| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"
This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f.
This patch introduces a possible null-ptr-def problem. Revert it. And the
fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth:
btsdio: fix use after free bug in btsdio_remove due to race condition"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
Fix the below kernel panic due to null pointer access:
[ 18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048
[ 18.513464] Mem abort info:
[ 18.516346] ESR = 0x0000000096000005
[ 18.520204] EC = 0x25: DABT (current EL), IL = 32 bits
[ 18.525706] SET = 0, FnV = 0
[ 18.528878] EA = 0, S1PTW = 0
[ 18.532117] FSC = 0x05: level 1 translation fault
[ 18.537138] Data abort info:
[ 18.540110] ISV = 0, ISS = 0x00000005
[ 18.544060] CM = 0, WnR = 0
[ 18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000
[ 18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
**Snip**
[ 18.696758] Call trace:
[ 18.699278] adreno_gpu_cleanup+0x30/0x88
[ 18.703396] a6xx_destroy+0xc0/0x130
[ 18.707066] a6xx_gpu_init+0x308/0x424
[ 18.710921] adreno_bind+0x178/0x288
[ 18.714590] component_bind_all+0xe0/0x214
[ 18.718797] msm_drm_bind+0x1d4/0x614
[ 18.722566] try_to_bring_up_aggregate_device+0x16c/0x1b8
[ 18.728105] __component_add+0xa0/0x158
[ 18.732048] component_add+0x20/0x2c
[ 18.735719] adreno_probe+0x40/0xc0
[ 18.739300] platform_probe+0xb4/0xd4
[ 18.743068] really_probe+0xfc/0x284
[ 18.746738] __driver_probe_device+0xc0/0xec
[ 18.751129] driver_probe_device+0x48/0x110
[ 18.755421] __device_attach_driver+0xa8/0xd0
[ 18.759900] bus_for_each_drv+0x90/0xdc
[ 18.763843] __device_attach+0xfc/0x174
[ 18.767786] device_initial_probe+0x20/0x2c
[ 18.772090] bus_probe_device+0x40/0xa0
[ 18.776032] deferred_probe_work_func+0x94/0xd0
[ 18.780686] process_one_work+0x190/0x3d0
[ 18.784805] worker_thread+0x280/0x3d4
[ 18.788659] kthread+0x104/0x1c0
[ 18.791981] ret_from_fork+0x10/0x20
[ 18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516)
[ 18.801913] ---[ end trace 0000000000000000 ]---
[ 18.809039] Kernel panic - not syncing: Oops: Fatal exception
Patchwork: https://patchwork.freedesktop.org/patch/515605/ |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: always release netdev hooks from notifier
This reverts "netfilter: nf_tables: skip netdev events generated on netns removal".
The problem is that when a veth device is released, the veth release
callback will also queue the peer netns device for removal.
Its possible that the peer netns is also slated for removal. In this
case, the device memory is already released before the pre_exit hook of
the peer netns runs:
BUG: KASAN: slab-use-after-free in nf_hook_entry_head+0x1b8/0x1d0
Read of size 8 at addr ffff88812c0124f0 by task kworker/u8:1/45
Workqueue: netns cleanup_net
Call Trace:
nf_hook_entry_head+0x1b8/0x1d0
__nf_unregister_net_hook+0x76/0x510
nft_netdev_unregister_hooks+0xa0/0x220
__nft_release_hook+0x184/0x490
nf_tables_pre_exit_net+0x12f/0x1b0
..
Order is:
1. First netns is released, veth_dellink() queues peer netns device
for removal
2. peer netns is queued for removal
3. peer netns device is released, unreg event is triggered
4. unreg event is ignored because netns is going down
5. pre_exit hook calls nft_netdev_unregister_hooks but device memory
might be free'd already. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix wrong resources deallocation order
When trying to destroy QP or CQ, we first decrease the refcount and
potentially free memory regions allocated for the object and then
request the device to destroy the object. If the device fails, the
object isn't fully destroyed so the user/IB core can try to destroy the
object again which will lead to underflow when trying to decrease an
already zeroed refcount.
Deallocate resources in reverse order of allocating them to safely free
them. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
Userspace can guess the id value and try to race oa_config object creation
with config remove, resulting in a use-after-free if we dereference the
object after unlocking the metrics_lock. For that reason, unlocking the
metrics_lock must be done after we are done dereferencing the object.
[tursulin: Manually added stable tag.]
(cherry picked from commit 49f6f6483b652108bcb73accd0204a464b922395) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr
When smb1 mount fails, KASAN detect slab-out-of-bounds in
init_smb2_rsp_hdr like the following one.
For smb1 negotiate(56bytes) , init_smb2_rsp_hdr() for smb2 is called.
