| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The BFD daemon in Juniper Junos OS 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R10, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R8, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X50 before 14.1X50-D85, 14.1X55 before 14.1X55-D20, 14.2 before 14.2R3, 15.1 before 15.1R1, and 15.1X49 before 15.1X49-D10 allows remote attackers to cause a denial of service (bfdd crash and restart) or execute arbitrary code via a crafted BFD packet. |
| The stateless firewall in Juniper Junos 13.3R3, 14.1R1, and 14.1R2, when using Trio-based PFE modules, does not properly match ports, which might allow remote attackers to bypass firewall rule. |
| Juniper chassis with Trio (Trinity) chipset line cards and Junos OS 13.3 before 13.3R8, 14.1 before 14.1R6, 14.2 before 14.2R5, and 15.1 before 15.1R2 allow remote attackers to cause a denial of service (MPC line card crash) via a crafted uBFD packet. |
| The PFE daemon in Juniper vSRX virtual firewalls with Junos OS before 15.1X49-D20 allows remote attackers to cause a denial of service via an unspecified connection request to the "host-OS." |
| The Juniper MX Series routers with Junos 13.3R3 through 13.3Rx before 13.3R6, 14.1 before 14.1R4, 14.1X50 before 14.1X50-D70, and 14.2 before 14.2R2, when configured as a broadband edge (BBE) router, allows remote attackers to cause a denial of service (jpppd crash and restart) by sending a crafted PAP Authenticate-Request after the PPPoE Discovery and LCP phase are complete. |
| Juniper Junos OS before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R7, 13.2X51 before 13.2X51-D35, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X50 before 14.1X50-D105, 14.1X51 before 14.1X51-D70, 14.1X53 before 14.1X53-D25, 14.1X55 before 14.1X55-D20, 14.2 before 14.2R1, 15.1 before 15.1F2 or 15.1R1, and 15.1X49 before 15.1X49-D10 does not require a password for the root user when pam.conf is "corrupted," which allows local users to gain root privileges by modifying the file. |
| The SSH server in Juniper Junos OS before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R10, 12.3X48 before 12.3X48-D10, 13.2 before 13.2R8, 13.2X51 before 13.2X51-D35, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X53 before 14.1X53-D25, 14.2 before 14.2R3, 15.1 before 15.1R1, and 15.1X49 before 15.1X49-D20 allows remote attackers to cause a denial of service (CPU consumption) via unspecified SSH traffic. |
| Juniper Junos OS 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D10, 13.2 before 13.2R7, 13.3 before 13.3R5, 14.1R3 before 14.1R3-S2, 14.1 before 14.1R4, 14.2 before 14.2R2, and 15.1 before 15.1R1 allows remote attackers to cause a denial of service (NULL pointer dereference and RDP crash) via a large number of BGP-VPLS advertisements with updated BGP local preference values. |
| Juniper Junos OS 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R7, 13.2X51 before 13.2X51-D35, 13.2X52 before 13.2X52-D25, 13.3 before 13.3R6, 14.1R3 before 14.1R3-S2, 14.1 before 14.1R4, 14.1X53 before 14.1X53-D12, 14.1X53 before 14.1X53-D16, 14.1X55 before 14.1X55-D25, 14.2 before 14.2R2, and 15.1 before 15.1R1 allows remote attackers to cause a denial of service (mbuf and connection consumption and restart) via a large number of requests that trigger a TCP connection to move to the LAST_ACK state when there is more data to send. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on SRX Series, and MX Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When an affected device receives specific valid TCP traffic, the pfe crashes and restarts leading to a momentary but complete service outage.
This issue affects Junos OS:
21.2 releases from 21.2R3-S5 before 21.2R3-S6.
This issue does not affect earlier or later releases. |
| A Use After Free vulnerability in command processing of Juniper Networks Junos OS on MX Series allows a local, authenticated attacker to cause the broadband edge service manager daemon (bbe-smgd) to crash upon execution of specific CLI commands, creating a Denial of Service (DoS) condition. The process crashes and restarts automatically.
When specific CLI commands are executed, the bbe-smgd daemon attempts to write into an area of memory (mgd socket) that was already closed, causing the process to crash. This process manages and controls the configuration of broadband subscriber sessions and services. While the process is unavailable, additional subscribers will not be able to connect to the device, causing a temporary Denial of Service condition.
This issue only occurs if Graceful Routing Engine Switchover (GRES) and Subscriber Management are enabled.
