| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: r8152: fix resume reset deadlock
rtl8152 can trigger device reset during reset which
potentially can result in a deadlock:
**** DPM device timeout after 10 seconds; 15 seconds until panic ****
Call Trace:
<TASK>
schedule+0x483/0x1370
schedule_preempt_disabled+0x15/0x30
__mutex_lock_common+0x1fd/0x470
__rtl8152_set_mac_address+0x80/0x1f0
dev_set_mac_address+0x7f/0x150
rtl8152_post_reset+0x72/0x150
usb_reset_device+0x1d0/0x220
rtl8152_resume+0x99/0xc0
usb_resume_interface+0x3e/0xc0
usb_resume_both+0x104/0x150
usb_resume+0x22/0x110
The problem is that rtl8152 resume calls reset under
tp->control mutex while reset basically re-enters rtl8152
and attempts to acquire the same tp->control lock once
again.
Reset INACCESSIBLE device outside of tp->control mutex
scope to avoid recursive mutex_lock() deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
procfs: avoid fetching build ID while holding VMA lock
Fix PROCMAP_QUERY to fetch optional build ID only after dropping mmap_lock
or per-VMA lock, whichever was used to lock VMA under question, to avoid
deadlock reported by syzbot:
-> #1 (&mm->mmap_lock){++++}-{4:4}:
__might_fault+0xed/0x170
_copy_to_iter+0x118/0x1720
copy_page_to_iter+0x12d/0x1e0
filemap_read+0x720/0x10a0
blkdev_read_iter+0x2b5/0x4e0
vfs_read+0x7f4/0xae0
ksys_read+0x12a/0x250
do_syscall_64+0xcb/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&sb->s_type->i_mutex_key#8){++++}-{4:4}:
__lock_acquire+0x1509/0x26d0
lock_acquire+0x185/0x340
down_read+0x98/0x490
blkdev_read_iter+0x2a7/0x4e0
__kernel_read+0x39a/0xa90
freader_fetch+0x1d5/0xa80
__build_id_parse.isra.0+0xea/0x6a0
do_procmap_query+0xd75/0x1050
procfs_procmap_ioctl+0x7a/0xb0
__x64_sys_ioctl+0x18e/0x210
do_syscall_64+0xcb/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(&mm->mmap_lock);
lock(&sb->s_type->i_mutex_key#8);
lock(&mm->mmap_lock);
rlock(&sb->s_type->i_mutex_key#8);
*** DEADLOCK ***
This seems to be exacerbated (as we haven't seen these syzbot reports
before that) by the recent:
777a8560fd29 ("lib/buildid: use __kernel_read() for sleepable context")
To make this safe, we need to grab file refcount while VMA is still locked, but
other than that everything is pretty straightforward. Internal build_id_parse()
API assumes VMA is passed, but it only needs the underlying file reference, so
just add another variant build_id_parse_file() that expects file passed
directly.
[akpm@linux-foundation.org: fix up kerneldoc] |
| A vulnerability has been identified in keylime where an attacker can exploit this flaw by registering a new agent using a different Trusted Platform Module (TPM) device but claiming an existing agent's unique identifier (UUID). This action overwrites the legitimate agent's identity, enabling the attacker to impersonate the compromised agent and potentially bypass security controls. |
| Umbraco is an ASP.NET CMS. From 14.0.0 to before 16.5.1 and 17.2.2, A broken object-level authorization vulnerability exists in a backoffice API endpoint that allows authenticated users to assign domain-related data to content nodes without proper authorization checks. The issue is caused by insufficient authorization enforcement on the affected API endpoint, whereby via an API call, domains can be set on content nodes that the editor does not have permission to access (either via user group privileges or start nodes). This vulnerability is fixed in 16.5.1 and 17.2.2. |
| Use of a Broken or Risky Cryptographic Algorithm vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android, WebClient (Config import, URI scheme handler, CLI --config modules) allows Retrieve Embedded Sensitive Data. This vulnerability is associated with program files flutter/lib/common.Dart, hbb_common/src/config.Rs and program routines parseRustdeskUri(), importConfig().
