| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks
bpf_lsm_task_to_inode() is called under rcu_read_lock() and
bpf_lsm_inet_conn_established() is called from softirq context, so
neither hook can be used by sleepable LSM programs. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: close TOCTOU race while computing rcv_wnd
The MPTCP output path access locklessly the MPTCP-level ack_seq
in multiple times, using possibly different values for the data_ack
in the DSS option and to compute the announced rcv wnd for the same
packet.
Refactor the cote to avoid inconsistencies which may confuse the
peer. Also ensure that the MPTCP level rcv wnd is updated only when
the egress packet actually contains a DSS ack. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap
When parsing the radiotap header of an injected frame,
ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA value
directly as a shift count:
info->control.antennas |= BIT(*iterator.this_arg);
*iterator.this_arg is an 8-bit value taken straight from the frame
supplied by userspace, so BIT() can be asked to shift by up to 255. That
is undefined behaviour on the unsigned long and is reported by UBSAN:
UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30
shift exponent 235 is too large for 64-bit type 'unsigned long'
Call Trace:
ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174
ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451
...
packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109
info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antenna
indices 0 and 1 can ever be represented. Ignore any larger value instead
of shifting out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: usb: fix race between urb completion and rx_retry cancellation
It's possible that sequencing between setting ->stopped and cancelling
the rx_retry work (in ndo_stop) could leave us with an urb queued:
T1: ndo_stop T2: rx_retry_work
------------ ----------------
LD: ->stopped => false
ST: ->stopped <= true
usb_kill_urb()
mctp_usb_rx_queue()
usb_submit_urb()
cancel_delayed_work_sync()
That urb completion can then re-schedule rx_retry_work.
Strenghen the sequencing between the stop (preventing another requeue)
and the cancel by updating both atomically under a new rx lock. After
setting ->rx_stopped, and cancelling pending work, we know that the
requeue cannot occur, so all that's left is killing any pending urb. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: tlb: Flush walk cache when unsharing PMD tables
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gem: fix race between change_handle and handle_delete
drm_gem_change_handle_ioctl leaves the old handle live in the IDR
during the window between spin_unlock(table_lock) and the final
spin_lock(table_lock). A concurrent drm_gem_handle_delete on the old
handle succeeds in this window, decrements handle_count to 0, and frees
the GEM object while the new handle's IDR entry still references it.
NULL the old handle's IDR entry before dropping table_lock so that any
concurrent GEM_CLOSE on the old handle sees NULL and returns -EINVAL.
Restore the old entry on the prime-bookkeeping error path. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS
frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in
the generic FC transport. This is not a local userspace or IP network
path; the attacker must be able to inject fabric traffic, for example as
a compromised switch or fabric controller, or as a same-zone N_Port on a
fabric that permits source spoofing.
The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop
counter against the 32-bit on-wire pname_count field, and did not bound
pname_count by the descriptor body already validated by the TLV walker.
A pname_count of 256 therefore wraps the counter and keeps the loop
condition true indefinitely.
Factor the shared pname_list[] walk into one helper, widen the counter
to u32, and clamp pname_count against the entries that fit in the
descriptor body before iterating. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Reject u32 wrap in tb_property_entry_valid()
entry->value is u32 and entry->length is u16; the sum is performed in
u32 and wraps. A malicious XDomain peer can pick
value = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0
and passes the > block_len check. tb_property_parse() then passes
entry->value to parse_dwdata() as a dword offset into the property
block, reading attacker-directed memory far past the allocation.
For TEXT-typed entries with the "deviceid" or "vendorid" keys this
lands in xd->device_name / xd->vendor_name and is readable back via
the per-XDomain device_name / vendor_name sysfs attributes; the leak
is NUL-bounded (kstrdup() stops at the first zero byte) and
untargeted (the attacker picks a delta, not an absolute address).
DATA-typed entries are parsed into property->value.data but not
generically surfaced to userspace.
Use check_add_overflow() so a wrapped sum is rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Fix use-after-free in omap2430_probe()
In omap2430_probe(), of_node_put(np) is called prematurely before the
last access to np, leading to a use-after-free if the node's reference
count drops to zero. Move the of_node_put() calls after the last use of
np in both the success and error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: reset runtime state when cloning SAs
iptfs_clone_state() clones the IPTFS mode data with kmemdup(). This
copies runtime objects which must not be shared with the original SA,
including the embedded sk_buff_head, hrtimers, spinlock, and in-flight
reassembly/reorder state.
If xfrm_state_migrate() fails after clone_state() but before the later
init_state() call has reinitialized those fields, the cloned state can be
destroyed by xfrm_state_gc_task() with list and timer state copied from the
original SA. With queued packets this lets the clone splice and free skbs
owned by the original IPTFS queue, leading to use-after-free and
double-free reports in iptfs_destroy_state() and skb release paths.
Reinitialize the clone's runtime state before publishing it through
x->mode_data. Because clone_state() now publishes a destroyable mode_data
object before init_state(), take the mode callback module reference there.
