| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Free init resources if kvm_init() fails
kvm_loongarch_init() calls kvm_loongarch_env_init() to allocate the
per-CPU kvm_context (vmcs) and kvm_loongarch_ops and to register the
perf callbacks, and then calls kvm_init(). If kvm_init() fails its
result is returned directly, but since module_init() does not run the
module_exit() stuff on failure, so kvm_loongarch_env_exit() is never
called and those resources are leaked.
So call kvm_loongarch_env_exit() when kvm_init() fails, matching the
teardown-on-failure pattern used by riscv_kvm_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: cobalt: Avoid freeing ALSA private data twice
snd_cobalt_card_create() stores cobsc in sc->private_data and installs
snd_cobalt_card_private_free() as sc->private_free. From that point,
snd_card_free(sc) releases cobsc through the ALSA card cleanup path.
If cobalt_alsa_init() fails after snd_cobalt_card_create(), the
err_exit_free path calls snd_card_free(sc) and then kfree(cobsc). That
second free releases the same object again.
Remove the explicit kfree(cobsc) and leave ownership with the ALSA card.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: defer audio-only extension registration
The audio-only path registers extensions while probing the primary device.
For a dual-TS board, this happens before dev_next is created. The duplicate
device inherits is_audio_only and is then independently inserted into
em28xx_devlist.
The list is intended to contain only primary devices: extension operations
reach the secondary device through dev_next. The independently linked
secondary can be freed during disconnect while its list node remains
reachable, resulting in a use-after-free.
Defer audio-only extension registration to the module-request work item. It
runs only after probing has completed construction of the optional
secondary device, so only the primary is registered and extension callbacks
reach the secondary through dev_next. |
| In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: fix use-after-free of dev_next->devlist on disconnect
When a device with has_dual_ts=1 is probed and the is_audio_only path
is taken, both dev and dev->dev_next are added to the global
em28xx_devlist via em28xx_init_extension(). However, during disconnect,
em28xx_close_extension(dev) only calls list_del(&dev->devlist), leaving
dev->dev_next->devlist still linked in the global list. When dev_next is
subsequently freed via kref_put(), its devlist entry becomes a dangling
pointer in em28xx_devlist. The next device probe that calls
em28xx_init_extension() triggers a list corruption BUG when list_add_tail
detects the freed node.
This bug was exposed by commit a368ecde8a50 ("USB: core: Fix duplicate
endpoint bug by clearing reserved bits in the descriptor") which clears
reserved bits in bEndpointAddress during endpoint parsing. This causes
fuzzed endpoint addresses like 0xf3 to be normalized to 0x83, which
em28xx interprets as a vendor audio endpoint, enabling the
is_audio_only + has_dual_ts code path that was previously unreachable
with such descriptors.
Fix this by removing dev->dev_next->devlist from the global list in
em28xx_close_extension() before the device is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: imx415: Release runtime PM reference on VBLANK error
The VBLANK path returned immediately when programming VMAX failed after
pm_runtime_get_if_in_use() had taken a runtime PM reference. Break out of
the switch instead so the common pm_runtime_put() path is used. |
| In the Linux kernel, the following vulnerability has been resolved:
media: intel/ipu6: fix async notifier cleanup leak on parse error
isys_notifier_init() calls v4l2_async_nf_init() and then adds fwnode
remote subdevs in a loop with v4l2_async_nf_add_fwnode_remote(). If an
endpoint parse or add fails partway through the loop, it jumps to
err_parse and returns without calling v4l2_async_nf_cleanup(), leaking
every v4l2_async_connection already added to the notifier's waiting
list.
The register-failure path just below already cleans up correctly, and
the caller only tears the notifier down (isys_notifier_cleanup()) once
isys_notifier_init() has returned success. Clean up the notifier on the
parse error path too. |
| In the Linux kernel, the following vulnerability has been resolved:
media: platform: mtk-mdp3: fix NULL deref on failed SCP lookup
Add the missing sanity check after looking up the SCP to avoid
dereferencing a NULL-pointer in case its driver has not yet been bound. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-fwnode: Fix fwnode leak in v4l2_fwnode_parse_link
In v4l2_fwnode_parse_link(), the remote endpoint fwnode reference is
acquired using fwnode_graph_get_remote_endpoint(). This reference is
properly released in the error paths, but it is leaked on the success
path.