This issue affects RustDesk Client: through 1.4.5. |
| Fastify incorrectly accepts malformed `Content-Type` headers containing trailing characters after the subtype token, in violation of RFC 9110 ยง8.3.1(https://httpwg.org/specs/rfc9110.html#field.content-type). For example, a request sent with Content-Type: application/json garbage passes validation and is processed normally, rather than being rejected with 415 Unsupported Media Type.
When regex-based content-type parsers are in use (a documented Fastify feature), the malformed value is matched against registered parsers using the full string including the trailing garbage. This means a request with an invalid content-type may be routed to and processed by a parser it should never have reached.
Impact:
An attacker can send requests with RFC-invalid Content-Type headers that bypass validity checks, reach content-type parser matching, and be processed by the server. Requests that should be rejected at the validation stage are instead handled as if the content-type were valid.
Workarounds:
Deploy a WAF rule to protect against this
Fix:
The fix is available starting with v5.8.1. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: trace: fix snapshot deadlock with sbi ecall
If sbi_ecall.c's functions are traceable,
echo "__sbi_ecall:snapshot" > /sys/kernel/tracing/set_ftrace_filter
may get the kernel into a deadlock.
(Functions in sbi_ecall.c are excluded from tracing if
CONFIG_RISCV_ALTERNATIVE_EARLY is set.)
__sbi_ecall triggers a snapshot of the ringbuffer. The snapshot code
raises an IPI interrupt, which results in another call to __sbi_ecall
and another snapshot...
All it takes to get into this endless loop is one initial __sbi_ecall.
On RISC-V systems without SSTC extension, the clock events in
timer-riscv.c issue periodic sbi ecalls, making the problem easy to
trigger.
Always exclude the sbi_ecall.c functions from tracing to fix the
potential deadlock.
sbi ecalls can easiliy be logged via trace events, excluding ecall
functions from function tracing is not a big limitation. |
| Bio-Formats versions up to and including 8.3.0 contain an XML External Entity (XXE) vulnerability in the Leica Microsystems metadata parsing component (e.g., XLEF). The parser uses an insecurely configured DocumentBuilderFactory when processing Leica XML-based metadata files, allowing external entity expansion and external DTD loading. A crafted metadata file can trigger outbound network requests (SSRF), access local system resources where readable, or cause a denial of service during XML parsing. |
| FileBrowser Quantum is a free, self-hosted, web-based file manager. Prior to 1.3.1-beta and 1.2.2-stable, the remediation for CVE-2026-27611 is incomplete. Password protected shares still disclose tokenized downloadURL via /public/api/share/info. This vulnerability is fixed in 1.3.1-beta and 1.2.2-stable. |
| Dark Reader is an accessibility browser extension that makes web pages colors dark. The dynamic dark mode feature of the extension works by analyzing the colors of web pages found in CSS style sheet files. In order to analyze cross-origin style sheets (stored on websites different from the original web page), Dark Reader requests such files via a background worker, ensuring the request is performed with no credentials and that the content type of the response is a CSS file. Prior to Dark Reader 4.9.117, this style content was assigned to an HTML Style Element in order to parse and loop through style declarations, and also stored in page's Session Storage for performance gains. This could allow a website author to request a style sheet from a locally running web server, for example by having a link pointing to `http[:]//localhost[:]8080/style[.]css`. The brute force of the host name, port and file name would be unlikely due to performance impact, that would cause the browser tab to hang shortly, but it could be possible to request a style sheet if the full URL was known in advance. As per December 18, 2025 there is no known exploit of the issue. The problem has been fixed in version 4.9.117 on December 3, 2025. The style sheets are now parsed using modern Constructed Style Sheets API and the contents of cross-origin style sheets is no longer stored in page's Session Storage. Version 4.9.118 (December 8, 2025) restricts cross-origin requests to localhost aliases, IP addresses, hosts with ports and non-HTTPS resources. The absolute majority of users have received an update 4.1.117 or 4.9.118 automatically within a week. However users must ensure their automatic updates are not blocked and they are using the latest version of the extension by going to chrome://extensions or about:addons pages in browser settings. Users utilizing manual builds must upgrade to version 4.9.118 and above. Developers using `darkreader` NPM package for their own websites are likely not affected, but must ensure the function passed to `setFetchMethod()` for performing cross-origin requests works within the intended scope. Developers using custom forks of earlier versions of Dark Reader to build other extensions or integrating into their apps or browsers must ensure they perform cross-origin requests safely and the responses are not accessible outside of the app or extension. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (acpi_power_meter) Fix deadlocks related to acpi_power_meter_notify()
The acpi_power_meter driver's .notify() callback function,
acpi_power_meter_notify(), calls hwmon_device_unregister() under a lock
that is also acquired by callbacks in sysfs attributes of the device
being unregistered which is prone to deadlocks between sysfs access and
device removal.
