| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenBao is an open source identity-based secrets management system. Prior to version 2.5.2, OpenBao installations that have an OIDC/JWT authentication method enabled and a role with `callback_mode=direct` configured are vulnerable to XSS via the `error_description` parameter on the page for a failed authentication. This allows an attacker access to the token used in the Web UI by a victim. The `error_description` parameter has been replaced with a static error message in v2.5.2. The vulnerability can be mitigated by removing any roles with `callback_mode` set to `direct`. |
| A flaw has been found in Tenda F453 1.0.0.3. This affects the function fromPPTPUserSetting of the file /goform/PPTPUserSetting of the component httpd. This manipulation of the argument delno causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. |
| A vulnerability was found in Tenda 4G06 04.06.01.29. This vulnerability affects the function fromDhcpListClient of the file /goform/DhcpListClient of the component Endpoint. Performing a manipulation of the argument page results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. |
| A security flaw has been discovered in Belkin F9K1122 1.00.33. The affected element is the function formCrossBandSwitch of the file /goform/formCrossBandSwitch of the component Parameter Handler. The manipulation of the argument webpage results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Belkin F9K1122 1.00.33. This affects the function formSetSystemSettings of the file /goform/formSetSystemSettings of the component Setting Handler. Such manipulation of the argument webpage leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in Tenda FH1201 1.2.0.14(408). Affected is the function formWrlExtraSet of the file /goform/WrlExtraSet of the component Parameter Handler. Executing a manipulation of the argument GO can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. |
| nanobot is a personal AI assistant. Prior to version 0.1.6, an indirect prompt injection vulnerability exists in the email channel processing module (`nanobot/channels/email.py`), allowing a remote, unauthenticated attacker to execute arbitrary LLM instructions (and subsequently, system tools) without any interaction from the bot owner. By sending an email containing malicious prompts to the bot's monitored email address, the bot automatically polls, ingests, and processes the email content as highly trusted input, fully bypassing channel isolation and resulting in a stealthy, zero-click attack. Version 0.1.6 patches the issue. |
| A flaw was found in GIMP. This issue is a heap buffer over-read in GIMP PCX file loader due to an off-by-one error. A remote attacker could exploit this by convincing a user to open a specially crafted PCX image. Successful exploitation could lead to out-of-bounds memory disclosure and a possible application crash, resulting in a Denial of Service (DoS). |
| An unauthenticated attacker who knows the target device's serial number, can generate the default administrator password for the device. An unauthenticated attacker can first discover the target device's serial number via CVE-2024-51977 over HTTP/HTTPS/IPP, or via a PJL request, or via an SNMP request. |
| A vulnerability was identified in dloebl CGIF up to 0.5.2. This vulnerability affects the function cgif_addframe of the file src/cgif.c of the component GIF Image Handler. The manipulation of the argument width/height leads to integer overflow. The attack may be initiated remotely. The identifier of the patch is b0ba830093f4317a5d1f345715d2fa3cd2dab474. It is suggested to install a patch to address this issue. |
| The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack. |
| In DeviceId of DeviceId.java, there is a possible desync in persistence due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| NATS nats-server before 2.7.2 has Incorrect Access Control. Any authenticated user can obtain the privileges of the System account by misusing the "dynamically provisioned sandbox accounts" feature. |
| An integer overflow in NATS Server before 2.0.2 allows a remote attacker to crash the server by sending a crafted request. If authentication is enabled, then the remote attacker must have first authenticated. |
| Weak Authentication vulnerability in PickPlugins User Verification user-verification allows Authentication Abuse.This issue affects User Verification: from n/a through <= 2.0.45. |
| Improper Validation of Specified Quantity in Input vulnerability in GalleryCreator SimpLy Gallery simply-gallery-block allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects SimpLy Gallery: from n/a through <= 3.3.2. |
| ORY Oathkeeper is an Identity & Access Proxy (IAP) and Access Control Decision API that authorizes HTTP requests based on sets of Access Rules. Versions prior to 26.2.0 are vulnerable to authentication bypass due to cache key confusion. The `oauth2_introspection` authenticator cache does not distinguish tokens that were validated with different introspection URLs. An attacker can therefore legitimately use a token to prime the cache, and subsequently use the same token for rules that use a different introspection server. Ory Oathkeeper has to be configured with multiple `oauth2_introspection` authenticator servers, each accepting different tokens. The authenticators also must be configured to use caching. An attacker has to have a way to gain a valid token for one of the configured introspection servers. Starting in version 26.2.0, Ory Oathkeeper includes the introspection server URL in the cache key, preventing confusion of tokens. Update to the patched version of Ory Oathkeeper. If that is not immediately possible, disable caching for `oauth2_introspection` authenticators. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| A weakness has been identified in Wavlink WL-NU516U1 260227. This vulnerability affects the function ftext of the file /cgi-bin/nas.cgi. This manipulation of the argument Content-Length causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Impact:
A bad regular expression is generated any time you have three or more parameters within a single segment, separated by something that is not a period (.). For example, /:a-:b-:c or /:a-:b-:c-:d. The backtrack protection added in path-to-regexp@0.1.12 only prevents ambiguity for two parameters. With three or more, the generated lookahead does not block single separator characters, so capture groups overlap and cause catastrophic backtracking.
Patches:
Upgrade to path-to-regexp@0.1.13
Custom regex patterns in route definitions (e.g., /:a-:b([^-/]+)-:c([^-/]+)) are not affected because they override the default capture group.
Workarounds:
All versions can be patched by providing a custom regular expression for parameters after the first in a single segment. As long as the custom regular expression does not match the text before the parameter, you will be safe. For example, change /:a-:b-:c to /:a-:b([^-/]+)-:c([^-/]+).
If paths cannot be rewritten and versions cannot be upgraded, another alternative is to limit the URL length. |
