| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Webserver crash caused by scanning on TCP port 80 in Softing Industrial Automation GmbH gateways and switch.This issue affects
smartLink HW-PN: from 1.02 through 1.03
smartLink HW-DP: 1.31 |
| Certain WithSecure products allow a Denial of Service because the engine scanner can go into an infinite loop when processing an archive file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, WithSecure Linux Security 64 12.0, WithSecure Linux Protection 12.0, and WithSecure Atlant 1.0.35-1. |
| Fedify is a TypeScript library for building federated server apps powered by ActivityPub and other standards. This vulnerability allows a user to maneuver the Webfinger mechanism to perform a GET request to any internal resource on any Host, Port, URL combination regardless of present security mechanisms, and forcing the victim’s server into an infinite loop causing Denial of Service. Moreover, this issue can also be maneuvered into performing a Blind SSRF attack. This vulnerability is fixed in 1.0.14, 1.1.11, 1.2.11, and 1.3.4. |
| A vulnerability in the function that performs IPv4 and IPv6 Network Address Translation (NAT) DNS inspection for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an infinite loop condition that occurs when a Cisco Secure ASA or Cisco Secure FTD device processes DNS packets with DNS inspection enabled and the device is configured for NAT44, NAT64, or NAT46. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static NAT rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to create an infinite loop and cause the device to reload, resulting in a DoS condition. |
| Rustls is a modern TLS library written in Rust. `rustls::ConnectionCommon::complete_io` could fall into an infinite loop based on network input. When using a blocking rustls server, if a client send a `close_notify` message immediately after `client_hello`, the server's `complete_io` will get in an infinite loop. This vulnerability is fixed in 0.23.5, 0.22.4, and 0.21.11. |
| An improper input neutralization vulnerability in the management web interface of the Palo Alto Networks PAN-OS® software enables a malicious authenticated read-write administrator to impersonate another legitimate authenticated PAN-OS administrator.
The attacker must have network access to the management web interface to exploit this issue. You greatly reduce the risk of this issue by restricting access to the management web interface to only trusted internal IP addresses according to our recommended critical deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . |
| The Matrix specification before 1.16 (i.e., with a room version before 12) lacks create event uniqueness. |
| In WinZip through 29.0, there is a Mark-of-the-Web Bypass Vulnerability because of an incomplete fix for CVE-2024-8811. This vulnerability allows attackers to bypass the Mark-of-the-Web protection mechanism on affected installations of WinZip. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of archived files. When extracting files from a crafted archive that bears the Mark-of-the-Web, WinZip does not propagate the Mark-of-the-Web to the extracted files. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current user. NOTE: a third party has reported that this is a false positive, and has observed that the original CVE-2025-33028.md file has been deleted on GitHub. Also, this is disputed because Mark-of-the-Web propagation can increase risk via security-warning habituation, and because the intended control sphere for file-origin metadata (e.g., HostUrl in Zone.Identifier) may be narrower than that for reading the file's content. |
| In IZArc through 4.5, there is a Mark-of-the-Web Bypass Vulnerability. When a user performs an extraction from an archive file that bears Mark-of-the-Web, Mark-of-the-Web is not propagated to the extracted files. NOTE: this is disputed because Mark-of-the-Web propagation can increase risk via security-warning habituation, and because the intended control sphere for file-origin metadata (e.g., HostUrl in Zone.Identifier) may be narrower than that for reading the file's content. |
| Minder is an open source software supply chain security platform. In Minder Helm version 0.20241106.3386+ref.2507dbf and Minder Go versions from 0.0.72 to 0.0.83, Minder users may fetch content in the context of the Minder server, which may include URLs which the user would not normally have access to. This issue has been patched in Minder Helm version 0.20250203.3849+ref.fdc94f0 and Minder Go version 0.0.84. |
| Stored cross-site scripting (XSS) vulnerability in the LMT Dashboard of the Perx Customer Engagement & Loyalty Platform allows an authenticated attacker to execute arbitrary JavaScript code in a victim's browser. The vulnerability is due to improper sanitization of SVG file uploads. An attacker can upload a malicious SVG file containing a script payload to a campaign. When another user views this image on the public LMT microsite, the script executes, which can lead to session hijacking, data theft, or other unauthorized actions.This issue affects Customer Engagement & Loyalty Platform before 4.617.4. |
| The package `github.com/gomarkdown/markdown` is a Go library for parsing Markdown text and rendering as HTML. Prior to pseudoversion `v0.0.0-20240729232818-a2a9c4f`, which corresponds with commit `a2a9c4f76ef5a5c32108e36f7c47f8d310322252`, there was a logical problem in the paragraph function of the parser/block.go file, which allowed a remote attacker to cause a denial of service (DoS) condition by providing a tailor-made input that caused an infinite loop, causing the program to hang and consume resources indefinitely. Submit `a2a9c4f76ef5a5c32108e36f7c47f8d310322252` contains fixes to this problem. |
| Improper Neutralization of Script in Attributes in a Web Page vulnerability in Forcepoint Email Security (Blocked Messages module) allows Stored XSS.
