| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: check for PCI upstream bridge existence
pci_upstream_bridge() returns NULL if the device is on a root bus. If
8821CE is installed in the system with such a PCI topology, the probing
routine will crash. This has probably been unnoticed as 8821CE is mostly
supplied in laptops where there is a PCI-to-PCI bridge located upstream
from the device. However the card might be installed on a system with
different configuration.
Check if the bridge does exist for the specific workaround to be applied.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm2_read_public() calls tpm_buf_init() but fails to call
tpm_buf_destroy() on two exit paths, leaking a page allocation:
1. When name_size() returns an error (unrecognized hash algorithm),
the function returns directly without destroying the buffer.
2. On the success path, the buffer is never destroyed before
returning.
All other error paths in the function correctly call
tpm_buf_destroy() before returning.
Fix both by adding the missing tpm_buf_destroy() calls. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs
directory") removed the manual debugfs teardown, relying on the I2C core
to handle it. However, this creates a window where debugfs files are
still accessible after edt_ft5x06_ts_teardown_debugfs() frees
tsdata->raw_buffer.
To prevent a use-after-free, protect the freeing of raw_buffer with the
device mutex and set raw_buffer to NULL. The debugfs read function
already checks if raw_buffer is NULL under the same mutex, so this
safely avoids the use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: reject zero shift in nft_bitwise
Reject zero shift operands for nft_bitwise left and right shift
expressions during initialization.
The carry propagation logic computes the carry from the adjacent 32-bit
word using BITS_PER_TYPE(u32) - shift. A zero shift operand turns this
into a 32-bit shift, which is undefined behaviour.
Reject zero shift operands in the control plane, alongside the existing
check for values greater than or equal to 32, so malformed rules never
reach the packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
| IBM WebSphere Application Server - Liberty 22.0.0.11 through 26.0.0.5 IBM WebSphere Application Server Liberty could allow a remote attacker to bypass security under limited conditions by exploiting a specific timing window. |
| Hitachi Vantara Pentaho Data Integration & Analytics versions before 10.2.0.6 and 11.0.0.0, including 9.3.x and 8.3.x, does not apply ACLs on certain API endpoints related to platform mail notfications. |
| Attackers carefully craft malicious scripts, such as JavaScript, and inject them into target systems; when other users access pages containing such malicious content, the scripts are automatically loaded and executed in the victim's browser.Attackers can thereby steal user cookies, hijack session privileges, and tamper with page content.Since the malicious code is stored within the system, the attack scope is broad and the concealment is strong, making it frequently employed for data theft attacks. |
| A security flaw has been discovered in SourceCodester CET Automated Grading System with AI Predictive Analytics 1.0. This affects an unknown function. Performing a manipulation results in cross-site request forgery. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.2.1, render_toc_ul() builds a <ul> table-of-contents tree from a list of (level, id, text) tuples. Both the id value (used as href="#<id>") and the text value (used as the visible link label) are inserted into <a> tags via a plain Python format string — with no HTML escaping applied to either value. When heading IDs are derived from user-supplied heading text (the standard use-case for readable slug anchors), an attacker can craft a heading whose text breaks out of the href="#..." attribute context, injecting arbitrary HTML tags including <script> blocks directly into the rendered TOC. This vulnerability is fixed in 3.2.1. |
| Missing Authorization vulnerability in Mamunur Rashid The Post Grid allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects The Post Grid: from n/a through 7.9.2. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: auth_gss: fix memory leaks in XDR decoding error paths
The gssx_dec_ctx(), gssx_dec_status(), and gssx_dec_name()
functions allocate memory via gssx_dec_buffer(), which calls
kmemdup(). When a subsequent decode operation fails, these
functions return immediately without freeing previously
allocated buffers, causing memory leaks.
The leak in gssx_dec_ctx() is particularly relevant because
the caller (gssp_accept_sec_context_upcall) initializes several
buffer length fields to non-zero values, resulting in memory
allocation:
struct gssx_ctx rctxh = {
.exported_context_token.len = GSSX_max_output_handle_sz,
.mech.len = GSS_OID_MAX_LEN,
.src_name.display_name.len = GSSX_max_princ_sz,
.targ_name.display_name.len = GSSX_max_princ_sz
};
If, for example, gssx_dec_name() succeeds for src_name but
fails for targ_name, the memory allocated for
exported_context_token, mech, and src_name.display_name
remains unreferenced and cannot be reclaimed.
Add error handling with goto-based cleanup to free any
previously allocated buffers before returning an error. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
pqi_report_phys_luns() fails to release the rpl_list buffer when
encountering an unsupported data format or when the allocation for
rpl_16byte_wwid_list fails. These early returns bypass the cleanup logic,
leading to memory leaks.
Consolidate the error handling by adding an out_free_rpl_list label and use
goto statements to ensure rpl_list is consistently freed on failure.