The issue occurs while handling smb1 negotiate as smb2 server operations.
Add smb server operations for smb1 (get_cmd_val, init_rsp_hdr,
allocate_rsp_buf, check_user_session) to handle smb1 negotiate so that
smb2 server operation does not handle it.
[ 411.400423] CIFS: VFS: Use of the less secure dialect vers=1.0 is
not recommended unless required for access to very old servers
[ 411.400452] CIFS: Attempting to mount \\192.168.45.139\homes
[ 411.479312] ksmbd: init_smb2_rsp_hdr : 492
[ 411.479323] ==================================================================
[ 411.479327] BUG: KASAN: slab-out-of-bounds in
init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479369] Read of size 16 at addr ffff888488ed0734 by task kworker/14:1/199
[ 411.479379] CPU: 14 PID: 199 Comm: kworker/14:1 Tainted: G
OE 6.1.21 #3
[ 411.479386] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8
Series/Z10PA-D8 Series, BIOS 3801 08/23/2019
[ 411.479390] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 411.479425] Call Trace:
[ 411.479428] <TASK>
[ 411.479432] dump_stack_lvl+0x49/0x63
[ 411.479444] print_report+0x171/0x4a8
[ 411.479452] ? kasan_complete_mode_report_info+0x3c/0x200
[ 411.479463] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479497] kasan_report+0xb4/0x130
[ 411.479503] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479537] kasan_check_range+0x149/0x1e0
[ 411.479543] memcpy+0x24/0x70
[ 411.479550] init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479585] handle_ksmbd_work+0x109/0x760 [ksmbd]
[ 411.479616] ? _raw_spin_unlock_irqrestore+0x50/0x50
[ 411.479624] ? smb3_encrypt_resp+0x340/0x340 [ksmbd]
[ 411.479656] process_one_work+0x49c/0x790
[ 411.479667] worker_thread+0x2b1/0x6e0
[ 411.479674] ? process_one_work+0x790/0x790
[ 411.479680] kthread+0x177/0x1b0
[ 411.479686] ? kthread_complete_and_exit+0x30/0x30
[ 411.479692] ret_from_fork+0x22/0x30
[ 411.479702] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sunplus: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
1. the memory allocated in mmc_alloc_host() will be leaked
2. null-ptr-deref will happen when calling mmc_remove_host()
in remove function spmmc_drv_remove() because deleting not
added device.
Fix this by checking the return value of mmc_add_host(). Moreover,
I fixed the error handling path of spmmc_drv_probe() to clean up. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: flower: fix filter idr initialization
The cited commit moved idr initialization too early in fl_change() which
allows concurrent users to access the filter that is still being
initialized and is in inconsistent state, which, in turn, can cause NULL
pointer dereference [0]. Since there is no obvious way to fix the ordering
without reverting the whole cited commit, alternative approach taken to
first insert NULL pointer into idr in order to allocate the handle but
still cause fl_get() to return NULL and prevent concurrent users from
seeing the filter while providing miss-to-action infrastructure with valid
handle id early in fl_change().
[ 152.434728] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN
[ 152.436163] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 152.437269] CPU: 4 PID: 3877 Comm: tc Not tainted 6.3.0-rc4+ #5
[ 152.438110] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 152.439644] RIP: 0010:fl_dump_key+0x8b/0x1d10 [cls_flower]
[ 152.440461] Code: 01 f2 02 f2 c7 40 08 04 f2 04 f2 c7 40 0c 04 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 84 24 00 01 00 00 48 89 c8 48 c1 e8 03 <0f> b6 04 10 84 c0 74 08 3c 03 0f 8e 98 19 00 00 8b 13 85 d2 74 57
[ 152.442885] RSP: 0018:ffff88817a28f158 EFLAGS: 00010246
[ 152.443851] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 152.444826] RDX: dffffc0000000000 RSI: ffffffff8500ae80 RDI: ffff88810a987900
[ 152.445791] RBP: ffff888179d88240 R08: ffff888179d8845c R09: ffff888179d88240
