Export limit exceeded: 346797 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (43333 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-3755 | 2026-04-15 | 9.1 Critical | ||
| Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Mitsubishi Electric Corporation MELSEC iQ-F Series CPU modules allows a remote unauthenticated attacker to read information in the product, to cause a Denial-of-Service (DoS) condition in MELSOFT connection, or to stop the operation of the CPU module (causing a DoS condtion on the CPU module), by sending specially crafted packets. The product is needed to reset for recovery. | ||||
| CVE-2025-48507 | 2 Amd, Arm | 3 Kria Som, Zynq Ultrascale+, Trusted Firmware-a | 2026-04-15 | N/A |
| The security state of the calling processor into Trusted Firmware (TF-A) is not used and could potentially allow non-secure processors access to secure memories, access to crypto operations, and the ability to turn on and off subsystems within the SOC. | ||||
| CVE-2025-48515 | 1 Amd | 5 Ryzen 5000 Series Desktop Processors, Ryzen 5000 Series Desktop Processors With Radeon Graphics, Ryzen 5000 Series Mobile Processors With Radeon Graphics and 2 more | 2026-04-15 | N/A |
| Insufficient parameter sanitization in AMD Secure Processor (ASP) Boot Loader could allow an attacker with access to SPIROM upgrade to overwrite the memory, potentially resulting in arbitrary code execution. | ||||
| CVE-2024-54090 | 2026-04-15 | 5.9 Medium | ||
| A vulnerability has been identified in APOGEE PXC Series (BACnet) (All versions), APOGEE PXC Series (P2 Ethernet) (All versions), TALON TC Series (BACnet) (All versions). Affected devices contain an out-of-bounds read in the memory dump function. This could allow an attacker with Medium (MED) or higher privileges to cause the device to enter an insecure cold start state. | ||||
| CVE-2023-47310 | 1 Mikrotik | 1 Routeros | 2026-04-15 | 6.5 Medium |
| A misconfiguration in the default settings of MikroTik RouterOS 7 and fixed in v7.14 allows incoming IPv6 UDP traceroute packets. | ||||
| CVE-2020-37042 | 3 Frigate, Frigate3, Winfrigate | 3 Frigate, Frigate Professional, Frigate 3 | 2026-04-15 | 8.4 High |
| Frigate Professional 3.36.0.9 contains a local buffer overflow vulnerability in the 'Find Computer' feature that allows attackers to execute arbitrary code by overflowing the computer name input field. Attackers can craft a malicious payload that triggers a buffer overflow, enabling code execution and launching calculator as a proof of concept. | ||||
| CVE-2025-3512 | 1 Qt | 1 Qt | 2026-04-15 | 3.3 Low |
| There is a Heap-based Buffer Overflow vulnerability in QTextMarkdownImporter. This requires an incorrectly formatted markdown file to be passed to QTextMarkdownImporter to trigger the overflow.This issue affects Qt from 6.8.0 to 6.8.4. Versions up to 6.6.0 are known to be unaffected, and the fix is in 6.8.4 and later. | ||||
| CVE-2020-36971 | 1 Nidesoft | 1 3gp Video Converter | 2026-04-15 | 8.4 High |
| Nidesoft 3GP Video Converter 2.6.18 contains a local stack buffer overflow vulnerability in the license registration parameter. Attackers can craft a malicious payload and paste it into the 'License Code' field to execute arbitrary code on the system. | ||||
| CVE-2025-7213 | 1 Fnkvision | 1 Fnk-gu2 | 2026-04-15 | 6.4 Medium |
| A vulnerability classified as critical has been found in FNKvision FNK-GU2 up to 40.1.7. Affected is an unknown function of the component UART Interface. The manipulation leads to on-chip debug and test interface with improper access control. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-34141 | 2026-04-15 | N/A | ||
| A reflected cross-site scripting (XSS) vulnerability exists in ETQ Reliance CG (legacy) platform within the `SQLConverterServlet` component. This vulnerability requires user interaction, such as clicking a crafted link, and may result in execution of unauthorized scripts in the user's context. The affected servlet was unnecessarily exposed to authenticated users and has since been disabled in version SE.2025.1. | ||||