Compile tested only. Issue found using a prototype static analysis tool and
code review. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: arizona: Fix regulator resource leak on wm5102_clear_write_sequencer() failure
The wm5102_clear_write_sequencer() helper may return an error
and just return, bypassing the cleanup sequence and causing
regulators to remain enabled, leading to a resource leak.
Change the direct return to jump to the err_reset label to
properly free the resources. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients
During a warm reset flow, the cl->device pointer may be NULL if the
reset occurs while clients are still being enumerated. Accessing
cl->device->reference_count without a NULL check leads to a kernel panic.
This issue was identified during multi-unit warm reboot stress clycles.
Add a defensive NULL check for cl->device to ensure stability under
such intensive testing conditions.
KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]
Workqueue: ish_fw_update_wq fw_reset_work_fn
Call Trace:
ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp]
ishtp_reset_handler+0x85/0x1a0 [intel_ishtp]
fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc] |
| In the Linux kernel, the following vulnerability has been resolved:
soc: mediatek: svs: Fix memory leak in svs_enable_debug_write()
In svs_enable_debug_write(), the buf allocated by memdup_user_nul()
is leaked if kstrtoint() fails.
Fix this by using __free(kfree) to automatically free buf, eliminating
the need for explicit kfree() calls and preventing leaks.
[Angelo: Added missing cleanup.h inclusion] |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: Drop __initconst from gates
Since commit 8ceff24a754a ("clk: mediatek: clk-gate: Refactor
mtk_clk_register_gate to use mtk_gate struct") the mtk_gate structs
are no longer just used for initialization/registration, but also at
runtime. So drop __initconst annotations. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: fix role switching during resume
If the role change while we are suspended, the cdns3 driver switches to the
new mode during resume. However, switching to host mode in this context
causes a NULL pointer dereference.
The host role's start() operation registers a xhci-hcd device, but its
probe is deferred while we are in the resume path. The host role's resume()
operation assumes the xhci-hcd device is already probed, which is not the
case, leading to the dereference. Since the start() operation of the new
role is already called, the resume operation can be skipped.
So skip the resume operation for the new role if a role switch occurs
during resume. Once the resume sequence is complete, the xhci-hcd device
can be probed in case of host mode.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208
Mem abort info:
...
Data abort info:
...
[0000000000000208] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted
6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT
Hardware name: Texas Instruments J7200 EVM (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usb_hcd_is_primary_hcd+0x0/0x1c
lr : cdns_host_resume+0x24/0x5c
...
Call trace:
usb_hcd_is_primary_hcd+0x0/0x1c (P)
cdns_resume+0x6c/0xbc
cdns3_controller_resume.isra.0+0xe8/0x17c
cdns3_plat_resume+0x18/0x24
platform_pm_resume+0x2c/0x68
dpm_run_callback+0x90/0x248
device_resume+0x100/0x24c
dpm_resume+0x190/0x2ec
dpm_resume_end+0x18/0x34
suspend_devices_and_enter+0x2b0/0xa44
pm_suspend+0x16c/0x5fc
state_store+0x80/0xec
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x130/0x1dc
vfs_write+0x240/0x370
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0x108
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401)
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix dirtyclusters double decrement on fs shutdown
fstests test generic/388 occasionally reproduces a warning in
ext4_put_super() associated with the dirty clusters count:
WARNING: CPU: 7 PID: 76064 at fs/ext4/super.c:1324 ext4_put_super+0x48c/0x590 [ext4]
Tracing the failure shows that the warning fires due to an
s_dirtyclusters_counter value of -1. IOW, this appears to be a
spurious decrement as opposed to some sort of leak. Further tracing
of the dirty cluster count deltas and an LLM scan of the resulting
output identified the cause as a double decrement in the error path
between ext4_mb_mark_diskspace_used() and the caller
ext4_mb_new_blocks().
First, note that generic/388 is a shutdown vs. fsstress test and so
produces a random set of operations and shutdown injections. In the
problematic case, the shutdown triggers an error return from the
ext4_handle_dirty_metadata() call(s) made from
ext4_mb_mark_context(). The changed value is non-zero at this point,
so ext4_mb_mark_diskspace_used() does not exit after the error
bubbles up from ext4_mb_mark_context(). Instead, the former
decrements both cluster counters and returns the error up to
ext4_mb_new_blocks(). The latter falls into the !ar->len out path
which decrements the dirty clusters counter a second time, creating
the inconsistency.
To avoid this problem and simplify ownership of the cluster
reservation in this codepath, lift the counter reduction to a single
place in the caller. This makes it more clear that
ext4_mb_new_blocks() is responsible for acquiring cluster
reservation (via ext4_claim_free_clusters()) in the !delalloc case
as well as releasing it, regardless of whether it ends up consumed
or returned due to failure. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix memory leak in GET_DATA_DIRECT_SYSFS_PATH handler
The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function
allocates memory for the device path using kobject_get_path(). If the
length of the device path exceeds the output buffer length, the function
returns -ENOSPC but does not free the allocated memory, resulting in a
memory leak.
Add a kfree() call to the error path to ensure the allocated memory is
properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
