| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs: Fix use-after-free in path file creation cleanup
In the error path of rtrs_srv_create_path_files(), the sysfs root folders
may already have been created and srv_path->kobj may already have been
initialized. If a later step fails, the cleanup currently calls
kobject_put(&srv_path->kobj) before
rtrs_srv_destroy_once_sysfs_root_folders(srv_path).
kobject_put() may drop the last reference to srv_path->kobj and invoke the
release callback, rtrs_srv_release(), which frees srv_path. The following
call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then
dereferences srv_path internally to access srv_path->srv, resulting in a
use-after-free.
This failure path is reached before rtrs_srv_create_path_files() returns
success, so the successful-path lifetime handling is not involved.
Fix this by destroying the sysfs root folders before calling
kobject_put(&srv_path->kobj), so srv_path is still valid while the helper
accesses it.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer
In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from
DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp()
re-reads the same field from the same DMA buffer for test_bit() and
pointer arithmetic.
DMA-coherent memory is mapped uncacheable on x86 and is shared,
unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes
directly to host-visible memory. A H/W can modify the value
between the check and the use, bypassing the bounds validation.
Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a
stack-local variable in mana_hwc_rx_event_handler(), and passing the
validated value as a parameter to mana_hwc_handle_resp(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: phy: avoid NULL deref when PHY driver is unbound
phydev->drv can become NULL while the phy_device is still attached to
its net_device, namely after the PHY driver is unbound via sysfs:
echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind
phy_remove() clears phydev->drv but doesn't call phy_detach(), so the
phy_device stays in the link topology xarray and ethnl_req_get_phydev()
still hands it back. ETHTOOL_MSG_PHY_GET then oopses on:
rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL);
drvname is already treated as optional by phy_reply_size(),
phy_fill_reply() and phy_cleanup_data(), so just skip the allocation
when there is no driver bound. |
| The Tenda TX9 V22.03.02.05 firmware has a stack overflow vulnerability in the sub_4418CC function of the file /goform/SetNetControlList. |
| Apache Neethi is vulnerable to uncontrolled recursion when parsing policies that lack policy Ids or with deeply nested structures, which may lead to a denial of service attack when parsing policies due to runtime memory exhaustion. Users are recommended to upgrade to version 3.2.3, which fixes this issue. |
| DOMPurify before 3.4.12 fails to execute afterSanitizeElements hook for custom elements allowed via CUSTOM_ELEMENT_HANDLING.tagNameCheck, allowing attributes to bypass application security policies. Attackers can preserve sensitive attributes on custom elements that later re-inject them into innerHTML sinks, creating second-order XSS gadgets. |
| The Zephyr ext2 file system validates the on-disk superblock in ext2_verify_disk_superblock() (subsys/fs/ext2/ext2_impl.c) before completing a mount. The validator checked the magic number, block size, revision and feature flags, but did not verify that the on-disk fields s_blocks_per_group and s_inodes_per_group are non-zero. Both fields are read directly from the image and are later used as divisors during mount-time initialization.
During mount, get_ngroups() divides and modulos s_blocks_count by s_blocks_per_group (reached via ext2_fetch_block_group() from ext2_init_fs()), and get_itable_entry() divides (ino - 1) by s_inodes_per_group when fetching the root inode (both in subsys/fs/ext2/ext2_diskops.c). A superblock with either field set to zero therefore causes an integer division by zero during the mount sequence.
An attacker who can present a crafted ext2 image to a device that mounts ext2 — removable media such as an SD card or a USB mass-storage device — can trigger this. On ARMv7-M / ARMv8-M-mainline Cortex-M targets, divide-by-zero trapping is enabled (SCB_CCR_DIV_0_TRP), so the division raises a UsageFault that Zephyr treats as a fatal error, producing a denial of service. The impact is limited to availability; the malformed value is consumed only as a divisor.