Address this by moving the hwmon device removal in
acpi_power_meter_notify() outside the lock in question, but notice
that doing it alone is not sufficient because two concurrent
METER_NOTIFY_CONFIG notifications may be attempting to remove the
same device at the same time. To prevent that from happening, add a
new lock serializing the execution of the switch () statement in
acpi_power_meter_notify(). For simplicity, it is a static mutex
which should not be a problem from the performance perspective.
The new lock also allows the hwmon_device_register_with_info()
in acpi_power_meter_notify() to be called outside the inner lock
because it prevents the other notifications handled by that function
from manipulating the "resource" object while the hwmon device based
on it is being registered. The sending of ACPI netlink messages from
acpi_power_meter_notify() is serialized by the new lock too which
generally helps to ensure that the order of handling firmware
notifications is the same as the order of sending netlink messages
related to them.
In addition, notice that hwmon_device_register_with_info() may fail
in which case resource->hwmon_dev will become an error pointer,
so add checks to avoid attempting to unregister the hwmon device
pointer to by it in that case to acpi_power_meter_notify() and
acpi_power_meter_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix deadlock in RSS config read
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "f2fs: block cache/dio write during f2fs_enable_checkpoint()"
This reverts commit 196c81fdd438f7ac429d5639090a9816abb9760a.
Original patch may cause below deadlock, revert it.
write remount
- write_begin
- lock_page --- lock A
- prepare_write_begin
- f2fs_map_lock
- f2fs_enable_checkpoint
- down_write(cp_enable_rwsem) --- lock B
- sync_inode_sb
- writepages
- lock_page --- lock A
- down_read(cp_enable_rwsem) --- lock A |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix dead lock while flushing management frames
Commit [1] converted the management transmission work item into a
wiphy work. Since a wiphy work can only run under wiphy lock
protection, a race condition happens in below scenario:
1. a management frame is queued for transmission.
2. ath12k_mac_op_flush() gets called to flush pending frames associated
with the hardware (i.e, vif being NULL). Then in ath12k_mac_flush()
the process waits for the transmission done.
3. Since wiphy lock has been taken by the flush process, the transmission
work item has no chance to run, hence the dead lock.
>From user view, this dead lock results in below issue:
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticated
wlp8s0: associate with xxxxxx (try 1/3)
wlp8s0: aborting association with xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING)
ath12k_pci 0000:08:00.0: failed to flush mgmt transmit queue, mgmt pkts pending 1
The dead lock can be avoided by invoking wiphy_work_flush() to proactively
run the queued work item. Note actually it is already present in
ath12k_mac_op_flush(), however it does not protect the case where vif
being NULL. Hence move it ahead to cover this case as well.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
romfs: check sb_set_blocksize() return value
romfs_fill_super() ignores the return value of sb_set_blocksize(), which
can fail if the requested block size is incompatible with the block
device's configuration.
This can be triggered by setting a loop device's block size larger than
PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs
filesystem on that device.
When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the
device has logical_block_size=32768, bdev_validate_blocksize() fails
because the requested size is smaller than the device's logical block
size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and
continues mounting.