Add the missing fwnode_handle_put() before returning 0 to prevent the
reference leak.
[Sakari Ailus: Fix subject prefix and coding style a little.] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE
(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not
zero the allocation. They initialize only a few leading bytes before
handing the buffer to qla2x00_write_sfp().
qla2x00_write_sfp() can override the transfer length with a user-supplied
value:
if (len == 1)
opt |= BIT_0;
if (opt & BIT_0)
len = *sfp;
*sfp is the first byte of the (user-controlled) payload, so len can grow
up to 255. The device then DMA-reads len bytes from the 256-byte pool
buffer. Since only a small prefix was written
(e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU
status register), the hardware reads past the initialized region and
writes up to ~219 bytes of stale DMA-pool heap memory to the device
flash.
Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers
so any bytes beyond the initialized data are zero rather than stale heap
contents. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
struct qla_i2c_access carries a 16-bit length field alongside a fixed
64-byte buffer:
struct qla_i2c_access {
uint16_t device, offset, option, length;
uint8_t buffer[0x40];
} __packed;
qla2x00_write_i2c() and qla2x00_read_i2c() use the user-supplied
i2c->length without any bounds check. i2c is overlaid on a 256-byte
on-stack buffer and sfp is a 256-byte DMA-pool buffer, so a length up to
65535 overruns both:
- write: memcpy(sfp, i2c->buffer, i2c->length) over-reads the stack and
over-writes the sfp heap buffer, and qla2x00_write_sfp() then DMAs
i2c->length bytes out of the 256-byte buffer.
- read: qla2x00_read_sfp() DMAs i2c->length bytes into the 256-byte sfp,
then memcpy(i2c->buffer, sfp, i2c->length) overflows the 64-byte
buffer inside the on-stack array.
A caller holding CAP_SYS_RAWIO can use this to corrupt the heap and the
kernel stack. Reject requests whose length exceeds the buffer before any
copy or DMA transfer in both handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix BSG job leak on validate flash image error path
qla28xx_validate_flash_image() returns QLA_SUCCESS (0) unconditionally,
telling the FC BSG transport (fc_bsg_host_dispatch()) that the driver
owns and will complete the request. But bsg_job_done() is guarded by "if
(!rval)", so on the error path (rval == -EINVAL) neither the driver nor
the transport completes the job. The request dangles until it times out,
leaking block layer resources.
Commit c2c68225b145 ("scsi: qla2xxx: Fix bsg_done() causing double
free") added the "if (!rval)" guard to a batch of BSG handlers. That is
correct for handlers that also return the error code (the transport then
completes the job once via fail_host_msg), but this function returns
QLA_SUCCESS unconditionally, so the guard turned a correct single
completion into a leak.
Always call bsg_job_done(): bsg_reply->result is DID_OK and the error is
reported in vendor_rsp[0], and since the function returns 0 the
transport will not complete the job a second time. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
qla2x00_update_fru_versions() copies the user-supplied BSG request into
a fixed 256-byte stack buffer (bsg[DMA_POOL_SIZE]) and then iterates
list->count times over the qla_image_version array embedded in that
buffer, advancing the image pointer each iteration. count is taken
directly from user input with no upper bound, while only (DMA_POOL_SIZE
- sizeof(list->count)) / sizeof(struct qla_image_version) = 6 entries
actually fit. A larger count walks the image pointer off the end of the
stack buffer, reading adjacent kernel stack memory and sending it to the
device via qla2x00_write_sfp().
Reject requests whose declared count does not fit in the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize flash version read in reset handler
The "update cache versions without reset" sysfs reset operation (0x20261)
calls get_flash_version(), which reads hardware flash registers, without
holding ha->optrom_mutex. The VPD update path serializes the same call
under optrom_mutex, so this reset path can interleave its flash register
accesses with a concurrent VPD or optrom flash operation and corrupt the
reads.
