Export limit exceeded: 377274 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (377274 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-21082 | 1 Samsung Mobile | 1 Samsung Health | 2026-08-10 | N/A |
| Relative path traversal in Samsung Health prior to version 7.0.0 allows local attackers to access sensitive information. | ||||
| CVE-2026-68362 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set unconditionally even when ath11k_core_qmi_firmware_ready() fails. This leaves the driver in an inconsistent state where initialization is considered complete although the firmware ready handling did not finish successfully. During the subsequent SSR, the driver enters the restart path based on this incorrect state and dereferences uninitialized srng members, resulting in a NULL pointer dereference. Call trace: ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P) ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k] ath11k_core_restart+0x40/0x168 [ath11k] Fix this by: - skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set - setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds - setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling on error Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1 | ||||
| CVE-2026-68337 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject redirect helpers without a bpf_net_context The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the current->bpf_net_context unconditionally. That context is established on the paths that run tc BPF such as sch_handle_{ingress,egress}(), *except* for the case where {cls,act}_bpf was attached to a proper qdisc. A program running from there reaches the NULL deref in two ways: * It calls bpf_redirect() directly, which dereferences the context at the top of the helper: tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \ avpkt 1000 burst 100 qevent early_drop block 10 tc filter add block 10 pref 1 bpf obj redirect.o * It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle() then dispatches to skb_do_redirect(), which dereferences the context Rather than extending bpf_net_context management into the qdisc path, make the redirect helpers refuse to operate when no context exists, and have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of calling skb_do_redirect(). Previous behaviour was a crash, so nothing regresses by not supporting it. | ||||
| CVE-2026-68339 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: validate Realtek vendor event length btusb_recv_event_realtek() reads the event code at data[0] and the Realtek subevent code at data[2] before deciding whether to consume a vendor event as a coredump. For example, the two-byte event ff 00 contains a complete vendor-event header declaring zero parameters. The old classifier still reads a nonexistent third byte and can misclassify the event as a coredump if the adjacent byte is 0x34. Require the HCI event header and first parameter to be present before inspecting the Realtek subevent code. Short events continue through the normal HCI receive path, which owns their protocol validation. | ||||
| CVE-2026-16558 | 2 Wordpress, Ymc Filter | 2 Wordpress, Ymc Filter | 2026-08-10 | 5.4 Medium |
| The YMC Filter WordPress plugin before 3.12.8 does not sanitize and escape a layout builder setting before outputting it on a public endpoint, and does not verify object ownership when the setting is saved, allowing users with the Contributor role and above to store JavaScript that executes in the browser of any visitor viewing an affected filter. | ||||
| CVE-2026-16594 | 2 Wordpress, Wpdirectorykit | 2 Wordpress, Wp Directory Kit | 2026-08-10 | 7.5 High |
| The WP Directory Kit WordPress plugin before 1.5.5 does not perform authorization or nonce checks on one of its authenticated AJAX actions, allowing any authenticated user such as a Subscriber to disclose the WP Directory Kit WordPress plugin before 1.5.5 settings including sensitive API keys and secrets. | ||||
| CVE-2026-68345 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm_mpam: guard MBWU state before adding it to garbage __destroy_component_cfg() adds each RIS mbwu_state object to the MPAM garbage list when destroying component configuration. However, mbwu_state is allocated per RIS and only for RISes with MBWU monitors. A component can therefore have comp->cfg allocated while some RISes still have ris->mbwu_state set to NULL. Passing a NULL mbwu_state to add_to_garbage() dereferences the NULL pointer inside the macro. Skip RISes that do not have an mbwu_state object before adding them to the garbage list. | ||||
| CVE-2026-19017 | 1 Hashicorp | 2 Consul, Consul Enterprise | 2026-08-10 | 6.8 Medium |
| Consul Community Edition and Consul Enterprise 1.18.21 through 2.0.2 are vulnerable to a partial arbitrary file read when configured to use the Vault Connect CA provider with JWT or AppRole authentication. A privileged attacker with `operator:write` permission may direct Consul to read and forward credential files outside the intended scope, potentially leading to the exfiltration of sensitive secrets from the Consul server host. This vulnerability, CVE-2026-19017, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. | ||||
| CVE-2026-16595 | 2 Wordpress, Wpdirectorykit | 2 Wordpress, Wp Directory Kit | 2026-08-10 | 6.5 Medium |
| The WP Directory Kit WordPress plugin before 1.5.5 does not perform authorization or nonce checks on one of its authenticated AJAX actions, allowing any authenticated user such as a Subscriber to disclose the site's user list and unpublished listings belonging to other users. | ||||
| CVE-2026-16988 | 2026-08-10 | 7.5 High | ||
| The GeoDirectory WordPress plugin before 2.8.169 does not perform any authorization check when returning map marker data for a single requested listing, allowing unauthenticated users to disclose the title and exact geographic coordinates of non-public (pending or draft) listings. | ||||
| CVE-2026-18032 | 2026-08-10 | 7.5 High | ||