[ 152.446780] R10: ffffed102f451e48 R11: 00000000fffffff2 R12: ffff88810a987900
[ 152.447741] R13: ffffffff8500ae80 R14: ffff88810a987900 R15: ffff888149b3c738
[ 152.448756] FS: 00007f5eb2a34800(0000) GS:ffff88881ec00000(0000) knlGS:0000000000000000
[ 152.449888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 152.450685] CR2: 000000000046ad19 CR3: 000000010b0bd006 CR4: 0000000000370ea0
[ 152.451641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 152.452628] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 152.453588] Call Trace:
[ 152.454032] <TASK>
[ 152.454447] ? netlink_sendmsg+0x7a1/0xcb0
[ 152.455109] ? sock_sendmsg+0xc5/0x190
[ 152.455689] ? ____sys_sendmsg+0x535/0x6b0
[ 152.456320] ? ___sys_sendmsg+0xeb/0x170
[ 152.456916] ? do_syscall_64+0x3d/0x90
[ 152.457529] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.458321] ? ___sys_sendmsg+0xeb/0x170
[ 152.458958] ? __sys_sendmsg+0xb5/0x140
[ 152.459564] ? do_syscall_64+0x3d/0x90
[ 152.460122] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.460852] ? fl_dump_key_options.part.0+0xea0/0xea0 [cls_flower]
[ 152.461710] ? _raw_spin_lock+0x7a/0xd0
[ 152.462299] ? _raw_read_lock_irq+0x30/0x30
[ 152.462924] ? nla_put+0x15e/0x1c0
[ 152.463480] fl_dump+0x228/0x650 [cls_flower]
[ 152.464112] ? fl_tmplt_dump+0x210/0x210 [cls_flower]
[ 152.464854] ? __kmem_cache_alloc_node+0x1a7/0x330
[ 152.465592] ? nla_put+0x15e/0x1c0
[ 152.466160] tcf_fill_node+0x515/0x9a0
[ 152.466766] ? tc_setup_offload_action+0xf0/0xf0
[ 152.467463] ? __alloc_skb+0x13c/0x2a0
[ 152.468067] ? __build_skb_around+0x330/0x330
[ 152.468814] ? fl_get+0x107/0x1a0 [cls_flower]
[ 152.469503] tc_del_tfilter+0x718/0x1330
[ 152.470115] ? is_bpf_text_address+0xa/0x20
[ 152.470765] ? tc_ctl_chain+0xee0/0xee0
[ 152.471335] ? __kernel_text_address+0xe/0x30
[ 152.471948] ? unwind_get_return_address+0x56/0xa0
[ 152.472639] ? __thaw_task+0x150/0x150
[ 152.473218] ? arch_stack_walk+0x98/0xf0
[ 152.473839] ? __stack_depot_save+0x35/0x4c0
[ 152.474501] ? stack_trace_save+0x91/0xc0
[ 152.475119] ? security_capable+0x51/0x90
[ 152.475741] rtnetlink_rcv_msg+0x2c1/0x9d0
[ 152.476387] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 152.477042]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: ov5675: Fix memleak in ov5675_init_controls()
There is a kmemleak when testing the media/i2c/ov5675.c with bpf mock
device:
AssertionError: unreferenced object 0xffff888107362160 (size 16):
comm "python3", pid 277, jiffies 4294832798 (age 20.722s)
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000abe7d67c>] __kmalloc_node+0x44/0x1b0
[<000000008a725aac>] kvmalloc_node+0x34/0x180
[<000000009a53cd11>] v4l2_ctrl_handler_init_class+0x11d/0x180
[videodev]
[<0000000055b46db0>] ov5675_probe+0x38b/0x897 [ov5675]
[<00000000153d886c>] i2c_device_probe+0x28d/0x680
[<000000004afb7e8f>] really_probe+0x17c/0x3f0
[<00000000ff2f18e4>] __driver_probe_device+0xe3/0x170
[<000000000a001029>] driver_probe_device+0x49/0x120
[<00000000e39743c7>] __device_attach_driver+0xf7/0x150
[<00000000d32fd070>] bus_for_each_drv+0x114/0x180
[<000000009083ac41>] __device_attach+0x1e5/0x2d0
[<0000000015b4a830>] bus_probe_device+0x126/0x140
[<000000007813deaf>] device_add+0x810/0x1130
[<000000007becb867>] i2c_new_client_device+0x386/0x540
[<000000007f9cf4b4>] of_i2c_register_device+0xf1/0x110
[<00000000ebfdd032>] of_i2c_notify+0xfc/0x1f0
ov5675_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix blktrace debugfs entries leakage
Commit 99d055b4fd4b ("block: remove per-disk debugfs files in
blk_unregister_queue") moves blk_trace_shutdown() from
blk_release_queue() to blk_unregister_queue(), this is safe if blktrace
is created through sysfs, however, there is a regression in corner
case.
blktrace can still be enabled after del_gendisk() through ioctl if
the disk is opened before del_gendisk(), and if blktrace is not shutdown
through ioctl before closing the disk, debugfs entries will be leaked.
