| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the SIP parser in rust/src/sip/parser.rs stores request and response body lengths in 16-bit fields. A SIP body larger than 65,536 bytes can truncate the length and prevent frame:request.body or frame:response.body from exposing the complete body to inspection, allowing content in the omitted portion to evade frame-based detection. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 8.0.6, the FTP parser in src/app-layer-ftp.c treats a RETR or STOR command sent before PORT or PASV negotiation as a fatal application-layer error instead of a recoverable protocol event. The fatal state disables FTP application-layer parsing for the remainder of the TCP flow, so later commands can evade parser-dependent rules and logging; IPS mode instead drops the flow. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, a locally supplied detection rule that combines frame inspection without content and a transformed match without content can make src/detect-engine-prefilter.c select multiple non-prefilter frame engines while preparing signatures for non-prefilter inspection. Loading the crafted rule, including in test mode, can trigger a heap buffer overflow and crash Suricata; network traffic alone cannot reach the flaw. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Starting in version 8.0.0 and prior to version 8.0.5, Suricata's IP defragmentation code could deadlock when processing fragmented traffic containing an encapsulated tunnel protocol whose payload is itself fragmented. Version 8.0.5 contains a fix. No known workarounds are available. |
| Suricata before 8.0.7 has a DoH2 type confusion that can cause an invalid free, because cleanup code for the HTTP2 state is executed even though the actual state is HTTP1 (when there is a DoH2 request with an HTTP1 to HTTP2 upgrade). This requires app-layer.protocols.doh2 to be enabled, which is the default in 8.x versions. |
| Suricata before 8.0.7 has an Http2ThreadMultiBuf use-after-free when a transaction is inspected by rules that use http.response_header with and without a transform. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5, a malicious rule could potentially overwrite any file on the file system on rule load or reload. Versions 7.0.16 and 8.0.5 fix the issue. Some workarounds are available. Preprocess `load`+ `save` rules to disallow absolute filenames for save, use Suricata's privilege dropping to limit writable files, and/or configure landlock in suricata.yaml. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5, certain NFS parser state structures were insufficiently bounded. Crafted NFS traffic may cause Suricata to consume excessive memory, potentially resulting in denial of service. Versions 7.0.16 and 8.0.5 contain a fix. As a workaround, disable NFS application-layer parsing if it is not needed. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5, DNP3 reassembly could buffer data without sufficient parser-level bounds. Crafted DNP3 traffic may cause Suricata to consume excessive memory, potentially resulting in denial of service. Versions 7.0.16 and 8.0.5 contain a fix. As a workaround, disable DNP3 (which is not enabled by default) if it is not needed, and/or define a limited `stream.reassembly.depth` (0 or absent is unlimited). |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5, a protocol change while processing HTTP/2 traffic could lead to type confusion in Suricata. Crafted traffic may cause Suricata to crash, resulting in denial of service. Versions 7.0.16 and 8.0.5 contain a fix. As a workaround, disable HTTP/2 parsing if it is not required. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5, a crafted rule using mixed-case frame syntax could trigger a heap buffer overflow while Suricata is loading signatures. The issue is reached during rule parsing/loading rather than by network traffic alone. Versions 7.0.16 and 8.0.5 contain a fix. As a workaround, preprocess rules to check that frames are all lowercase and/or only load trusted rulesets. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5, Suricata could repeatedly perform expensive parsing of large HTTP `Content-Disposition` headers during HTTP response body processing. Crafted HTTP traffic could cause excessive CPU usage and denial of service. Versions 7.0.16 and 8.0.5 contain a fix. As a workaround, use a rule like `alert http1 any any -> any any (sid: 1; http.request_header; content: "Content-Disposition:"; startswith; bsize: > 8192; bypass;)`. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Starting in version 8.0.0 and prior to version 8.0.5, LDAP transaction state could store an unbounded number of responses. Because LDAP can be processed over UDP, crafted traffic may cause Suricata to consume excessive memory, potentially resulting in denial of service. Version 8.0.5 contains a fix. As a workaround, disable LDAP application-layer parsing where it is not required. Alternatively, use a rule like `alert ldap any any -> any any (sid: 1; ldap.responses.count: >1024; bypass;)`. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5,IKEv2 parser state could grow without bounds while storing client transforms. Repeated crafted UDP traffic may cause Suricata to consume excessive memory, potentially resulting in denial of service. Versions 7.0.16 and 8.0.5 fix the issue. Some workarounds are available. Disable IKE application-layer parsing if it is not needed. Alternatively, use a rule to bypass ike flows after the first packets like `alert ike any any -> any any (sid: 2; flow.pkts_toserver: > 256; bypass; noalert;)`. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Starting in version 8.0.0 and prior to version 8.0.5, a Lua rule that registers too many flow variables can corrupt Lua detection state and may bypass Suricata's restricted Lua sandbox. This requires an affected Lua script/rule to be loaded. Excessive flow variables being registered may also cause Suricata to crash. Version 8.0.5 contains a fix. As a workaround, disable `security.lua.allow-rules` unless Lua rules are required. |
| Suricata is a network IDS, IPS and NSM engine. While saving a dataset a stack buffer is used to prepare the data. Prior to versions 8.0.3 and 7.0.14, if the data in the dataset is too large, this can result in a stack overflow. Versions 8.0.3 and 7.0.14 contain a patch. As a workaround, do not use rules with datasets `save` nor `state` options. |
| Suricata is a network IDS, IPS and NSM engine. Starting in version 8.0.0 and prior to version 8.0.3, inefficiency in http1 headers parsing can lead to slowdown over multiple packets. Version 8.0.3 patches the issue. No known workarounds are available. |
| Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, crafted DCERPC traffic can cause Suricata to expand a buffer w/o limits, leading to memory exhaustion and the process getting killed. While reported for DCERPC over UDP, it is believed that DCERPC over TCP and SMB are also vulnerable. DCERPC/TCP in the default configuration should not be vulnerable as the default stream depth is limited to 1MiB. Versions 8.0.3 and 7.0.14 contain a patch. Some workarounds are available. For DCERPC/UDP, disable the parser. For DCERPC/TCP, the `stream.reassembly.depth` setting will limit the amount of data that can be buffered. For DCERPC/SMB, the `stream.reassembly.depth` can be used as well, but is set to unlimited by default. Imposing a limit here may lead to loss of visibility in SMB. |
| Suricata is a network IDS, IPS and NSM engine. Starting in version 8.0.0 and prior to version 8.0.3, Suricata can crash with a stack overflow. Version 8.0.3 patches the issue. As a workaround, use default values for `request-body-limit` and `response-body-limit`. |
| Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, specially crafted traffic can cause Suricata to consume large amounts of memory while parsing DNP3 traffic. This can lead to the process slowing down and running out of memory, potentially leading to it getting killed by the OOM killer. Versions 8.0.3 or 7.0.14 contain a patch. As a workaround, disable the DNP3 parser in the suricata yaml (disabled by default). |