| The WP Data Access WordPress plugin before 5.5.79 does not validate the column names it accepts on one of its unauthenticated AJAX actions, and the nonce guarding that action does not cover them, allowing unauthenticated attackers to read arbitrary columns of the database table the affected front-end form is bound to, including user password hashes where that table is the users table. | ||||
| CVE-2026-18465 | 2 Wordpress, Wp Maps Pro | 2 Wordpress, Wp Maps Pro | 2026-08-10 | 6.5 Medium |
| The WP MAPS PRO WordPress plugin before 6.1.3 does not perform a capability check in one of its AJAX actions, which is also available to unauthenticated users, and does not properly validate a user-controlled path before using it in a file inclusion, allowing unauthenticated attackers to include and execute arbitrary existing local PHP files on the server. | ||||
| CVE-2026-14206 | 2026-08-10 | 7.5 High | ||
| The HT Contact Form WordPress plugin before 2.9.3 does not perform any authorization check on the endpoint that returns a saved form draft, allowing unauthenticated users to read the personal data (name, email, phone, address) stored in form drafts. | ||||
| CVE-2026-68336 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix devconf_all NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the devconf_all is never initialized because inet6_init() exits before addrconf_init() is called which initializes it. bond_send_validate(), however, will still call bond_ns_send_all() even ipv6 is indeed disabled. It will lead to NULL derefence of net->ipv6.devconf_all in ip6_pol_route(). BUG: kernel NULL pointer dereference, address: 000000000000000c [...] Workqueue: bond0 bond_arp_monitor [bonding] RIP: 0010:ip6_pol_route+0x69/0x480 [...] Call Trace: <TASK> ? srso_return_thunk+0x5/0x5f ? __pfx_ip6_pol_route_output+0x10/0x10 fib6_rule_lookup+0xfe/0x260 ? wakeup_preempt+0x8a/0x90 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? sched_balance_rq+0x369/0x810 ip6_route_output_flags+0xd7/0x170 bond_ns_send_all+0xde/0x280 [bonding] bond_ab_arp_probe+0x296/0x320 [bonding] ? srso_return_thunk+0x5/0x5f bond_activebackup_arp_mon+0xb4/0x2c0 [bonding] process_one_work+0x196/0x370 worker_thread+0x1af/0x320 ? srso_return_thunk+0x5/0x5f ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x199/0x260 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Fix this by adding ipv6_mod_enabled() condition check in the caller. | ||||
| CVE-2026-68327 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wan: wanxl: Only reset hardware after BAR mapping wanxl_pci_init_one() stores the freshly allocated card in driver data before the PLX BAR is mapped. Several early probe failures then unwind through wanxl_pci_remove_one(), including failure to allocate the coherent status area or to restore the DMA mask. wanxl_pci_remove_one() unconditionally calls wanxl_reset(), and wanxl_reset() dereferences card->plx. On those early failures card->plx is still NULL, so the error path can dereference a NULL MMIO pointer. Only issue the hardware reset once the BAR mapping exists. The remaining cleanup in wanxl_pci_remove_one() already checks whether later resources were allocated. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68328 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfp: Check resource mutex allocation nfp_cpp_resource_find() allocates a CPP mutex handle for the matching resource-table entry and then reports success. nfp_resource_try_acquire() immediately passes that handle to nfp_cpp_mutex_trylock(). However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens for a matching table entry, the resource lookup still returns success and the following trylock dereferences a NULL mutex pointer while opening the resource. nfp_resource_acquire() already treats failure to allocate the table mutex as -ENOMEM. Do the same for the resource mutex and fail the lookup before publishing the rest of the resource handle. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-55814 | 1 Apache | 1 Ranger | 2026-08-10 | 7.5 High |
| Missing Authentication in Apache Ranger Download APIs on versions <= 2.8.0. Users are recommended to upgrade to version 2.9.0, which fixes this issue. | ||||
| CVE-2026-68308 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: check pointer returned by mt76_connac_get_he_phy_cap() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it. | ||||
| CVE-2026-68311 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: guard link STA in decap offload mt7925_sta_set_decap_offload() iterates over the vif valid_links mask when updating decap offload state for an MLO station. The station may not have a link STA for every valid link of the vif, so mt792x_sta_to_link() can return NULL for a link that belongs to the vif but not to the station. The function currently dereferences mlink before checking whether the link WCID is ready. If mlink is NULL, setting or clearing MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer. Skip links without a station link before touching mlink->wcid. | ||||
| CVE-2026-68322 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, inet6_addr_lst is never initialized because inet6_init() exits before addrconf_init() is called to initialize it. An attempt to bind an RDS socket to an ipv6 address results in a crash in __ipv6_chk_addr_and_flags() KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:__ipv6_chk_addr_and_flags+0x1df/0x7e0 Call Trace: <TASK> ipv6_chk_addr+0x3b/0x50 rds_tcp_laddr_check+0x155/0x3b0 [rds_tcp] rds_trans_get_preferred+0x15d/0x2d0 [rds] ? trace_hardirqs_on+0x2d/0x110 rds_bind+0x1433/0x1d60 [rds] ? rds_remove_bound+0xd50/0xd50 [rds] ? aa_af_perm+0x250/0x250 ? __might_fault+0xde/0x190 ? __sys_bind+0x1dc/0x210 __sys_bind+0x1dc/0x210 ? __ia32_sys_socketpair+0x100/0x100 ? restore_fpregs_from_fpstate+0x53/0x100 __x64_sys_bind+0x73/0xb0 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f47f8269ea9 </TASK> The following code reproduces the issue: struct sockaddr_in6 addr; s = socket(PF_RDS, SOCK_SEQPACKET, 0); memset(&addr, 0, sizeof(addr)); inet_pton(AF_INET6, ADDRESS, &addr.sin6_addr); addr.sin6_family = AF_INET6; addr.sin6_port = htons(PORT); bind(s, &addr, sizeof(addr)); Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||