Hold ha->optrom_mutex across the get_flash_version() call to match the
VPD update path. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix FCE trace use-after-free during firmware dump
qla2x00_free_fce_trace() freed and cleared ha->fce while holding only
fce_mutex. The firmware-dump consumers qla27xx_fwdt_entry_t264() and
qla25xx_copy_fce() read ha->fce (NULL check followed by a copy of the
buffer) under hardware_lock and never take fce_mutex. A debugfs FCE
disable could therefore free the DMA buffer between a dump's NULL check
and its copy, resulting in a use-after-free.
Unpublish ha->fce under hardware_lock, then release the lock and free
the DMA buffer (dma_free_coherent() may sleep). A concurrent dump either
completes its check and copy with the buffer still valid, or observes
ha->fce == NULL and skips it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix FCE trace enable parsing in debugfs
qla2x00_dfs_fce_write() called kstrtoul() with a NULL result pointer,
so a successful parse would dereference NULL and oops. Worse, the int
return value (0 on success, negative errno on failure) was assigned to
the unsigned long enable flag, inverting the intended logic: a valid
number was treated as "disable" while a parse failure enabled FCE.
Parse the value into enable and propagate parse errors to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Don't query firmware state while chip is down
qla2x00_fw_state_show() initializes rval to QLA_FUNCTION_FAILED and jumps
to the out: label when the chip is down or EEH is busy. The out: block
then re-issued qla2x00_get_firmware_state() because rval != QLA_SUCCESS,
defeating the chip-down/EEH-busy guards and issuing a mailbox command
(outside optrom_mutex) during ISP reset or PCI error recovery, which can
hang the adapter. It also turned a normal in-lock mailbox failure into a
second unsynchronized mailbox attempt.
Make the out: fallback only mark the firmware state as unknown. The
mailbox is now issued at most once, inside optrom_mutex, and only when
the chip is up and not EEH-busy. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak
Several bsg handlers stage their request/reply in an uninitialized 256-byte
on-stack buffer (uint8_t bsg[DMA_POOL_SIZE]) and fill it via
sg_copy_to_buffer(), which only copies as many bytes as the user-supplied
request payload. When the request is shorter than the structure, the
remainder of the buffer is left holding stale stack data.
qla2x00_read_fru_status() and qla2x00_read_i2c() then copy the full
structure back to the reply payload with sg_copy_from_buffer(), leaking the
uninitialized stack bytes to user space. The write/update paths do not copy
the buffer back, but can feed uninitialized fields to the device.
Zero the stack buffer at declaration in all five handlers, mirroring the
heap kzalloc() approach, so short requests can no longer expose stale
memory. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started
qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not
started (!ha->flags.fw_started), but the out: path unconditionally calls
qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an
unconditional doorbell write to the request queue in-pointer register.
This rings the firmware doorbell and queues an IOCB that stopped or
resetting firmware cannot consume, and touches MMIO during the reset/EEH
window where fw_started is also clear.
Only emit the LS reject IOCB (and ring the doorbell) when fw_started is
set; otherwise just clean up and return. The post-allocation failure
cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started
and still send the reject. Apply the same guard to the reject emission
in qla2xxx_process_purls_pkt(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: use the mount idmap for the owner check in f2fs_xattr_advise_set()
f2fs_xattr_advise_set() calls inode_owner_or_capable() with &nop_mnt_idmap
before allowing the "system.advise" xattr to be set, instead of the idmap
that the VFS passes to the ->set() handler.
f2fs supports idmapped mounts, so on such a mount this checks the caller's
fsuid against the unmapped on-disk owner rather than the mapped owner: the
actual owner can be wrongly denied with -EPERM and an unrelated caller
wrongly allowed. Pass the handler's idmap instead. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix dentry folio leak in find_in_level
find_in_level() gets a dentry folio with f2fs_find_data_folio() before
calling find_in_block(). If find_in_block() returns an error, the
function stores the error in res_folio and breaks out of the loop without
dropping the dentry folio.
This leaks the folio reference on the find_in_block() error path. Drop
the dentry folio before returning the error to the caller. |
