| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: use netlink policy range checks
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Fix wildcard bind conflict check when using hash2
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: ensure we're polling a polled queue
A user can change the polled queue count at run time. There's a brief
window during a reset where a hipri task may try to poll that queue
before the block layer has updated the queue maps, which would race with
the now interrupt driven queue and may cause double completions. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb
Before using sk pointer, check if it is null.
Fix the following:
KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267]
CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025
Workqueue: events l2cap_info_timeout
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
veth0_macvtap: entered promiscuous mode
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0
PKRU: 55555554
Call Trace:
<TASK>
__kasan_check_byte+0x12/0x40
lock_acquire+0x79/0x2e0
lock_sock_nested+0x48/0x100
? l2cap_sock_ready_cb+0x46/0x160
l2cap_sock_ready_cb+0x46/0x160
l2cap_conn_start+0x779/0xff0
? __pfx_l2cap_conn_start+0x10/0x10
? l2cap_info_timeout+0x60/0xa0
? __pfx___mutex_lock+0x10/0x10
l2cap_info_timeout+0x68/0xa0
? process_scheduled_works+0xa8d/0x18c0
process_scheduled_works+0xb6e/0x18c0
? __pfx_process_scheduled_works+0x10/0x10
? assign_work+0x3d5/0x5e0
worker_thread+0xa53/0xfc0
kthread+0x388/0x470
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x51e/0xb90
? __pfx_ret_from_fork+0x10/0x10
veth1_macvtap: entered promiscuous mode
? __switch_to+0xc7d/0x1450
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
batman_adv: batadv0: Interface activated: batadv_slave_0
batman_adv: batadv0: Interface activated: batadv_slave_1
netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
ieee80211 phy39: Selected rate control algorithm 'minstrel_ht'
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
af_key: validate families in pfkey_send_migrate()
syzbot was able to trigger a crash in skb_put() [1]
Issue is that pfkey_send_migrate() does not check old/new families,
and that set_ipsecrequest() @family argument was truncated,
thus possibly overfilling the skb.
Validate families early, do not wait set_ipsecrequest().
[1]
skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL>
kernel BUG at net/core/skbuff.c:214 !
Call Trace:
<TASK>
skb_over_panic net/core/skbuff.c:219 [inline]
skb_put+0x159/0x210 net/core/skbuff.c:2655
skb_put_zero include/linux/skbuff.h:2788 [inline]
set_ipsecrequest net/key/af_key.c:3532 [inline]
pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636
km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848
xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705
xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150 |
| In the Linux kernel, the following vulnerability has been resolved:
esp: fix skb leak with espintcp and async crypto
When the TX queue for espintcp is full, esp_output_tail_tcp will
return an error and not free the skb, because with synchronous crypto,
the common xfrm output code will drop the packet for us.
With async crypto (esp_output_done), we need to drop the skb when
esp_output_tail_tcp returns an error. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: platform: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use after free of parent_port in cxl_detach_ep()
cxl_detach_ep() is called during bottom-up removal when all CXL memory
devices beneath a switch port have been removed. For each port in the
hierarchy it locks both the port and its parent, removes the endpoint,
and if the port is now empty, marks it dead and unregisters the port
by calling delete_switch_port(). There are two places during this work
where the parent_port may be used after freeing:
First, a concurrent detach may have already processed a port by the
time a second worker finds it via bus_find_device(). Without pinning
parent_port, it may already be freed when we discover port->dead and
attempt to unlock the parent_port. In a production kernel that's a
silent memory corruption, with lock debug, it looks like this:
[]DEBUG_LOCKS_WARN_ON(__owner_task(owner) != get_current())
[]WARNING: kernel/locking/mutex.c:949 at __mutex_unlock_slowpath+0x1ee/0x310
[]Call Trace:
[]mutex_unlock+0xd/0x20
[]cxl_detach_ep+0x180/0x400 [cxl_core]
[]devm_action_release+0x10/0x20
[]devres_release_all+0xa8/0xe0
[]device_unbind_cleanup+0xd/0xa0
[]really_probe+0x1a6/0x3e0
Second, delete_switch_port() releases three devm actions registered
against parent_port. The last of those is unregister_port() and it
calls device_unregister() on the child port, which can cascade. If
parent_port is now also empty the device core may unregister and free
it too. So by the time delete_switch_port() returns, parent_port may
be free, and the subsequent device_unlock(&parent_port->dev) operates
on freed memory. The kernel log looks same as above, with a different
offset in cxl_detach_ep().
