Export limit exceeded: 10815 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10815 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47315 | 1 Linux | 1 Linux Kernel | 2025-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: memory: fsl_ifc: fix leak of IO mapping on probe failure On probe error the driver should unmap the IO memory. Smatch reports: drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298. | ||||
| CVE-2021-47322 | 1 Linux | 1 Linux Kernel | 2025-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT Fix an Oopsable condition in pnfs_mark_request_commit() when we're putting a set of writes on the commit list to reschedule them after a failed pNFS attempt. | ||||
| CVE-2021-47317 | 1 Linux | 1 Linux Kernel | 2025-05-12 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf: Fix detecting BPF atomic instructions Commit 91c960b0056672 ("bpf: Rename BPF_XADD and prepare to encode other atomics in .imm") converted BPF_XADD to BPF_ATOMIC and added a way to distinguish instructions based on the immediate field. Existing JIT implementations were updated to check for the immediate field and to reject programs utilizing anything more than BPF_ADD (such as BPF_FETCH) in the immediate field. However, the check added to powerpc64 JIT did not look at the correct BPF instruction. Due to this, such programs would be accepted and incorrectly JIT'ed resulting in soft lockups, as seen with the atomic bounds test. Fix this by looking at the correct immediate value. | ||||
| CVE-2021-47351 | 1 Linux | 1 Linux Kernel | 2025-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix races between xattr_{set|get} and listxattr operations UBIFS may occur some problems with concurrent xattr_{set|get} and listxattr operations, such as assertion failure, memory corruption, stale xattr value[1]. Fix it by importing a new rw-lock in @ubifs_inode to serilize write operations on xattr, concurrent read operations are still effective, just like ext4. [1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com | ||||
| CVE-2021-47370 | 1 Linux | 1 Linux Kernel | 2025-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure tx skbs always have the MPTCP ext Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension. | ||||
| CVE-2025-4143 | 1 Cloudflare | 1 Workers-oauth-provider | 2025-05-12 | 6.1 Medium |
| The OAuth implementation in workers-oauth-provider that is part of MCP framework https://github.com/cloudflare/workers-mcp , did not correctly validate that redirect_uri was on the allowed list of redirect URIs for the given client registration. Fixed in: https://github.com/cloudflare/workers-oauth-provider/pull/26 https://github.com/cloudflare/workers-oauth-provider/pull/26 Impact: Under certain circumstances (see below), if a victim had previously authorized with a server built on workers-oath-provider, and an attacker could later trick the victim into visiting a malicious web site, then attacker could potentially steal the victim's credentials to the same OAuth server and subsequently impersonate them. In order for the attack to be possible, the OAuth server's authorized callback must be designed to auto-approve authorizations that appear to come from an OAuth client that the victim has authorized previously. The authorization flow is not implemented by workers-oauth-provider; it is up to the application built on top to decide whether to implement such automatic re-authorization. However, many applications do implement such logic. Note: It is a basic, well-known requirement that OAuth servers should verify that the redirect URI is among the allowed list for the client, both during the authorization flow and subsequently when exchanging the authorization code for an access token. workers-oauth-provider implemented only the latter check, not the former. Unfortunately, the former is the much more important check. Readers who are familiar with OAuth may recognize that failing to check redirect URIs against the allowed list is a well-known, basic mistake, covered extensively in the RFC and elsewhere. The author of this library would like everyone to know that he was, in fact, well-aware of this requirement, thought about it a lot while designing the library, and then, somehow, forgot to actually make sure the check was in the code. That is, it's not that he didn't know what he was doing, it's that he knew what he was doing but flubbed it. | ||||
| CVE-2016-1000340 | 2 Bouncycastle, Redhat | 4 Bc-java, Jboss Fuse, Satellite and 1 more | 2025-05-12 | N/A |
| In the Bouncy Castle JCE Provider versions 1.51 to 1.55, a carry propagation bug was introduced in the implementation of squaring for several raw math classes have been fixed (org.bouncycastle.math.raw.Nat???). These classes are used by our custom elliptic curve implementations (org.bouncycastle.math.ec.custom.**), so there was the possibility of rare (in general usage) spurious calculations for elliptic curve scalar multiplications. Such errors would have been detected with high probability by the output validation for our scalar multipliers. | ||||
| CVE-2022-22231 | 1 Juniper | 9 Junos, Srx1500, Srx4100 and 6 more | 2025-05-12 | 7.5 High |
| An Unchecked Return Value to NULL Pointer Dereference vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). On SRX Series if Unified Threat Management (UTM) Enhanced Content Filtering (CF) and AntiVirus (AV) are enabled together and the system processes specific valid transit traffic the Packet Forwarding Engine (PFE) will crash and restart. This issue affects Juniper Networks Junos OS 21.4 versions prior to 21.4R1-S2, 21.4R2 on SRX Series. This issue does not affect Juniper Networks Junos OS versions prior to 21.4R1. | ||||
| CVE-2024-22454 | 1 Dell | 1 Powerprotect Data Manager | 2025-05-09 | 8.8 High |