Avoid taking it again from __iptfs_init_state() for the same object. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: hci: fix out-of-bounds read in HCP header parsing
Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read
packet->header from skb->data at function entry without first checking
that the buffer holds at least one byte. A malicious NFC peer can send
a 0-byte HCP frame that passes through the SHDLC layer and reaches
these functions, causing an out-of-bounds heap read of packet->header.
The same 0-byte frame, if queued as a non-final fragment, also causes
the reassembly loop to underflow msg_len to UINT_MAX, triggering
skb_over_panic() when the reassembled skb is written.
Fix this by adding a pskb_may_pull() check at the entry of each
function before packet->header is first accessed. The existing
pskb_may_pull() checks before the reassembled hcp_skb is cast to
struct hcp_packet remain in place to guard the 2-byte HCP message
header. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: Fix OOB write in wacom_hid_set_device_mode()
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: validate extension header length before copying to cmsg
ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR}
cmsgs (and their IPV6_2292* legacy counterparts) by trusting the
on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length.
The length was validated only at parse time (ipv6_parse_hopopts(),
etc.). An nftables payload-write expression can rewrite hdrlen after
parsing and before the skb reaches recvmsg; the write itself is
in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040
bytes from an 8-byte header. nftables is reachable from an
unprivileged user namespace, so this is an unprivileged
slab-out-of-bounds read:
BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540
put_cmsg+0x3ac/0x540
udpv6_recvmsg+0xca0/0x1250
sock_recvmsg+0xdf/0x190
____sys_recvmsg+0x1b1/0x620
Add ipv6_get_exthdr_len() which validates that at least two bytes
are accessible before reading the hdrlen field, then checks the
computed length against skb_tail_pointer(skb), returning 0 on
failure. Extension headers are kept in the linear skb area by
pskb_may_pull() during input, so skb_tail_pointer() is the correct
bound.
Use ipv6_get_exthdr_len() at all non-AH call sites: the five
standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR)
and the three standard cases in the extension-header walk loop
(DSTOPTS, ROUTING, default). AH retains an inline bounds check
because its length formula differs ((ptr[1]+2)<<2).
The walk loop also gets a pre-read bounds check at the top to
validate ptr before any case accesses ptr[0] or ptr[1].
When the walk loop detects a corrupted header, return from the
function instead of continuing to process later socket options. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: hw-consumer: fix use-after-free in error path
In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code
was using list_for_each_entry() to iterate through buffers while calling
iio_buffer_put() which can free the current buffer if refcount drops to 0.
The list_for_each_entry() loop macro then evaluates buf->head.next to
continue iteration, accessing the freed buffer.
Fix this by using list_for_each_entry_safe(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer
Use READ_ONCE() when reading entries/indices from the guest-accessible
Page State Change buffer to defend against TOCTOU bugs.
Don't bother with READ_ONCE()/WRITE_ONCE() for cases where KVM is writing
(and not consuming the result!), as the guest isn't supposed to touch the
buffer while it's being processed. I.e. using READ_ONCE() is all about
protecting against misbehaving guests. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2
(which traps) or ZCR_EL1 (which does not trap). KVM handles both in
different way:
- on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own
VL limit. This has the potential to break existing SW that relies
on the full LEN field to be stateful.
- on ZCR_EL1 access, we do absolutely nothing.
On restoring the SVE context for an L2 guest, we directly restore the
guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the
guest's view of the register was updated using the ZCR_EL2 accessor,
the value has already been sanitised (with the caveat mentioned above).
But if the guest used ZCR_EL1, the raw value is written into the HW,
and the L2 guest can now access VLs that it shouldn't.
Fix all the above by moving the VL capping to the restore points,
ensuring that:
- the HW is always programmed with a capped value, irrespective of
the accessor being used,
- the ZCR_EL2.LEN field is always completely stateful, irrespective
of the accessor being used.
Additionally, move ZCR_EL2 to be a sanitised register, ensuring that
only the LEN field is actually stateful. This requires some creative
construction of the RES0 mask, as the sysreg generation script does
not yet generate RAZ/WI fields.
[maz: rewrote commit message, tidy up access_zcr_el2()] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix UAF in iso_recv_frame
iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock
before using sk, with no reference held. A concurrent iso_sock_kill()
can free sk in that window, causing use-after-free on sk->sk_state and
sock_queue_rcv_skb().
Fix by replacing the bare pointer read with iso_sock_hold(conn), which
calls sock_hold() while the spinlock is held, atomically elevating the
refcount before the lock drops. Add a drop_put label so sock_put() is
called on all exit paths where the hold succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
memfd: deny writeable mappings when implying SEAL_WRITE
When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the
implied seal is set after the check that makes sure the memfd can not have
any writable mappings. This means one can use SEAL_EXEC to apply
SEAL_WRITE while having writeable mappings.
This breaks the contract that SEAL_WRITE provides and can be used by an
attacker to pass a memfd that appears to be write sealed but can still be
modified arbitrarily.
Fix this by adding the implied seals before the call for
mapping_deny_writable() is done. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in fib6_select_path()
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: bind uarg before filling zerocopy skb
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule. |
