| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie()
rtw_restruct_wmm_ie() scans in_ie for a WMM IE with:
while (i < in_len) {
...
if (i + 5 < in_len && in_ie[i] == 0xDD && ...) {
...
break;
}
i += (in_ie[i + 1] + 2); /* to the next IE element */
}
When the "i + 5 < in_len" match check fails simply because i is
within 5 bytes of the end of the buffer (i.e. no WMM IE was found
near the tail of in_ie), execution falls through to
"i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len
- 1 at that point, this is a 1-byte out-of-bounds read of an
attacker-influenced IE buffer built from association/scan data.
Commit a75281626fc8f ("staging: rtl8723bs: fix potential
out-of-bounds read in rtw_restruct_wmm_ie") added the "i + 5 <
in_len" guard to the match condition itself, but did not add an
equivalent guard before the fallthrough advance, so the same class
of OOB read remained reachable through the non-matching path.
Add an explicit bounds check before advancing to the next IE. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening options file
The options files do not take the trace_array reference for the options
they represent. This could cause a use-after-free kernel crash if one of
these files is opened by one task and another task removes the instance
that the option is for. Because it doesn't take a reference upon opening,
it will not stop the removal which will free the options descriptor that
is being used.
As the options are somewhat dynamic in their creation at boot up, each
file represents a flag in the trace_array. The trace_array has an array of
indexes to represent each of these flags that is stored in the
trace_flags_index array. The address of the index array element is used to
pass to the inode->i_private pointer. Then that element is read which
holds the index (which represents the flag) and then the index is used to
calculate the trace_array descriptor from its trace_flags_index array.
One issue is that the index element can not be referenced until the
trace_array's reference is taken. To handle this, create a new helper
function called: trace_array_options_get() that will iterate all the
existing trace_arrays in the ftrace_trace_arrays list (under the
trace_types_lock), and compare the passed in address of the index element
with the entire array of the trace_array's trace_flags_index array.
If it matches, then up the corresponding trace_array's reference and
return. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Protect kprobe_blacklist with RCU
__within_kprobe_blacklist() traverses kprobe_blacklist without holding
kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist()
removes blacklist entries and immediately frees them with kfree().
A concurrent call to within_kprobe_blacklist() can therefore dereference
freed memory.
Furthermore, within_kprobe_blacklist() can be called in atomic or
non-preemptible contexts where the sleeping kprobe_mutex cannot be taken.
Protect kprobe_blacklist with RCU. Use guard(rcu)() and
list_for_each_entry_rcu() for traversal, list_add_tail_rcu() for
insertions, list_del_rcu() for deletions, and kfree_rcu() to reclaim
entries safely after a grace period. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Fix race between non-atomic ops and trigger-start
We protect the races of the concurrent state transitions between
atomic PCM ops, but the checks between the non-atomic ops (hw_params,
hw_free and prepare) and the atomic ops aren't perfect; there is a
check of the conflicting PCM state at the beginning of hw_params & co,
but the atomic PCM ops can be still issued during the non-atomic PCM
operations. An example such scenario is that a thread A re-issues the
PREPARE or HW_PARAMS for the already prepared stream, while another
thread B triggers the PCM start in the middle of the prepare
operation. Although this usually doesn't lead to much serious issues,
it can give some inconsistency as reported by syzkaller (such as
ODEBUG warning).
There are various atomic PCM ops, and basically the only problem is
the PCM start as it operates from the PREPARED state. Other trigger
commands (stop, etc) are for the running or the other special state,
hence they are filtered as pre-condition.
This patch is for preventing the PCM trigger-start during the non-
atomic operations in order to address the problems above.
