| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix memory leak after finding block group with super blocks
At exclude_super_stripes(), if we happen to find a block group that has
super blocks mapped to it and we are on a zoned filesystem, we error out
as this is not supposed to happen, indicating either a bug or maybe some
memory corruption for example. However we are exiting the function without
freeing the memory allocated for the logical address of the super blocks.
Fix this by freeing the logical address. |
| An Integer-based buffer overflow vulnerability in the SonicOS via IPSec allows a remote attacker in specific conditions to cause Denial of Service (DoS) and potentially execute arbitrary code by sending a specially crafted IKEv2 payload. |
| The AVGUI.exe of AVG/Avast Antivirus before versions before 24.1 can allow a local attacker to escalate privileges via an COM hijack in a time-of-check to time-of-use (TOCTOU) when self protection is disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: quark_dts: fix error pointer dereference
If alloc_soc_dts() fails, then we can just return. Trying to free
"soc_dts" will lead to an Oops. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in AndonDesign UDesign allows Reflected XSS.This issue affects UDesign: from n/a through 4.7.3.
|
| The Conditional Fields for Contact Form 7 plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 2.4.13. This is due to missing or incorrect nonce validation on the wpcf7cf_admin_init function. This makes it possible for unauthenticated attackers to reset the plugin's settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| Vulnerability in Wikimedia Foundation OATHAuth. This vulnerability is associated with program files src/Special/OATHManage.Php.
This issue affects OATHAuth: from * before 1.39.14, 1.43.4, 1.44.1. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: bus: verify partner exists in typec_altmode_attention
Some usb hubs will negotiate DisplayPort Alt mode with the device
but will then negotiate a data role swap after entering the alt
mode. The data role swap causes the device to unregister all alt
modes, however the usb hub will still send Attention messages
even after failing to reregister the Alt Mode. type_altmode_attention
currently does not verify whether or not a device's altmode partner
exists, which results in a NULL pointer error when dereferencing
the typec_altmode and typec_altmode_ops belonging to the altmode
partner.
Verify the presence of a device's altmode partner before sending
the Attention message to the Alt Mode driver. |
| The Joli FAQ SEO – WordPress FAQ Plugin plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.3.2. This is due to missing or incorrect nonce validation when saving settings. This makes it possible for unauthenticated attackers to change the plugin's settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| Samsung Galaxy Buds and Galaxy Buds 2 audio devices are Bluetooth pairable by default without user input nor a way to stop this mode. As a consequence, audio playback takeover or even microphone recording without user consent or notification is achieved. Note: This is considered a low severity vulnerability by the vendor. |
| The User Generator and Importer plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to and including 1.2.2. This is due to missing nonce validation in the "Import Using CSV File" function. This makes it possible for unauthenticated attackers to elevate user privileges by creating arbitrary accounts with administrator privileges via a forged request, provided they can trick a site administrator into performing an action such as clicking on a link. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx
For the reasons also described in commit b383e8abed41 ("wifi: ath9k: avoid
uninit memory read in ath9k_htc_rx_msg()"), ath9k_htc_rx_msg() should
validate pkt_len before accessing the SKB.
For example, the obtained SKB may have been badly constructed with
pkt_len = 8. In this case, the SKB can only contain a valid htc_frame_hdr
but after being processed in ath9k_htc_rx_msg() and passed to
ath9k_wmi_ctrl_rx() endpoint RX handler, it is expected to have a WMI
command header which should be located inside its data payload.
Implement sanity checking inside ath9k_wmi_ctrl_rx(). Otherwise, uninit
memory can be referenced.
Tested on Qualcomm Atheros Communications AR9271 802.11n .
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| The Easy Restaurant Table Booking plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.0.0. This is due to missing or incorrect nonce validation when saving settings. This makes it possible for unauthenticated attackers to change the plugin's settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| Square Wire before 5.2.0 does not enforce a recursion limit on nested groups in ByteArrayProtoReader32.kt and ProtoReader.kt. |
| Grafana is an open-source platform for monitoring and observability. The Infinity datasource plugin, maintained by Grafana Labs, allows visualizing data from JSON, CSV, XML, GraphQL, and HTML endpoints.