This issue affects Junos OS:
* All versions before 20.4R3-S5,
* from 21.1 before 21.1R3-S4,
* from 21.2 before 21.2R3-S3,
* from 21.3 before 21.3R3-S5,
* from 21.4 before 21.4R3-S5,
* from 22.1 before 22.1R3,
* from 22.2 before 22.2R3,
* from 22.3 before 22.3R2; |
| A Missing Release of Memory after Effective Lifetime vulnerability in Juniper Networks Junos OS on MX Series allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS).
In a subscriber management scenario continuous subscriber logins will trigger a memory leak and eventually lead to an FPC crash and restart.
This issue affects Junos OS on MX Series:
* All version before 21.2R3-S6,
* 21.4 versions before 21.4R3-S6,
* 22.1 versions before 22.1R3-S5,
* 22.2 versions before 22.2R3-S3,
* 22.3 versions before 22.3R3-S2,
* 22.4 versions before 22.4R3,
* 23.2 versions before 23.2R2. |
| A Missing Authentication for Critical Function vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated network-based attacker to cause limited impact to the integrity or availability of the device.
If a device is configured with IPsec authentication algorithm hmac-sha-384 or hmac-sha-512, tunnels are established normally but for traffic traversing the tunnel no authentication information is sent with the encrypted data on egress, and no authentication information is expected on ingress. So if the peer is an unaffected device transit traffic is going to fail in both directions. If the peer is an also affected device transit traffic works, but without authentication, and configuration and CLI operational commands indicate authentication is performed.
This issue affects Junos OS:
* All versions before 20.4R3-S7,
* 21.1 versions before 21.1R3,
* 21.2 versions before 21.2R2-S1, 21.2R3,
* 21.3 versions before 21.3R1-S2, 21.3R2. |
| Juniper Junos 10.4 before 10.4S13, 11.4 before 11.4R7-S1, 12.1 before 12.1R5-S3, 12.1X44 before 12.1X44-D20, and 12.1X45 before 12.1X45-D10 on the SRX1400, SRX3400, and SRX3600 does not properly initialize memory locations used during padding of Ethernet packets, which allows remote attackers to obtain sensitive information by reading packet data, aka PR 829536, a related issue to CVE-2003-0001. |
| J-Web in Juniper Junos before 10.4R13, 11.4 before 11.4R7, 12.1R before 12.1R6, 12.1X44 before 12.1X44-D15, 12.1x45 before 12.1X45-D10, 12.2 before 12.2R3, 12.3 before 12.3R2, and 13.1 before 13.1R3 allow remote attackers to bypass the cross-site request forgery (CSRF) protection mechanism and hijack the authentication of administrators for requests that (1) create new administrator accounts or (2) have other unspecified impacts. |
| The kernel in Juniper Junos 10.4 before 10.4R14, 11.4 before 11.4R8, 11.4X27 before 11.4X27.43, 12.1 before 12.1R6, 12.1X44 before 12.1X44-D20, 12.2 before 12.2R4, and 12.3 before 12.3R2, in certain VLAN configurations with unrestricted arp-resp and proxy-arp settings, allows remote attackers to cause a denial of service (device crash) via a crafted ARP request, aka PR 842091. |
| flowd in Juniper Junos 10.4 before 10.4S14, 11.2 and 11.4 before 11.4R6-S2, and 12.1 before 12.1R6 on SRX devices, when certain Application Layer Gateways (ALGs) are enabled, allows remote attackers to cause a denial of service (daemon crash) via crafted TCP packets, aka PRs 727980, 806269, and 835593. |
| flowd in Juniper Junos 10.4 before 10.4S14, 11.4 before 11.4R8, 12.1 before 12.1R7, and 12.1X44 before 12.1X44-D15 on SRX devices, when PIM and NAT are enabled, allows remote attackers to cause a denial of service (daemon crash) via crafted PIM packets, aka PR 842253. |
| The OSPF implementation in Juniper Junos through 13.x, JunosE, and ScreenOS through 6.3.x does not consider the possibility of duplicate Link State ID values in Link State Advertisement (LSA) packets before performing operations on the LSA database, which allows remote attackers to cause a denial of service (routing disruption) or obtain sensitive packet information via a crafted LSA packet, a related issue to CVE-2013-0149. |
| jsdm/ajax/port.php in J-Web in Juniper Junos before 10.4R13, 11.4 before 11.4R7, 12.1 before 12.1R5, 12.2 before 12.2R3, and 12.3 before 12.3R1 allows remote authenticated users to execute arbitrary commands via the rsargs parameter in an exec action. |