The superblock's block size remains at the device's logical block size
(32768). Later, when sb_bread() attempts I/O with this oversized block
size, it triggers a kernel BUG in folio_set_bh():
kernel BUG at fs/buffer.c:1582!
BUG_ON(size > PAGE_SIZE);
Fix by checking the return value of sb_set_blocksize() and failing the
mount with -EINVAL if it returns 0. |
| Products.isurlinportal is a replacement for isURLInPortal method in Plone. Prior to versions 2.1.0, 3.1.0, and 4.0.0, a url /login?came_from=////evil.example may redirect to an external website after login. This issue has been patched in versions 2.1.0, 3.1.0, and 4.0.0. |
| StudioCMS is a server-side-rendered, Astro native, headless content management system. Prior to 0.4.0, the DELETE /studiocms_api/dashboard/api-tokens endpoint allows any authenticated user with editor privileges or above to revoke API tokens belonging to any other user, including admin and owner accounts. The handler accepts tokenID and userID directly from the request payload without verifying token ownership, caller identity, or role hierarchy. This enables targeted denial of service against critical integrations and automations. This vulnerability is fixed in 0.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: don't use BUG_ON() in hfsplus_create_attributes_file()
When the volume header contains erroneous values that do not reflect
the actual state of the filesystem, hfsplus_fill_super() assumes that
the attributes file is not yet created, which later results in hitting
BUG_ON() when hfsplus_create_attributes_file() is called. Replace this
BUG_ON() with -EIO error with a message to suggest running fsck tool. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac()
Callers of wdev_chandef() must hold the wiphy mutex.
But the worker cfg80211_propagate_cac_done_wk() never takes the lock.
Which triggers the warning below with the mesh_peer_connected_dfs
test from hostapd and not (yet) released mac80211 code changes:
WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165
Modules linked in:
CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf
Workqueue: cfg80211 cfg80211_propagate_cac_done_wk
Stack:
00000000 00000001 ffffff00 6093267c
00000000 6002ec30 6d577c50 60037608
00000000 67e8d108 6063717b 00000000
Call Trace:
[<6002ec30>] ? _printk+0x0/0x98
[<6003c2b3>] show_stack+0x10e/0x11a
[<6002ec30>] ? _printk+0x0/0x98
[<60037608>] dump_stack_lvl+0x71/0xb8
[<6063717b>] ? wdev_chandef+0x60/0x165
[<6003766d>] dump_stack+0x1e/0x20
[<6005d1b7>] __warn+0x101/0x20f
[<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d
[<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<600b11a2>] ? mark_held_locks+0x5a/0x6e
[<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d
[<60052e53>] ? unblock_signals+0x3a/0xe7
[<60052f2d>] ? um_set_signals+0x2d/0x43
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<607508b2>] ? lock_is_held_type+0x207/0x21f
[<6063717b>] wdev_chandef+0x60/0x165
[<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f
[<60052f00>] ? um_set_signals+0x0/0x43
[<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a
[<6007e460>] process_scheduled_works+0x3bc/0x60e
[<6007d0ec>] ? move_linked_works+0x4d/0x81
[<6007d120>] ? assign_work+0x0/0xaa
[<6007f81f>] worker_thread+0x220/0x2dc
[<600786ef>] ? set_pf_worker+0x0/0x57
[<60087c96>] ? to_kthread+0x0/0x43
[<6008ab3c>] kthread+0x2d3/0x2e2
[<6007f5ff>] ? worker_thread+0x0/0x2dc
[<6006c05b>] ? calculate_sigpending+0x0/0x56
[<6003b37d>] new_thread_handler+0x4a/0x64
irq event stamp: 614611
hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf
hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf
softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985
softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985 |
| StudioCMS is a server-side-rendered, Astro native, headless content management system. Prior to 0.4.0, the /studiocms_api/dashboard/api-tokens endpoint allows any authenticated user (at least Editor) to generate API tokens for any other user, including owner and admin accounts. The endpoint fails to validate whether the requesting user is authorized to create tokens on behalf of the target user ID, resulting in a full privilege escalation. This vulnerability is fixed in 0.4.0. |
