| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in WebKitGTK. Processing malicious web content can cause an unexpected process crash due to improper memory handling. |
| An unauthenticated
buffer overflow vulnerability exists in IEEE8021x_upload.cgi in GeoVision
GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by
insufficient bounds checking when parsing filename values in multipart upload
data. A remote attacker may exploit this vulnerability by sending a crafted
upload request with overly long input, causing memory corruption and resulting
in a denial of service. |
| libxml2 is vulnerable to multiple stack-based buffer overflows in the xmlcatalog utility when running in --shell mode. The usershell() function processes user input using fixed-size stack buffers without proper bounds checking.
By supplying an overly long input line, an attacker can overflow internal buffers (command, arg, and argv) during input parsing. This results in memory corruption within the stack frame.
Successful exploitation may cause a crash or potentially allow arbitrary code execution in the context of the xmlcatalog process.
This issue has been fixed in the commit c2e233fc.
NOTE:
The maintainers of this project did not agree that this issue is a vulnerability and considered it a bug. |
| A flaw has been found in Edimax EW-7478APC 1.04. This issue affects the function formUSBAccount of the file /goform/formUSBAccount of the component POST Request Handler. This manipulation of the argument UserName/Password causes buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Edimax EW-7478APC 1.04. This affects the function formQoS of the file /goform/formQoS of the component POST Request Handler. The manipulation of the argument selSSID leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add buffer overflow check in MS get_info_ioctl
Add validation that the info size returned from the metric stream info
query is not exceeded when checked against the allocated buffer size.
If the firmware returns a size larger than the buffer, reject the
operation with -EOVERFLOW instead of proceeding with an incorrect
buffer copy. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.34.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, a vulnerability exists in Envoy's TCP StatsD sink (TcpStatsdSink), where the thread-local flusher buffer can be overflowed by exceptionally long statistic names (e.g., >16KiB). During formatting, TcpStatsdSink reserves a single contiguous memory slice of 16KiB (FLUSH_SLICE_SIZE_BYTES). If formatting a single metric exceeds the remaining capacity, the flusher initiates a buffer rotation but incorrectly continues to allocate another fixed 16KiB slice. If an attacker can trigger a statistic name longer than 16KiB—for example, by sending an HTTP or gRPC request with an extremely long request path (:path) that is recorded by the grpc_stats filter configured with stats_for_all_methods: true—the flusher will attempt to copy the metric name using memcpy operations beyond the allocated heap buffer boundaries. This leads to a heap write overflow, which can cause immediate denial-of-service (process crash) or potential remote code execution (RCE). This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() validates the total firmware size
but not img_header->Length specifically.
Fix by rejecting images where img_header->Length exceeds the
available destination space. |
| The PKCS#7 decode path ignores the caller-supplied output buffer size (outputSz), allowing decoded content to be written past the bounds of the provided buffer. This affects wolfSSL 5.9.0 and earlier and was fixed in the 5.9.1 release. |
| In JazzCore python-pdfkit 1.0.0, the from_string method enables the execution of JavaScript code within the context of the server application and the exfiltration of local files. |
| Hydra through 9.7, fixed in commit 9cc84c2, contains a stack buffer overflow in NTLM authentication across SMTP, POP3, IMAP, NNTP, HTTP, HTTP-Proxy, and HTTP-Proxy-Urlenum modules when processing malicious NTLM Type-2 challenges. A malicious server can send a crafted NTLM Type-2 challenge with an excessively long domain string, causing base64-encoded response data to overflow a 500-byte stack buffer by 18 to 330 bytes, enabling remote code execution on systems without stack protection. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
(cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) |
| NSD version 4.14.0 introduced a bug where a specially crafted APL RR, with an adflength larger than permitted for the address family will overwrite the stack when the zone is written to disk, with a maximum of 111 attacker controlled bytes. |
| InHand Networks IR912 V1.0.0.r20042 and IR915 V1.0.0.r20042 (including earlier versions) were discovered to contain a buffer overflow vulnerability in the device registration function. This vulnerability could allow an attacker to cause a denial of service attack on the remote target device. |
| OpenColorIO is a color management framework for visual effects and animation. Prior to version 2.5.2, `FileFormatSpi3D.cpp:163` uses `sscanf` with `%s` into 64-byte stack buffers when parsing LUT data lines. Input comes from `lineBuffer[4096]`, so a crafted .spi3d file can overflow by ~4000 bytes on non-Windows. Version 2.5.2 fixes the issue. |
| In WC-Radio, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. From 42.3.1 until 42.3.3, Buffer performs incorrect byte length calculations resulting in heap buffer under/overflow. Most apps will crash and some may perform incorrect buffer allocations in the Node.js Buffer API resulting in unexpected truncation or allocation. This vulnerability is fixed in 42.3.3. |
| A buffer overflow flaw was found in base/gdevdevn.c:1973 in devn_pcx_write_rle() in ghostscript. This issue may allow a local attacker to cause a denial of service via outputting a crafted PDF file for a DEVN device with gs. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-23, due to a missing depth check a stack overflow can occur in the fx operation by passing a crafted argument. This issue has been patched in version 7.1.2-23. |
| fast-xml-parser allows users to validate XML, parse XML to JS object, or build XML from JS object without C/C++ based libraries and no callback. Prior to version 5.3.8, the application crashes with stack overflow when user use XML builder with `preserveOrder:true`. Version 5.3.8 fixes the issue. As a workaround, use XML builder with `preserveOrder:false` or check the input data before passing to builder. |