The fix rejects a zero s_blocks_per_group or s_inodes_per_group in the superblock validator, returning -EINVAL so the mount fails before any block-group or inode I/O occurs. |
| The Easy Appointments plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check and missing nonce verification on the `ea_delete_multiple_connections` AJAX action in all versions up to, and including, 3.12.27. This makes it possible for authenticated attackers, with Contributor-level access and above, to delete arbitrary connection records from the `wp_ea_connections` table, disrupting the plugin's core booking functionality. |
| The WP Encryption – One Click Free SSL Certificate & SSL / HTTPS Redirect, Security & SSL Scan plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 7.8.6.6 via the 'imploded' parameter parameter. This makes it possible for authenticated attackers, with administrator-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. Although file write content is passed through esc_html(), which encodes angle brackets and prevents direct PHP execution, plaintext configuration files such as .htaccess are fully writable and exploitable for denial-of-service or redirect attacks. This is only exploitable when the premium version of the software is enabled and active. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: fix deadlock on shared proxy's parent removal
Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set")
used the mutex embedded in struct gpio_shared_entry to protect the
offset field which now can be modified after assignment. The critical
section however is too wide and introduced a potential deadlock on the
removal of the shared GPIO proxy's parent.
Make the critical section shorter - only protect the offset when it's
being read.
While at it: mention the fact that the entry lock is now also used to
protect against concurrent access to the offset field in the structure's
documentation. |
| An issue in aiflowy <= 2.1.2 allows a remote attacker to obtain sensitive information via the JobUtil.java file. |
| The Ninja Forms – The Contact Form Builder That Grows With You plugin for WordPress is vulnerable to generic SQL Injection via Import File 'settings' Key in all versions up to, and including, 3.14.9 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The vulnerable keys originate from the 'settings' object in an attacker-controlled import file processed via file_get_contents() or base64-decoded/JSON-decoded blobs, bypassing wp_magic_quotes protections entirely; two distinct sinks are affected — _save_setting() in Model.php and insert_form_meta() in ImportForm.php — as only the value side is escaped while the key side receives no sanitization or parameterization at any point in the call chain. |
| Out-of-bounds Write, Integer Underflow (Wrap or Wraparound) vulnerability in Apache NimBLE BASS service.
Improper validation when parsing BASS service "Add Source" and "Modify Source" operation PDU could results in stack buffer overflow or arbitrary out-of-bound read.
This can be triggered by nearby devices over Bluetooth connection, however pairing is required prior to accessing BASS service, which depending on device configuration may or may not require user action.
This issue affects Apache NimBLE: through 1.9.0.
Users are recommended to upgrade to version 1.10.0, which fixes the issue. |
| The Brands for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'width' Shortcode Attribute in all versions up to, and including, 3.8.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Nexter Blocks – Gutenberg Blocks, Page Builder & AI Website Builder plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 5.0.0 via the 'plus_name' parameter. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete arbitrary JS/CSS files on the server, which can lead to denial of service or destruction of critical plugin and theme assets. |
| Improper authentication in Microsoft Exchange Online allows an unauthorized attacker to perform tampering over a network. |
| Exposure of sensitive information to an unauthorized actor in Microsoft Graph allows an authorized attacker to disclose information over a network. |
| An unauthenticated attacker could trigger an Out of Memory condition to crash the Java process for RHCS by repeatedly sending HTTP requests to the TLS endpoint. Depending on how the RHCS server is configured, a manual intervention to restart it may prove necessary. |
| Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. Versions prior to 3.31.0 ship with a default configuration that allows pod creators to inject arbitrary command-line arguments into the virtiofsd process through the `io.katacontainers.config.hypervisor.virtio_fs_extra_args` pod annotation. By injecting `-o source=/` along with `--no-announce-submounts` and `--sandbox=none`, an attacker can override the virtiofsd shared directory to serve the entire host root filesystem into the guest VM. Combined with the `kernel_params` annotation (also enabled by default) to activate the agent debug console, the attacker can mount the host filesystem from inside the VM and read or write any file on the host, including /etc/shadow. Version 3.31.0 patches the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: igorplugusb: fix control request setup packet
Commit eac69475b01f ("media: rc: igorplugusb: heed coherency
rules") changed the control request storage from an embedded struct to
an allocated pointer so it can obey DMA coherency rules.
However, the driver still passes &ir->request to usb_fill_control_urb().
That points the URB setup packet at the pointer field itself rather than
at the allocated struct usb_ctrlrequest.
USB core then interprets pointer bytes as the setup packet. This can
produce an invalid bRequestType and trigger the control direction warning
reported by syzbot:
usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0
Pass ir->request itself as the setup packet. |