Fortunately, the hw_params, hw_free and prepare operations call
snd_pcm_buffer_access_lock(), and this can be used for checking the
concurrent operations at the PCM trigger -- which sets the
runtime->buffer_accessing to a negative (if possible), so the PCM
trigger just needs to check the runtime->buffer_accessing value; if
it's negative, it means the concurrent non-atomic PCM ops is running. |
| reNgine through 2.2.0 contains an authorization bypass vulnerability in the GetFileContents API endpoint that allows any authenticated user to read bundled recon tool configuration files. Attackers with low-privilege Auditor roles can access files containing third-party API keys for services like SecurityTrails, Shodan, Censys, VirusTotal, BinaryEdge and Hunter by querying the endpoint without role-based permission checks. |
| Hippo4j through 1.5.0 contains a server-side request forgery vulnerability in four ThreadPoolController endpoints that fail to validate the clientAddress parameter. Authenticated attackers can supply arbitrary hostnames and ports to trigger outbound GET requests to internal networks and cloud metadata services. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: reject unsolicited H2CData PDUs
nvmet_tcp_handle_h2c_data_pdu() accepts an H2CData PDU after only checking
that its TTAG is a valid in-range command index and that the command's
data buffers are mapped. It never checks that the target has actually
solicited that data by sending an R2T for the command.
A remote host can abuse this. It submits a write command that takes the
R2T path and, before the target transmits the R2T, sends an H2CData PDU
for that command's tag. The data completes the command early, and when
the command then fails synchronously (e.g. a length mismatch caught by
nvmet_check_transfer_len()), it is completed a second time. Each
completion calls nvmet_tcp_queue_response(), so the same command is added
to queue->resp_list twice while it is still linked; the second llist_add()
makes the node point to itself (lentry->next == lentry).
nvmet_tcp_process_resp_list() then walks that self-referential node and
adds the command to resp_send_list twice. With CONFIG_DEBUG_LIST this
trips the "list_add double add" check (kernel BUG); without it the loop
never terminates and the nvmet_tcp workqueue wedges (soft-lockup). It is
remotely triggerable and needs no authentication on an allow_any_host
subsystem.
Track whether an R2T has been transmitted for a command and reject an
H2CData PDU that arrives before it. The flag is cleared on command reuse
(nvmet_tcp_get_cmd() zeroes cmd->flags) and stays set across the multiple
H2CData PDUs of a single solicited transfer. |
| Rallly before 4.15.0 contains an information disclosure vulnerability in the polls.get tRPC procedure that returns scheduled-event invitee names and email addresses to unauthenticated callers. Attackers can access a poll's urlId from public invite links to retrieve sensitive invitee information regardless of privacy settings. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed
The vfio_ap_mdev_hot_unplug_cfg() function uses the return value of
bitmap_andnot() to determine whether the guest APCB needs to be updated.
However, bitmap_andnot() returns false when the resulting destination
bitmap is empty. This means that if the only adapter, domain or control
domain assigned to an mdev is removed from the host's AP configuration,
the bit is correctly cleared from the shadow APCB, but bitmap_andnot()
returns false because the result is an empty bitmap. Consequently,
do_hotplug remains 0 and vfio_ap_mdev_update_guest_apcb() is never called,
leaving the KVM guest with stale hardware access to the unplugged AP
devices.
Fix this by replacing the bitmap_andnot() return value check with
bitmap_intersects() to determine whether the shadow APCB actually
overlaps with the removal mask. If there is an intersection, call
bitmap_andnot() solely for its side effect of clearing the bits, then
unconditionally set do_hotplug to trigger the guest APCB update. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Take srcu when importing watchpoint data
__import_wp_info() backs up the original guest memory contents of a
watchpoint with read_guest_abs(), which is kvm_read_guest() and therefore
resolves the memslot via __kvm_memslots(). That requires kvm->srcu (or
kvm->slots_lock) to be held, otherwise a concurrent memslot update can
free the memslots array under us once its SRCU grace period has elapsed.
