| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Parsing a WEBP image with an invalid, large size panics on 32-bit platforms. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_charset_module module. When charset, source_charset, and charset_map and proxy_pass with disabled buffering ("off") directives are configured, unauthenticated attackers can send requests that with conditions beyond the attackers' control to cause a heap buffer over-read in the NGINX worker process, leading to limited disclosure of memory or a restart.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability exists in BIG-IP systems that may allow an authenticated attacker with administrative access to escalate their privileges. A successful exploit may allow the attacker to cross a security boundary.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From version 1.80.5 to before version 1.83.7, the POST /prompts/test endpoint accepted user-supplied prompt templates and rendered them without sandboxing. A crafted template could run arbitrary code inside the LiteLLM Proxy process. The endpoint only checks that the caller presents a valid proxy API key, so any authenticated user could reach it. Depending on how the proxy is deployed, this could expose secrets in the process environment (such as provider API keys or database credentials) and allow commands to be run on the host. This issue has been patched in version 1.83.7. |
| jq is a command-line JSON processor. In 1.8.1 and earlier, jq accepts embedded NUL bytes in import paths at the jq-language level, but later resolves those paths through C string operations during module and data-file lookup. This creates a mismatch between the logical import string that policy or audit code may validate and the on-disk path that jq actually opens. |
| jq is a command-line JSON processor. In 1.8.1 and earlier, when decNumberFromString is given a number literal of INT_MAX-1 (2147483646) digits, the D2U() macro overflows during signed-int arithmetic. The wrapped negative value bypasses the heap-allocation size check, causes the function to use a 30-byte stack buffer, and then writes ≈715 million 16-bit units (≈1.4 GiB) at an offset 1.43 GiB below the stack frame. The written content is fully attacker-controlled (the parsed decimal digits, packed 3-per-unit). |
| jq is a command-line JSON processor. In 1.8.1 and earlier, the jq bytecode VM's data stack tracks its allocation size in a signed int. When the stack grows beyond ≈1 GiB (via deeply nested generator forks), the doubling arithmetic overflows. The wrapped value is passed to realloc and then used for a memmove with attacker-influenced offsets. |
| jq is a command-line JSON processor. In 1.8.1 and earlier, Top-level jq programs loaded from a file with -f are truncated at the first embedded NUL byte on current upstream HEAD. A crafted filter file such as . followed by \x00 and arbitrary suffix compiles and executes as only the prefix before the NUL. This leaves jq with a post-CVE-2026-33948 prefix/full-buffer mismatch on the compilation path even though the JSON parser path has already been fixed. |
| When a BIG-IP APM access policy is configured on a virtual server, undisclosed traffic can cause the apmd process to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Stirling-PDF is a locally hosted web application that facilitates various operations on PDF files. In versions prior to 2.0.0, file upload endpoints render user-supplied filenames directly into HTML using unsafe methods like innerHTML without sanitization. An attacker can craft a file with a malicious filename containing JavaScript that executes in the uploading user's browser context, resulting in reflected XSS. The issue affects numerous upload endpoints across the application. The issue has been fixed in version 2.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix 22000 series SMEM parsing
If the firmware were to report three LMACs (which doesn't
exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is
an overrun of the array. Reject such and use IWL_FW_CHECK
instead of WARN_ON in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
EFI/CPER: don't dump the entire memory region
The current logic at cper_print_fw_err() doesn't check if the
error record length is big enough to handle offset. On a bad firmware,
if the ofset is above the actual record, length -= offset will
underflow, making it dump the entire memory.
The end result can be:
- the logic taking a lot of time dumping large regions of memory;
- data disclosure due to the memory dumps;
- an OOPS, if it tries to dump an unmapped memory region.
Fix it by checking if the section length is too small before doing
a hex dump.
[ rjw: Subject tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/buddy: Prevent BUG_ON by validating rounded allocation
When DRM_BUDDY_CONTIGUOUS_ALLOCATION is set, the requested size is
rounded up to the next power-of-two via roundup_pow_of_two().
Similarly, for non-contiguous allocations with large min_block_size,
the size is aligned up via round_up(). Both operations can produce a
rounded size that exceeds mm->size, which later triggers
BUG_ON(order > mm->max_order).
Example scenarios:
- 9G CONTIGUOUS allocation on 10G VRAM memory:
roundup_pow_of_two(9G) = 16G > 10G
- 9G allocation with 8G min_block_size on 10G VRAM memory:
round_up(9G, 8G) = 16G > 10G
Fix this by checking the rounded size against mm->size. For
non-contiguous or range allocations where size > mm->size is invalid,
return -EINVAL immediately. For contiguous allocations without range
restrictions, allow the request to fall through to the existing
__alloc_contig_try_harder() fallback.
This ensures invalid user input returns an error or uses the fallback
path instead of hitting BUG_ON.
v2: (Matt A)
- Add Fixes, Cc stable, and Closes tags for context |
| A vulnerability was determined in Squirrel up to 3.2. This affects the function SQFunctionProto::Load of the file squirrel/sqobject.cpp. This manipulation causes heap-based buffer overflow. The attack is restricted to local execution. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| Hitachi Vantara Pentaho Data Integration & Analytics of all versions contain a JDBC driver for H2 databases which is vulnerable to external script execution when a new connection is created by a data source administrator. |
| multiparty@4.2.3 and lower versions are vulnerable to denial of service via regular expression backtracking in the Content-Disposition filename parameter parser. A crafted multipart upload with a long header value can cause regex matching to take seconds, blocking the event loop. Impact: any service accepting multipart uploads via multiparty is affected. Workarounds: limiting upload sizes at the proxy or gateway layer reduces but does not eliminate the attack surface, since a small header of around 8 KB is sufficient to trigger the vulnerable backtracking. Upgrade to multiparty@4.3.0 or higher. |
| multiparty@4.2.3 and lower versions are vulnerable to denial of service via uncaught exception. By sending a multipart/form-data request with a field name that collides with an inherited Object.prototype property such as __proto__, constructor, or toString, the parser invokes .push() on the inherited prototype value rather than an array, throwing a TypeError that propagates as an uncaught exception and crashes the process. Impact: any service accepting multipart uploads via multiparty is affected. Workarounds: none. Upgrade to multiparty@4.3.0 or higher. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. Processing an audio stream in a maliciously crafted media file may terminate the process. |
| Microdot is a minimalistic Python web framework. Prior to 2.6.1, the Response.set_cookie() method does not sanitize its string arguments, and in particular will not detect the presence of the \r\n sequence in them. This can be a potential source of header injection attacks. For a header injection attack through this issue to be possible, an attacker must first infiltrate the client (for example through an independent XSS attack), so that it can send malicious information that is destined to be stored in a cookie by the server on behalf of the victim. An attacker that infiltrates one client can only orchestrate a header injection attack for that client, all other clients that were not infiltrated are safe. This vulnerability is fixed in 2.6.1. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5. Processing a maliciously crafted image may corrupt process memory. |
