and access to all device data. |
| NPM package next-npm-version1.0.1 is vulnerable to Command injection. |
| Sidekiq-cron thru 2.3.1, an open-source scheduling add-on for Sidekiq, is vulnerable to a cross-site scripting (xss) vulnerability via crafted URL being rended from cron.erb. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: restore failed global reservations to subpool
Commit a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool")
fixed an underflow error for hstate->resv_huge_pages caused by incorrectly
attributing globally requested pages to the subpool's reservation.
Unfortunately, this fix also introduced the opposite problem, which would
leave spool->used_hpages elevated if the globally requested pages could
not be acquired. This is because while a subpool's reserve pages only
accounts for what is requested and allocated from the subpool, its "used"
counter keeps track of what is consumed in total, both from the subpool
and globally. Thus, we need to adjust spool->used_hpages in the other
direction, and make sure that globally requested pages are uncharged from
the subpool's used counter.
Each failed allocation attempt increments the used_hpages counter by how
many pages were requested from the global pool. Ultimately, this renders
the subpool unusable, as used_hpages approaches the max limit.
The issue can be reproduced as follows:
1. Allocate 4 hugetlb pages
2. Create a hugetlb mount with max=4, min=2
3. Consume 2 pages globally
4. Request 3 pages from the subpool (2 from subpool + 1 from global)
4.1 hugepage_subpool_get_pages(spool, 3) succeeds.
used_hpages += 3
4.2 hugetlb_acct_memory(h, 1) fails: no global pages left
used_hpages -= 2
5. Subpool now has used_hpages = 1, despite not being able to
successfully allocate any hugepages. It believes it can now only
allocate 3 more hugepages, not 4.
With each failed allocation attempt incrementing the used counter, the
subpool eventually reaches a point where its used counter equals its
max counter. At that point, any future allocations that try to
allocate hugeTLB pages from the subpool will fail, despite the subpool
not having any of its hugeTLB pages consumed by any user.
Once this happens, there is no way to make the subpool usable again,
since there is no way to decrement the used counter as no process is
really consuming the hugeTLB pages.
The underflow issue that the original commit fixes still remains fixed
as well.
Without this fix, used_hpages would keep on leaking if
hugetlb_acct_memory() fails. |
| The Optoma CinemaX P2 projector (firmware TVOS-04.24.010.04.01, Android 8.0.0) exposes an HTTP API on TCP port 2345 that allows full unauthenticated remote control of the device. The API supports both reading configuration (74 endpoints) and writing/modifying settings including volume, mute, brightness, power, network protocols enable/disable (including TELNET), display modes, and other projector functions. Any device on the same network can control the projector without authentication. |
| npm package parse-ini v1.0.6 is vulnerable to Prototype Pollution in index.js(). |
| ZEBRA is a Zcash node written entirely in Rust. Prior to zebrad version 4.3.1 and prior to zebra-script version 5.0.2, after a refactoring, Zebra failed to validate a consensus rule that restricted the possible values of sighash hash types for V5 transactions which were enabled in the NU5 network upgrade. Zebra nodes could thus accept and eventually mine a block that would be considered invalid by zcashd nodes, creating a consensus split between Zebra and zcashd nodes. In a similar vein, for V4 transactions, Zebra mistakenly used the "canonical" hash type when computing the sighash while zcashd (correctly per the spec) uses the raw value, which could also crate a consensus split. This issue has been patched in zebrad version 4.3.1 and zebra-script version 5.0.2. |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.37, the _safe_extractall helper that all recipe pull, recipe publish, and recipe unpack flows route through validates each archive member's name for absolute paths, .. segments, and resolved-path escape — but does not validate member.linkname, does not reject symlink/hardlink members, and calls tar.extractall(dest_dir) without filter="data". A bundle that contains a symlink with a name inside dest_dir but a linkname pointing outside it, followed by a regular file whose path traverses through the just-created symlink, escapes dest_dir and lets the attacker write arbitrary content to an attacker-chosen location on the victim's filesystem. This issue has been patched in version 4.6.37. |
| Insufficient policy enforcement in WebUI in Google Chrome on Linux, Mac, Windows, ChromeOS prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| Brave CMS is an open-source CMS. Prior to commit 6c56603, page and article body content entered through the CKEditor rich-text editor is stored verbatim in the database and subsequently rendered with Laravel Blade's unescaped output directive {!! !!}. Any JavaScript or HTML injected by an editor-role user is permanently stored and executed in every visitor's browser upon page load. This issue has been patched via commit 6c56603. |
| ZEBRA is a Zcash node written entirely in Rust. Prior to version 4.4.0, a composite denial-of-service vulnerability in Zebra's block discovery pipeline allows an unauthenticated remote attacker to permanently halt all new block discovery on a targeted node. The attack exploits three independent weaknesses in the gossip, syncer, and download subsystems — all exercisable from a single TCP connection — to create a monotonically growing block deficit that never self-heals. This issue has been patched in version 4.4.0. |
| Emlog is an open source website building system. Prior to version 2.6.11, insecure plugin upload functionality allows attackers to upload and execute arbitrary PHP code, leading to complete server compromise and persistent backdoor installation. This issue has been patched in version 2.6.11. |
| PraisonAI is a multi-agent teams system. From version 4.5.139 to before version 4.6.32, CVE-2026-40287's fix gated tools.py auto-import behind PRAISONAI_ALLOW_LOCAL_TOOLS=true in two files (tool_resolver.py, api/call.py). A third import sink in praisonai/templates/tool_override.py was missed and remains unguarded. It is reached by the recipe runner on every recipe execution and is remotely triggerable through POST /v1/recipes/run with a recipe value pointing at any local absolute path or any GitHub repo (because SecurityConfig.allow_any_github defaults to True). The attacker drops a tools.py next to TEMPLATE.yaml; the server exec_module()s it. No auth required by default, no environment opt-in required. This issue has been patched in version 4.6.32. |
