| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync()
When a dpll_pin is shared across multiple dpll_device instances and
those devices are being unregistered (e.g. during driver module removal),
a NULL pointer dereference can occur in dpll_msg_add_pin_ref_sync().
This happens under the following conditions:
- A pin is registered with two or more dpll devices (dpll_A, dpll_B)
- The pin has ref_sync pairs with other pins
- During unregistration of dpll_A's pins, a ref_sync partner pin is
unregistered first, removing it from dpll_A->pin_refs
- But since the partner pin is still registered with dpll_B, its
dpll_refs is not empty, so dpll_pin_ref_sync_pair_del() does NOT
run and the partner stays in the pin's ref_sync_pins xarray
- When the pin itself is then unregistered from dpll_A, the delete
notification calls dpll_msg_add_pin_ref_sync() which finds the
partner in ref_sync_pins, passes dpll_pin_available() (partner is
still registered with dpll_B), but dpll_pin_on_dpll_priv(dpll_A,
partner) returns NULL because partner was already removed from
dpll_A->pin_refs
- The NULL priv pointer is passed to the driver's ref_sync_get
callback, which dereferences it
BUG: kernel NULL pointer dereference, address: 0000000000000034
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:zl3073x_dpll_input_pin_ref_sync_get+0x73/0x80 [zl3073x]
Call Trace:
dpll_msg_add_pin_ref_sync+0xb8/0x200
dpll_cmd_pin_get_one+0x3b6/0x4b0
dpll_pin_event_send+0x72/0x140
__dpll_pin_unregister+0x5a/0x2b0
dpll_pin_unregister+0x49/0x70
Fix this by skipping ref_sync pins whose priv pointer cannot be resolved
for the current dpll device. |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 unauthenticated remote code execution was possible via the agent polling protocol |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: guard HE capability lookups
mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after
checking HE support, then dereference the HE PHY capability returned by
mt76_connac_get_he_phy_cap(). That helper can return NULL when no
capability entry matches the vif type.
Fetch the capability before appending the TLV and skip the HE-specific
setup when no matching capability is available. |
| The WP Statistics WordPress plugin before 14.16.10 does not perform a capability check on a set of dashboard analytics AJAX handlers, relying only on a nonce that every authenticated user holds, allowing users with Subscriber-level access and above to disclose the site's visitor analytics data. |
| The Contact Form to Any API WordPress plugin before 3.0.7 does not use a random filename when copying files uploaded through contact forms into a publicly accessible directory, allowing unauthenticated attackers to enumerate and download files submitted by other users. |
| Authorization bypass in SemClipboardService prior to SMR Aug-2026 Release 1 allows local attackers to access clipboard data. |
| Improper export of android application components in AppLock prior to SMR Aug-2026 Release 1 allows physical attackers to bypass app lock function. |
| Incorrect authorization in Samsung Health prior to version 7.0.0 allows local attackers to access sensitive information. |
| Relative path traversal in Samsung Health prior to version 7.0.0 allows local attackers to access sensitive information. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin
In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set
unconditionally even when ath11k_core_qmi_firmware_ready() fails.
This leaves the driver in an inconsistent state where
initialization is considered complete although the firmware ready
handling did not finish successfully. During the subsequent SSR,
the driver enters the restart path based on this incorrect state
and dereferences uninitialized srng members, resulting in a NULL
pointer dereference.
Call trace:
ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P)
ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k]
ath11k_core_restart+0x40/0x168 [ath11k]
Fix this by:
- skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set
- setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds
- setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling
on error
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject redirect helpers without a bpf_net_context
The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task
bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the
current->bpf_net_context unconditionally. That context is established
on the paths that run tc BPF such as sch_handle_{ingress,egress}(),
*except* for the case where {cls,act}_bpf was attached to a proper
qdisc. A program running from there reaches the NULL deref in two ways:
* It calls bpf_redirect() directly, which dereferences the context at
the top of the helper:
tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \
avpkt 1000 burst 100 qevent early_drop block 10
tc filter add block 10 pref 1 bpf obj redirect.o
* It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle()
then dispatches to skb_do_redirect(), which dereferences the context
Rather than extending bpf_net_context management into the qdisc path,
make the redirect helpers refuse to operate when no context exists, and
have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of
calling skb_do_redirect(). Previous behaviour was a crash, so nothing
regresses by not supporting it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: validate Realtek vendor event length
btusb_recv_event_realtek() reads the event code at data[0] and the Realtek
subevent code at data[2] before deciding whether to consume a vendor event
as a coredump.
For example, the two-byte event ff 00 contains a complete vendor-event
header declaring zero parameters. The old classifier still reads a
nonexistent third byte and can misclassify the event as a coredump if the
adjacent byte is 0x34.
Require the HCI event header and first parameter to be present before
inspecting the Realtek subevent code. Short events continue through the
normal HCI receive path, which owns their protocol validation. |
| The YMC Filter WordPress plugin before 3.12.8 does not sanitize and escape a layout builder setting before outputting it on a public endpoint, and does not verify object ownership when the setting is saved, allowing users with the Contributor role and above to store JavaScript that executes in the browser of any visitor viewing an affected filter. |
| The WP Directory Kit WordPress plugin before 1.5.5 does not perform authorization or nonce checks on one of its authenticated AJAX actions, allowing any authenticated user such as a Subscriber to disclose the WP Directory Kit WordPress plugin before 1.5.5 settings including sensitive API keys and secrets. |
| In the Linux kernel, the following vulnerability has been resolved:
arm_mpam: guard MBWU state before adding it to garbage
__destroy_component_cfg() adds each RIS mbwu_state object to the MPAM
garbage list when destroying component configuration.
However, mbwu_state is allocated per RIS and only for RISes with MBWU
monitors. A component can therefore have comp->cfg allocated while some
RISes still have ris->mbwu_state set to NULL.
Passing a NULL mbwu_state to add_to_garbage() dereferences the NULL
pointer inside the macro.
Skip RISes that do not have an mbwu_state object before adding them to
the garbage list. |
| Consul Community Edition and Consul Enterprise 1.18.21 through 2.0.2 are vulnerable to a partial arbitrary file read when configured to use the Vault Connect CA provider with JWT or AppRole authentication. A privileged attacker with `operator:write` permission may direct Consul to read and forward credential files outside the intended scope, potentially leading to the exfiltration of sensitive secrets from the Consul server host. This vulnerability, CVE-2026-19017, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| The WP Directory Kit WordPress plugin before 1.5.5 does not perform authorization or nonce checks on one of its authenticated AJAX actions, allowing any authenticated user such as a Subscriber to disclose the site's user list and unpublished listings belonging to other users. |
| The GeoDirectory WordPress plugin before 2.8.169 does not perform any authorization check when returning map marker data for a single requested listing, allowing unauthenticated users to disclose the title and exact geographic coordinates of non-public (pending or draft) listings. |
| The WP Data Access WordPress plugin before 5.5.79 does not validate the column names it accepts on one of its unauthenticated AJAX actions, and the nonce guarding that action does not cover them, allowing unauthenticated attackers to read arbitrary columns of the database table the affected front-end form is bound to, including user password hashes where that table is the users table. |