If the plugin was configured to allow only certain URLs, an attacker could bypass this restriction using a specially crafted URL. This vulnerability is fixed in version 3.4.1. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_bcm7271: fix leak in `brcmuart_probe`
Smatch reports:
drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn:
'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032.
The issue is fixed by using a managed clock. |
| In chainmaker-go (aka ChainMaker) before 2.3.6, multiple updates to a single node's configuration can cause other normal nodes to perform concurrent read and write operations on a map, leading to a panic. |
| The Appointment Booking Calendar — Simply Schedule Appointments Booking Plugin plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 1.6.8.5. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix data race on CQP completion stats
CQP completion statistics is read lockesly in irdma_wait_event and
irdma_check_cqp_progress while it can be updated in the completion
thread irdma_sc_ccq_get_cqe_info on another CPU as KCSAN reports.
Make completion statistics an atomic variable to reflect coherent updates
to it. This will also avoid load/store tearing logic bug potentially
possible by compiler optimizations.
[77346.170861] BUG: KCSAN: data-race in irdma_handle_cqp_op [irdma] / irdma_sc_ccq_get_cqe_info [irdma]
[77346.171383] write to 0xffff8a3250b108e0 of 8 bytes by task 9544 on cpu 4:
[77346.171483] irdma_sc_ccq_get_cqe_info+0x27a/0x370 [irdma]
[77346.171658] irdma_cqp_ce_handler+0x164/0x270 [irdma]
[77346.171835] cqp_compl_worker+0x1b/0x20 [irdma]
[77346.172009] process_one_work+0x4d1/0xa40
[77346.172024] worker_thread+0x319/0x700
[77346.172037] kthread+0x180/0x1b0
[77346.172054] ret_from_fork+0x22/0x30
[77346.172136] read to 0xffff8a3250b108e0 of 8 bytes by task 9838 on cpu 2:
[77346.172234] irdma_handle_cqp_op+0xf4/0x4b0 [irdma]
[77346.172413] irdma_cqp_aeq_cmd+0x75/0xa0 [irdma]
[77346.172592] irdma_create_aeq+0x390/0x45a [irdma]
[77346.172769] irdma_rt_init_hw.cold+0x212/0x85d [irdma]
[77346.172944] irdma_probe+0x54f/0x620 [irdma]
[77346.173122] auxiliary_bus_probe+0x66/0xa0
[77346.173137] really_probe+0x140/0x540
[77346.173154] __driver_probe_device+0xc7/0x220
[77346.173173] driver_probe_device+0x5f/0x140
[77346.173190] __driver_attach+0xf0/0x2c0
[77346.173208] bus_for_each_dev+0xa8/0xf0
[77346.173225] driver_attach+0x29/0x30
[77346.173240] bus_add_driver+0x29c/0x2f0
[77346.173255] driver_register+0x10f/0x1a0
[77346.173272] __auxiliary_driver_register+0xbc/0x140
[77346.173287] irdma_init_module+0x55/0x1000 [irdma]
[77346.173460] do_one_initcall+0x7d/0x410
[77346.173475] do_init_module+0x81/0x2c0
[77346.173491] load_module+0x1232/0x12c0
[77346.173506] __do_sys_finit_module+0x101/0x180
[77346.173522] __x64_sys_finit_module+0x3c/0x50
[77346.173538] do_syscall_64+0x39/0x90
[77346.173553] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[77346.173634] value changed: 0x0000000000000094 -> 0x0000000000000095 |
| There is an elevation of privilege vulnerability in server
and client components of Absolute Secure Access prior to version 13.07.
Attackers with local access and valid desktop user credentials can elevate
their privilege to system level by passing invalid address data to the vulnerable
component. This could be used to
manipulate process tokens to elevate the privilege of a normal process to
System. The scope is changed, the impact to system confidentiality and
integrity is high, the impact to the availability of the effected component is
none. |