| CVE-2020-36965 | 1 Verypdf | 1 Docprint Pro | 2026-04-15 | 8.4 High |
| docPrint Pro 8.0 contains a local buffer overflow vulnerability in the 'Add URL' input field that allows attackers to execute arbitrary code by overwriting memory. Attackers can craft a malicious payload that triggers a structured exception handler (SEH) overwrite to execute shellcode and gain remote system access. | ||||
| CVE-2023-46586 | 1 Weborf Project | 1 Weborf | 2026-04-15 | 9.1 Critical |
| cgi.c in weborf .0.17, 0.18, 0.19, and 0.20 (before 1.0) lacks '\0' termination of the path for CGI scripts because strncpy is misused. | ||||
| CVE-2025-34106 | 2026-04-15 | N/A | ||
| A buffer overflow vulnerability exists in PDF Shaper versions 3.5 and 3.6 when converting a crafted PDF file to an image using the 'Convert PDF to Image' functionality. An attacker can exploit this vulnerability by tricking a user into opening a maliciously crafted PDF file, leading to arbitrary code execution under the context of the user. This vulnerability has been verified on Windows XP, 7, 8, and 10 platforms using the PDFTools.exe component. | ||||
| CVE-2025-32907 | 1 Redhat | 3 Enterprise Linux, Rhel E4s, Rhel Eus | 2026-04-15 | 5.3 Medium |
| A flaw was found in libsoup. The implementation of HTTP range requests is vulnerable to a resource consumption attack. This flaw allows a malicious client to request the same range many times in a single HTTP request, causing the server to use large amounts of memory. This does not allow for a full denial of service. | ||||
| CVE-2023-46565 | 1 Osrg | 1 Gobgp | 2026-04-15 | 7.5 High |
| Buffer Overflow vulnerability in osrg gobgp commit 419c50dfac578daa4d11256904d0dc182f1a9b22 allows a remote attacker to cause a denial of service via the handlingError function in pkg/server/fsm.go. | ||||
| CVE-2024-5535 | 2 Openssl, Redhat | 7 Openssl, Enterprise Linux, Jboss Core Services and 4 more | 2026-04-15 | 9.1 Critical |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. | ||||
| CVE-2024-55407 | 2026-04-15 | 7.8 High | ||
| An issue in the DeviceloControl function of ITE Tech. Inc ITE IO Access v1.0.0.0 allows attackers to perform arbitrary port read and write actions via supplying crafted IOCTL requests. | ||||
| CVE-2025-4945 | 1 Redhat | 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more | 2026-04-15 | 3.7 Low |
| A flaw was found in the cookie parsing logic of the libsoup HTTP library, used in GNOME applications and other software. The vulnerability arises when processing the expiration date of cookies, where a specially crafted value can trigger an integer overflow. This may result in undefined behavior, allowing an attacker to bypass cookie expiration logic, causing persistent or unintended cookie behavior. The issue stems from improper validation of large integer inputs during date arithmetic operations within the cookie parsing routines. | ||||
| CVE-2024-5632 | 2026-04-15 | N/A | ||
| Longse NVR (Network Video Recorder) model NVR3608PGE2W, as well as products based on this device, create a WiFi network with a default password. A user is neither advised to change it during the installation process, nor such a need is described in the manual. As the cameras from the same kit connect automatically, it is very probable for the default password to be left unchanged. | ||||
| CVE-2025-32776 | 2026-04-15 | 5.5 Medium | ||
| OpenRazer is an open source driver and user-space daemon to control Razer device lighting and other features on GNU/Linux. By writing specially crafted data to the `matrix_custom_frame` file, an attacker can cause the custom kernel driver to read more bytes than provided by user space. This data will be written into the RGB arguments which will be sent to the USB device. This issue has been patched in v3.10.2. | ||||