As this is not fast path, following lock ordering (mutex first, then
srcu) take the big hammer and hold the srcu for the full import. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: keyop: use mmu_lock to read gmap->asce
Every other dat_* consumer in this file (kvm_s390_get_skeys,
set_skeys, get_cmma_bits, set_cmma_bits, MEM_CLR_CMMA,
kvm_s390_fixup_prefix, kvm_test_age_gfn, kvm_age_gfn) reads
kvm->arch.gmap->asce *inside* the mmu_lock read-side. keyop is the only
outlier.
gmap->asce is mutated under write_lock(mmu_lock) by gmap_set_limit()
and keyop might use a stale asce value for walking as KVM_S390_KEYOP
and KVM_S390_VM_MEM_LIMIT_SIZE can run concurrently. This can result
in memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix acpi_package_ids[] array overflow
With LoongArch virt machine, a typical setting is one core per socket,
there will max 256 sockets (packages) on one VM. With PPTT acpi table,
array acpi_package_ids[] will be overflowed.
Here change the array size of acpi_package_ids[] with the max value of
MAX_PACKAGES and KVM_MAX_VCPUS. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov7740: fix use-after-destroy in remove
The ov7740_remove() function had a severe teardown order bug where it
destroyed the driver's mutex before freeing the V4L2 control handler
which relies on that mutex, leading to a use-after-destroy kernel panic.
Furthermore, the driver explicitly called v4l2_ctrl_handler_free() and
mutex_destroy() sequentially, but then called ov7740_free_controls()
which invokes both of them a second time, resulting in a double-free.
This patch fixes the issue by unregistering the subdevice first, and
relying exclusively on ov7740_free_controls() to safely tear down the
mutex and control handler in the correct order. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rkvdec: hevc: guard INTER_REF_PIC_SET_PRED index underflow
st_ref_pic_set_prediction() computes the reference RPS index as
st_rps_idx - (delta_idx_minus1 + 1) per HEVC spec equation 7-59.
Both operands are u8, so when delta_idx_minus1 + 1 exceeds the
current index the subtraction wraps and the subsequent array access
at calculated_rps_st_sets[ref_rps_idx] reads far out of bounds.
A userspace V4L2 client that can open the RKVDEC m2m decoder can
submit an EXT_SPS_ST_RPS control with INTER_REF_PIC_SET_PRED set
and delta_idx_minus1 crafted to trigger the underflow.
Reject the entry early when the reference index would underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
media: zoran: Avoid freeing a registered video_device twice
zoran_init_video_device() installs zoran_vdev_release() as the
video_device release callback through zoran_template. After
video_register_device() succeeds, video_unregister_device() drops the
registered video_device reference and the V4L2 core eventually invokes
that release callback, which kfree()s the video_device.
zoran_exit_video_devices() called video_unregister_device() and then
kfree(zr->video_dev), so device teardown could free the same
video_device twice.
Remove the direct kfree() and clear the cached pointer after
unregistering. The pre-registration failure path keeps its manual free
because the video_device was not registered there.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Quiesce response IRQ before freeing request queue
qla2xxx_delete_qpair() deletes the request queue before the response
queue. qla25xx_delete_req_que() frees the request queue memory
(kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is
only released later, in qla25xx_free_rsp_que(). In that window the
response interrupt can still fire, qla2xxx_msix_rsp_q() queues
qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue()
dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the
status path), a use-after-free.
The cancel_work_sync() added for the qpair teardown lives in the
response free path, which runs after the request queue is already freed,
so it does not protect rsp->req.
Release the response-queue interrupt and flush qpair->q_work before
deleting the request queue, so no late completion can reach the freed
request queue. Clearing have_irq makes the subsequent
qla25xx_free_rsp_que() skip its free_irq(), and the firmware
queue-delete order (request then response) is preserved; the
request-delete mailbox completes on the default vector and is unaffected
by dropping the qpair response interrupt early. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Avoid double completion in async IOCB timeout
qla2x00_async_iocb_timeout() tries to abort a timed-out async IOCB. When
qla24xx_async_abort_cmd() fails, both the SRB_LOGIN_CMD path and the
SRB_CTRL_VP/default path scan outstanding_cmds[] for the SRB and then
call sp->done(sp, QLA_FUNCTION_TIMEOUT) unconditionally, without checking
whether the SRB was actually found and removed.