Fix this problem by shutdown blktrace in disk_release(), this is safe
because blk_trace_remove() is reentrant. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
hci_remove_adv_monitor() ->
msft_remove_monitor() ->
msft_remove_monitor_sync() ->
msft_le_cancel_monitor_advertisement_cb() ->
hci_free_adv_monitor()
Let's fix the problem by just stashing the relevant data when it's
still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix warning in trace_buffered_event_disable()
Warning happened in trace_buffered_event_disable() at
WARN_ON_ONCE(!trace_buffered_event_ref)
Call Trace:
? __warn+0xa5/0x1b0
? trace_buffered_event_disable+0x189/0x1b0
__ftrace_event_enable_disable+0x19e/0x3e0
free_probe_data+0x3b/0xa0
unregister_ftrace_function_probe_func+0x6b8/0x800
event_enable_func+0x2f0/0x3d0
ftrace_process_regex.isra.0+0x12d/0x1b0
ftrace_filter_write+0xe6/0x140
vfs_write+0x1c9/0x6f0
[...]
The cause of the warning is in __ftrace_event_enable_disable(),
trace_buffered_event_enable() was called once while
trace_buffered_event_disable() was called twice.
Reproduction script show as below, for analysis, see the comments:
```
#!/bin/bash
cd /sys/kernel/tracing/
# 1. Register a 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was set;
# 2) trace_buffered_event_enable() was called first time;
echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
# 2. Enable the event registered, then:
# 1) SOFT_DISABLED_BIT was cleared;
# 2) trace_buffered_event_disable() was called first time;
echo 1 > events/initcall/initcall_finish/enable
# 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was
# set again!!!
cat /proc/cmdline
# 4. Unregister the 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was cleared again;
# 2) trace_buffered_event_disable() was called second time!!!
echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
```
To fix it, IIUC, we can change to call trace_buffered_event_enable() at
fist time soft-mode enabled, and call trace_buffered_event_disable() at
last time soft-mode disabled. |
| theshit is a command-line utility that automatically detects and fixes common mistakes in shell commands. Prior to version 0.1.1, the application loads custom Python rules and configuration files from user-writable locations (e.g., `~/.config/theshit/`) without validating ownership or permissions when executed with elevated privileges. If the tool is invoked with `sudo` or otherwise runs with an effective UID of root, it continues to trust configuration files originating from the unprivileged user's environment. This allows a local attacker to inject arbitrary Python code via a malicious rule or configuration file, which is then executed with root privileges. Any system where this tool is executed with elevated privileges is affected. In environments where the tool is permitted to run via `sudo` without a password (`NOPASSWD`), a local unprivileged user can escalate privileges to root without additional interaction. The issue has been fixed in version 0.1.1. The patch introduces strict ownership and permission checks for all configuration files and custom rules. The application now enforces that rules are only loaded if they are owned by the effective user executing the tool. When executed with elevated privileges (`EUID=0`), the application refuses to load any files that are not owned by root or that are writable by non-root users. When executed as a non-root user, it similarly refuses to load rules owned by other users. This prevents both vertical and horizontal privilege escalation via execution of untrusted code. If upgrading is not possible, users should avoid executing the application with `sudo` or as the root user. As a temporary mitigation, ensure that directories containing custom rules and configuration files are owned by root and are not writable by non-root users. Administrators may also audit existing custom rules before running the tool with elevated privileges. |
| A vulnerability was detected in beecue FastBee up to 2.1. Impacted is the function getRootElement of the file springboot/fastbee-server/sip-server/src/main/java/com/fastbee/sip/handler/req/ReqAbstractHandler.java of the component SIP Message Handler. The manipulation results in xml external entity reference. It is possible to launch the attack remotely. A high complexity level is associated with this attack. The exploitability is considered difficult. The project owner replied to the issue report: "Okay, we'll handle it as soon as possible." |
| A security vulnerability has been detected in 08CMS Novel System up to 3.4. This issue affects some unknown processing of the file admina/mtpls.inc.php of the component Template Handler. The manipulation leads to code injection. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. |
| A weakness has been identified in zhujunliang3 work_platform up to 6bc5a50bb527ce27f7906d11ea6ec139beb79c31. This vulnerability affects unknown code of the component Content Handler. Executing manipulation can lead to cross site scripting. The attack may be performed from remote. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
| A security flaw has been discovered in sunhailin12315 product-review 商品评价系统 up to 91ead6890b4065bb45b7602d0d73348e75cb4639. This affects an unknown part of the component Write a Review. Performing manipulation of the argument content results in cross site scripting. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited. This product adopts a rolling release strategy to maintain continuous delivery The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_hwlro_get_fdir_all()
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix potential user-after-free
This fixes all instances of which requires to allocate a buffer calling
alloc_skb which may release the chan lock and reacquire later which
makes it possible that the chan is disconnected in the meantime. |