| Dell PowerProtect Data Manager, version 19.15 and prior versions, contain a weak password recovery mechanism for forgotten passwords. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to unauthorized access to the application with privileges of the compromised account. The attacker could retrieve the reset password token without authorization and then perform the password change | ||||
| CVE-2024-20673 | 1 Microsoft | 7 Excel, Office, Powerpoint and 4 more | 2025-05-09 | 7.8 High |
| Microsoft Office Remote Code Execution Vulnerability | ||||
| CVE-2022-22233 | 1 Juniper | 2 Junos, Junos Os Evolved | 2025-05-09 | 5.5 Medium |
| An Unchecked Return Value to NULL Pointer Dereference vulnerability in Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). In Segment Routing (SR) to Label Distribution Protocol (LDP) interworking scenario, configured with Segment Routing Mapping Server (SRMS) at any node, when an Area Border Router (ABR) leaks the SRMS entries having "S" flag set from IS-IS Level 2 to Level 1, an rpd core might be observed when a specific low privileged CLI command is issued. This issue affects: Juniper Networks Junos OS 21.4 versions prior to 21.4R1-S2, 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved 21.4-EVO versions prior to 21.4R1-S2-EVO, 21.4R2-S1-EVO, 21.4R3-EVO; 22.1-EVO versions prior to 22.1R2-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 21.4R1. Juniper Networks Junos OS Evolved versions prior to 21.4R1-EVO. | ||||
| CVE-2024-24808 | 1 Pyload | 1 Pyload | 2025-05-09 | 4.7 Medium |
| pyLoad is an open-source Download Manager written in pure Python. There is an open redirect vulnerability due to incorrect validation of input values when redirecting users after login. pyLoad is validating URLs via the `get_redirect_url` function when redirecting users at login. This vulnerability has been patched with commit fe94451. | ||||
| CVE-2013-4253 | 1 Redhat | 1 Openshift | 2025-05-09 | 7.5 High |
| The deployment script in the unsupported "OpenShift Extras" set of add-on scripts, in Red Hat Openshift 1, installs a default public key in the root user's authorized_keys file. | ||||
| CVE-2022-33077 | 1 Nopcommerce | 1 Nopcommerce | 2025-05-09 | 7.5 High |
| An access control issue in nopcommerce v4.50.2 allows attackers to arbitrarily modify any customer's address via the addressedit endpoint. | ||||
| CVE-2024-0728 | 1 Foru Cms Project | 1 Foru Cms | 2025-05-09 | 4.7 Medium |
| A vulnerability classified as problematic was found in ForU CMS up to 2020-06-23. Affected by this vulnerability is an unknown functionality of the file channel.php. The manipulation of the argument c_cmodel leads to file inclusion. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-251551. | ||||
| CVE-2022-22249 | 1 Juniper | 18 Junos, Mx10, Mx10000 and 15 more | 2025-05-09 | 6.5 Medium |
| An Improper Control of a Resource Through its Lifetime vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series allows an unauthenticated adjacent attacker to cause a Denial of Service (DoS). When there is a continuous mac move a memory corruption causes one or more FPCs to crash and reboot. These MAC moves can be between two local interfaces or between core/EVPN and local interface. The below error logs can be seen in PFE syslog when this issue happens: xss_event_handler(1071): EA[0:0]_PPE 46.xss[0] ADDR Error. ppe_error_interrupt(4298): EA[0:0]_PPE 46 Errors sync xtxn error xss_event_handler(1071): EA[0:0]_PPE 1.xss[0] ADDR Error. ppe_error_interrupt(4298): EA[0:0]_PPE 1 Errors sync xtxn error xss_event_handler(1071): EA[0:0]_PPE 2.xss[0] ADDR Error. This issue affects Juniper Networks Junos OS on MX Series: All versions prior to 15.1R7-S13; 19.1 versions prior to 19.1R3-S9; 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S6; 19.4 versions prior to 19.4R2-S7, 19.4R3-S8; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2. | ||||
| CVE-2022-22250 | 1 Juniper | 2 Junos, Junos Os Evolved | 2025-05-09 | 6.5 Medium |
| An Improper Control of a Resource Through its Lifetime vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS and Junos OS Evolved allows unauthenticated adjacent attacker to cause a Denial of Service (DoS). In an EVPN-MPLS scenario, if MAC is learned locally on an access interface but later a request to delete is received indicating that the MAC was learnt remotely, this can lead to memory corruption which can result in line card crash and reload. This issue affects: Juniper Networks Junos OS All versions 17.3R1 and later versions prior to 19.2R3-S5; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S8; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S4; 20.3 versions prior to 20.3R3-S3; 20.4 versions prior to 20.4R3-S3; 21.1 versions prior to 21.1R3-S1; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2; 21.4 versions prior to 21.4R1-S1, 21.4R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S3-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO versions prior to 21.2R3-EVO; 21.3-EVO versions prior to 21.3R2-EVO; 21.4-EVO versions prior to 21.4R1-S1-EVO, 21.4R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 17.3R1. | ||||
| CVE-2022-43415 | 1 Jenkins | 1 Repo | 2025-05-09 | 7.5 High |
| Jenkins REPO Plugin 1.15.0 and earlier does not configure its XML parser to prevent XML external entity (XXE) attacks. | ||||
| CVE-2022-43424 | 1 Jenkins | 2 Compuware Xpediter Code Coverage, Jenkins | 2025-05-08 | 5.3 Medium |
| Jenkins Compuware Xpediter Code Coverage Plugin 1.0.7 and earlier implements an agent/controller message that does not limit where it can be executed, allowing attackers able to control agent processes to obtain the values of Java system properties from the Jenkins controller process. | ||||
| CVE-2022-43435 | 1 Jenkins | 1 360 Fireline | 2025-05-08 | 5.3 Medium |
| Jenkins 360 FireLine Plugin 1.7.2 and earlier programmatically disables Content-Security-Policy protection for user-generated content in workspaces, archived artifacts, etc. that Jenkins offers for download. | ||||