If the response ISR completes the same handle first, it removes the SRB
under qp_lock_ptr and runs sp->done() -> complete(sp->comp). The
submitter qla24xx_control_vp() wakes from wait_for_completion(), clears
sp->comp, drops its reference and returns, reclaiming the on-stack
completion. The timer reference keeps the SRB alive across the timeout
handler, but not the submitter's stack. The timeout then issues a second
sp->done() -> qla_ctrlvp_sp_done(), which evaluates "if (sp->comp)
complete(sp->comp)"; with the pointer loaded before the submitter's NULL
store, complete() writes into the freed stack frame, a use-after-free.
Track whether this path removed the SRB from outstanding_cmds and only
call sp->done() when it did, so the command is completed exactly once by
whichever path owns it. This mirrors the sp_found guard already used in
qla24xx_abort_iocb_timeout(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Hold vport_slock for host map update in report ID acquisition
qla24xx_report_id_acquisition() format-1 handling drops vport_slock after
taking the vport reference and then calls qla_update_host_map() without
the lock. That reaches qla_update_vp_map(), which mutates the ha->host_map
btree via btree_insert32()/btree_update32()/btree_remove32() and is
documented to require vport_slock to be held by the caller. Running it
unlocked can race concurrent host_map updates and corrupt the btree.
The format-2 path in the same function already wraps its host_map update
(SET_AL_PA) in vport_slock; the format-1 path is the lone outlier.
Hold vport_slock across the format-1 qla_update_host_map() call to honor
the documented locking contract. The vref_count taken in the loop keeps
the vport valid, so this only adds the missing host_map serialization. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix folio_nr_pages() race after put in large folio invalidate
Our v6.18 based Android system is continuely suffering livelock and bad
page stat as shown in[1] which related to broken xarray slot status. By
investigating big folio operations within f2fs, we find below races and
fix it by get the nr_pages before drop the refcount and folio_lock.
f2fs_get_read_data_folio() calls f2fs_folio_put() before
folio_nr_pages() when invalidating a large folio from the page cache.
That unlocks the folio and drops the caller reference, leaving a window
where a concurrent truncate or folio split can shrink the compound folio
or free it before the invalidate range is computed. An undersized range
then leaves split sub-folios in mapping->i_pages, which can later
interact badly with truncate and reclaim (stale xarray entries and bad
page state when folio->mapping no longer matches the mapping being
truncated).
[1]
PID: 2594 TASK: ffffff8169b81580 CPU: 7 COMMAND: "Thread-3"
#0 [ffffffc08ef2b8a0] xas_load at ffffffe52d1f42a4
#1 [ffffffc08ef2b900] find_get_entries at ffffffe52c185798
#2 [ffffffc08ef2bb60] truncate_inode_pages_range at ffffffe52c19e83c
#3 [ffffffc08ef2bbc0] truncate_inode_pages_final at ffffffe52c19ec2c
#4 [ffffffc08ef2bc20] f2fs_evict_inode at ffffffe52c4c8400
#5 [ffffffc08ef2bcc0] evict at ffffffe52c2de9f4
#6 [ffffffc08ef2bd00] iput at ffffffe52c2db1b4
#7 [ffffffc08ef2bd30] dentry_unlink_inode at ffffffe52c2d7204
#8 [ffffffc08ef2bd50] __dentry_kill at ffffffe52c2d3dcc
#9 [ffffffc08ef2bd80] dput at ffffffe52c2d3c3c
#10 [ffffffc08ef2bda0] __fput at ffffffe52c2b0a7c
#11 [ffffffc08ef2bde0] ____fput at ffffffe52c2b1034
#12 [ffffffc08ef2bdf0] task_work_run at ffffffe52beea200
#13 [ffffffc08ef2be20] exit_to_user_mode_loop at ffffffe52bfbc17c
#14 [ffffffc08ef2be80] el0_svc at ffffffe52d1f8e54
#15 [ffffffc08ef2beb0] el0t_64_sync_handler at ffffffe52d1f8d10 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to pass folio->index to f2fs_sanity_check_node_footer()
Otherwise in f2fs_sanity_check_node_footer(), it will check the
same nid incorrectly. |
