| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Illustrator is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Illustrator is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Illustrator is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| PyTorch torchvision through 0.28.0, fixed in commit 4e05dc2, contains an out-of-bounds heap read vulnerability in the GIF decoder's read_from_tensor callback that passes unclamped length to memcpy. Attackers can supply malicious or truncated GIF files to cause denial of service via segmentation fault or disclose adjacent heap memory contents. |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever. |
| The WPO365 | Login plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 43.2. This is due to the Ajax_Service::verify_ajax_request() helper gating its wp_verify_nonce() call behind the boolean option 'enable_nonce_check', which is absent from the default 'wpo365_options' array and therefore evaluates to false via get_global_boolean_var(); as a result, the wp_ajax_wpo365_update_settings handler (Ajax_Service::update_settings) accepts POSTs from cross-origin pages and forwards the attacker-supplied 'settings' payload (base64/JSON) to Options_Service::update_options(), which merges every key/value into wpo365_options without a key allowlist. This makes it possible for unauthenticated attackers to overwrite arbitrary plugin options — including enabling the SCIM REST endpoint (enable_scim), planting an attacker-known scim_secret_token, and setting new_usr_default_role to 'administrator' — via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| Pronetiqs IntraVUE Versions 3.2.1a14 and prior have a plaintext storage of a password vulnerability that could expose cleartext credentials through the API. |
| Pronetiqs IntraVUE versions 3.2.1a14 and prior have an exposure of sensitive system information to an unauthorized control sphere vulnerability which could expose the underlying host/share filesystem. |
| The Wpify Woo plugin for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 5.4.16. This is due to the SettingsApi::save_option() REST route (POST /wp-json/wpify-woo/v1/option) passing the request-supplied 'option' and 'data' parameters directly to update_option() without any option-name allowlist or value sanitization, while the permission_callback only verifies the manage_woocommerce capability. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to elevate their privileges to Administrator by overwriting arbitrary WordPress options (for example setting default_role to administrator and users_can_register to 1, or disabling security plugins via active_plugins). |
| Multiple security vulnerabilities in Snowflake libsnowflakeclient versions prior to 2.9.2 could allow remote code execution and credential exfiltration. A stack-based buffer overflow in the file download path could allow remote code execution on a victim host. An attacker could exploit this by uploading a file with a crafted encryption metadata field to a shared internal stage that a victim process later downloads, and impact would be limited to deployments where principals with different privilege levels share the same internal stage. A related out-of-bounds write in the same download path could allow memory corruption with attacker-controlled write primitives. An attacker may exploit this through a crafted initialization vector metadata field on a shared stage, and impact would be limited by the same stage-write precondition. Improper validation of connection parameters could allow an attacker-controlled input to redirect outbound authentication requests — including credentials and tokens — to an attacker-controlled endpoint. Impact is limited to embedding deployments where a lower-privileged principal can influence connection configuration while higher-privileged service credentials are in use. The fix is available in Snowflake libsnowflakeclient version 2.9.2. The Snowflake PHP PDO Driver and Snowflake ODBC Driver embed the affected library; fixes are available in versions 4.1.0 and 3.19.0 respectively. Users must manually upgrade. |
| The EventON Action User plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.5.14. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to grant EventON management capabilities and the upload_files capability to any non-administrator WordPress role or user, escalating their privileges within the site. The administrator role is protected by an early-return guard in update_role_caps(), so only non-administrator roles and individual users can be targeted; however, the same unauthenticated exposure also allows attackers to enumerate all WordPress users with their IDs and display names, disclose role and user capability state along with nonce values, and tamper with event-to-user term assignments. |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Replication). Supported versions that are affected are MySQL Server: 8.4.0-8.4.10, 9.7.0-9.7.1; MySQL Cluster: 8.0.0-8.0.47, 8.4.0-8.4.10 and 9.7.0-9.7.1. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in takeover of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H). |
| An out-of-bounds write flaw was found in the X.Org X server and Xwayland in DRIGetBuffers/DRIGetBuffersWithFormat. A client that requests multiple DRI2BufferBackLeft attachments and one DRI2BufferFrontLeft can trigger an out-of-bounds heap write. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| Netty is a network application framework for development of protocol servers and clients. In versions 4.2.0.Final through 4.2.15.Final and 4.1.0.Final through 4.1.135.Final, any caller that can deliver bytes to a Netty channel pipeline containing `XmlDecoder` can send XML with a `DOCTYPE` declaration to an `AsyncXMLInputFactory` instantiated with no security configuration, leaving DTD and entity handling active depending on Aalto XML async parser behavior and creating conditional XML external entity risk. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Netty is a network application framework for development of protocol servers and clients. In versions 4.2.0.Final through 4.2.15.Final and 4.1.0.Final through 4.1.135.Final, a remote unauthenticated peer can leak one direct `ByteBuf` per HTTP/2 `DATA` frame in applications that enable HTTP/2 content decompression via `DelegatingDecompressorFrameListener`. When a `DATA` frame is processed for a stream whose decompressor has already been closed, `Http2Decompressor.decompress(...)` calls `decompressor.writeInbound(data.retain())` and does not release the retained buffer on the error path, eventually exhausting direct memory and crashing the JVM. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Out of bounds write in Codecs in Google Chrome prior to 150.0.7871.186 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Blink in Google Chrome prior to 150.0.7871.186 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: avoid double free of pool->stack on AQ init failure
otx2_pool_aq_init() frees pool->stack when mailbox sync or retry
allocation fails, but leaves the pointer unchanged. Later,
otx2_sq_aura_pool_init() unwinds the partial setup through
otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific
cn20k_pool_aq_init() implementation has the same bug in
its corresponding error path.
Set pool->stack to NULL immediately after the local free so the shared
cleanup path does not free the same stack again while cleaning up
partially initialized pool state.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2/CN20K hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req
When fuse_resend() moves a request from fpq->processing back to
fiq->pending, it sets FR_PENDING and clears FR_SENT but does not
remove the requests intr_entry from fiq->interrupts. If the
request had FR_INTERRUPTED set from a prior signal, intr_entry
remains dangling on fiq->interrupts. When the requesting task
then receives a fatal signal, fuse_remove_pending_req() sees
FR_PENDING=1, removes the request from fiq->pending and frees it
via the refcount path, also without cleaning intr_entry. The
stale intr_entry causes use-after-free when fuse_read_interrupt()
iterates fiq->interrupts:
- list_del_init(&req->intr_entry) -> UAF write on freed slab
- req->in.h.unique -> UAF read, data leaked to userspace
Remove intr_entry from fiq->interrupts in fuse_resend() for
interrupted requests before they are placed back on fiq->pending.
Add a WARN_ON if the intr_entry is not empty on request destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - remove unused character device and IOCTLs
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused
adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal
module_init/module_exit hooks for workqueue, AER, and crypto/compression
algorithm registration.
Clean up leftover dead code that was only reachable from the removed
IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),
adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),
adf_get_vf_real_id() and the unused ADF_CFG macros.
Additionally, drop the entry associated to QAT IOCTLs in
ioctl-number.rst. |