Both of these issues stem from the absence of a lifetime guarantee
between a child port and its parent port.
Establish a lifetime rule for ports: child ports hold a reference to
their parent device until release. Take the reference when the port
is allocated and drop it when released. This ensures the parent is
valid for the full lifetime of the child and eliminates the use after
free window in cxl_detach_ep().
This is easily reproduced with a reload of cxl_acpi in QEMU with CXL
devices present. |
| A flaw was found in util-linux. Improper hostname canonicalization in the `login(1)` utility, when invoked with the `-h` option, can modify the supplied remote hostname before setting `PAM_RHOST`. A remote attacker could exploit this by providing a specially crafted hostname, potentially bypassing host-based Pluggable Authentication Modules (PAM) access control rules that rely on fully qualified domain names. This could lead to unauthorized access. |
| Unisys WebPerfect Image Suite versions 3.0.3960.22810 and 3.0.3960.22604 expose an unauthenticated WCF SOAP endpoint on TCP port 1208 that accepts unsanitized file paths in the ReadLicense action's LFName parameter, allowing remote attackers to trigger SMB connections and leak NTLMv2 machine-account hashes. Attackers can submit crafted SOAP requests with UNC paths to force the server to initiate outbound SMB connections, exposing authentication credentials that may be relayed for privilege escalation or lateral movement within the network. |
| Unisys WebPerfect Image Suite versions 3.0.3960.22810 and 3.0.3960.22604 expose a deprecated .NET Remoting TCP channel that allows remote unauthenticated attackers to leak NTLMv2 machine-account hashes by supplying a Windows UNC path as a target file argument through object-unmarshalling techniques. Attackers can capture the leaked NTLMv2 hash and relay it to other hosts to achieve privilege escalation or lateral movement depending on network configuration and patch level. |
| Cross-Site Request Forgery (CSRF) vulnerability in Heateor Support Heateor Social Login heateor-social-login allows Cross Site Request Forgery.This issue affects Heateor Social Login: from n/a through <= 1.1.39. |
| In Dolibarr ERP & CRM <= 22.0.4, PHP code detection and editing permission enforcement in the Website module is not applied consistently to all input parameters, allowing an authenticated user restricted to HTML/JavaScript editing to inject PHP code through unprotected inputs during website page creation. |
| In the Website module of Dolibarr ERP & CRM 22.0.4 and below, the application uses blacklist-based filtering to restrict dangerous PHP functions related to system command execution. An authenticated user with permission to edit PHP content can bypass this filtering, resulting in full remote code execution with the ability to execute arbitrary operating system commands on the server. |
| PJSIP is a free and open source multimedia communication library written in C. In 2.16 and earlier, there is a buffer overflow when decoding Opus audio frames due to insufficient buffer size validation in the Opus codec decode path. The FEC decode buffers (dec_frame[].buf) were allocated based on a PCM-derived formula: (sample_rate/1000) * 60 * channel_cnt * 2. At 8 kHz mono this yields only 960 bytes, but codec_parse() can output encoded frames up to MAX_ENCODED_PACKET_SIZE (1280) bytes via opus_repacketizer_out_range(). The three pj_memcpy() calls in codec_decode() copied input->size bytes without bounds checking, causing a heap buffer overflow. |
| Decidim is a participatory democracy framework. Starting in version 0.19.0 and prior to versions 0.30.5 and 0.31.1, a vulnerability allows any registered and authenticated user to accept or reject any amendments. The impact is on any users who have created proposals where the amendments feature is enabled. This also elevates the user accepting the amendment as the author of the original proposal as people amending proposals are provided coauthorship on the coauthorable resources. Versions 0.30.5 and 0.31.1 fix the issue. As a workaround, disable amendment reactions for the amendable component (e.g. proposals). |
| PJSIP is a free and open source multimedia communication library written in C. In 2.16 and earlier, a stack buffer overflow exists in pjsip_auth_create_digest2() in PJSIP when using pre-computed digest credentials (PJSIP_CRED_DATA_DIGEST). The function copies credential data using cred_info->data.slen as the length without an upper-bound check, which can overflow the fixed-size ha1 stack buffer (128 bytes) if data.slen exceeds the expected digest string length. |