This issue affects Email Security through 8.5.5. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| OpenDJ is an LDAPv3 compliant directory service. OpenDJ prior to 4.9.3 contains a denial-of-service (DoS) vulnerability that causes the server to become unresponsive to all LDAP requests without crashing or restarting. This issue occurs when an alias loop exists in the LDAP database. If an ldapsearch request is executed with alias dereferencing set to "always" on this alias entry, the server stops responding to all future requests. Fortunately, the server can be restarted without data corruption. This vulnerability is fixed in 4.9.3. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix readahead reclaim deadlock
Commit e26ee4efbc79 ("fuse: allocate ff->release_args only if release is
needed") skips allocating ff->release_args if the server does not
implement open. However in doing so, fuse_prepare_release() now skips
grabbing the reference on the inode, which makes it possible for an
inode to be evicted from the dcache while there are inflight readahead
requests. This causes a deadlock if the server triggers reclaim while
servicing the readahead request and reclaim attempts to evict the inode
of the file being read ahead. Since the folio is locked during
readahead, when reclaim evicts the fuse inode and fuse_evict_inode()
attempts to remove all folios associated with the inode from the page
cache (truncate_inode_pages_range()), reclaim will block forever waiting
for the lock since readahead cannot relinquish the lock because it is
itself blocked in reclaim:
>>> stack_trace(1504735)
folio_wait_bit_common (mm/filemap.c:1308:4)
folio_lock (./include/linux/pagemap.h:1052:3)
truncate_inode_pages_range (mm/truncate.c:336:10)
fuse_evict_inode (fs/fuse/inode.c:161:2)
evict (fs/inode.c:704:3)
dentry_unlink_inode (fs/dcache.c:412:3)
__dentry_kill (fs/dcache.c:615:3)
shrink_kill (fs/dcache.c:1060:12)
shrink_dentry_list (fs/dcache.c:1087:3)
prune_dcache_sb (fs/dcache.c:1168:2)
super_cache_scan (fs/super.c:221:10)
do_shrink_slab (mm/shrinker.c:435:9)
shrink_slab (mm/shrinker.c:626:10)
shrink_node (mm/vmscan.c:5951:2)
shrink_zones (mm/vmscan.c:6195:3)
do_try_to_free_pages (mm/vmscan.c:6257:3)
do_swap_page (mm/memory.c:4136:11)
handle_pte_fault (mm/memory.c:5562:10)
handle_mm_fault (mm/memory.c:5870:9)
do_user_addr_fault (arch/x86/mm/fault.c:1338:10)
handle_page_fault (arch/x86/mm/fault.c:1481:3)
exc_page_fault (arch/x86/mm/fault.c:1539:2)
asm_exc_page_fault+0x22/0x27
Fix this deadlock by allocating ff->release_args and grabbing the
reference on the inode when preparing the file for release even if the
server does not implement open. The inode reference will be dropped when
the last reference on the fuse file is dropped (see fuse_file_put() ->
fuse_release_end()). |
| An issue was discovered in the demo/LINUXTCP implementation of cwalter-at freemodbus v.2018-09-12 allowing attackers to reach an infinite loop via a crafted length value for a packet. |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured.
The issue occurs in the following cases:
* Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n";
* Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" |
| A vulnerability in the packet inspection functionality of the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to incorrect processing of traffic that is inspected by an affected device. An attacker could exploit this vulnerability by sending crafted traffic through the affected device. A successful exploit could allow the attacker to cause the affected device to enter an infinite loop while inspecting traffic, resulting in a DoS condition. The system watchdog will restart the Snort process automatically. |
| A vulnerability in the IKEv2 feature of Cisco IOS Software, IOS XE Software, Secure Firewall ASA Software, and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a DoS condition.
This vulnerability is due to the improper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause an infinite loop that exhausts resources and could cause the device to reload. |
