| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the CLI of Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an authenticated, local attacker to execute arbitrary commands as root by supplying a crafted file to the affected system.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by uploading a crafted file to the affected system. A successful exploit could allow the attacker to perform command injection attacks on an affected system and elevate their privileges as the root user.
To exploit this vulnerability, the attacker must have netadmin privileges on the affected system. This would require valid credentials or exploitation of or . Cisco is not aware of successful exploitation by other methods. Cisco has observed limited cases where the exploitation of this bug resulted in a configuration change pushed to edge devices.
Cisco recommends that customers upgrade to the fixed software that is documented in the that was published on May 14, 2026, and verify the configuration of the edge devices. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: safe_serial: fix memory corruption with small endpoint
Make sure that the bulk-out buffer size is at least eight bytes to avoid
user-controlled slab corruption in "safe" mode should a malicious device
report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: cypress_m8: fix memory corruption with small endpoint
Make sure that the interrupt-out endpoint max packet size is at least
eight bytes to avoid user-controlled slab corruption or NULL-pointer
dereference should a malicious device report a smaller size. |
| IBM Langflow OSS 1.0.0 through 1.10.0 Langflow 1.9.0 could allow server-side request forgery (SSRF) due to insecure default configuration and incomplete enforcement of the SSRF protection mechanism. |
| The Free Builder for Elementor WordPress plugin before 1.6.7 does not sanitise submitted contact form field values before storing them and outputting them in the admin dashboard, allowing unauthenticated attackers to perform Stored Cross-Site Scripting attacks that execute when a logged-in administrator views the form submissions. |
| DOMPurify is a DOM-only cross-site scripting sanitizer for HTML, MathML, and SVG. Prior to 3.4.7, DOMPurify IN_PLACE sanitization could skip shadow contents attached to an element inside <template>.content, allowing attacker-controlled markup such as event handlers, JavaScript URLs, or scripts to survive and execute when an application cloned and inserted the sanitized template. This issue is fixed in version 3.4.7. |
| Low-privileged authenticated Server-Side Request Forgery (SSRF)
vulnerability in Apache Syncope via Connectors and Resources check.
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.6, from 4.1.0-M0 through 4.1.1.
Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue. |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the denylist that neutralizes dangerous file uploads (`Helper::$restricted_extensions`) is incomplete: it does not cover the `.pht` extension. The authenticated upload endpoint `POST /uploads/upload` (`SecureController@upload`) stores files with their original extension into the web-accessible directory `storage/app/public/uploads/` (served at `/storage/uploads/`). On the standard Apache + `libapache2-mod-php` deployment, the default handler `<FilesMatch ".+\.ph(ar|p[3457]?|t|tml)$">` executes `.pht`, so **any authenticated agent can upload a `.pht` web shell and run arbitrary commands as the web-server user** (`www-data`). This is a direct bypass of the fix for CVE-2025-48471, which added `phtml`/`phar` but not `pht` (nor `phtm`, `phps`). Version 1.8.224 contains an updated fix. |
| A weakness has been identified in D-Link DNS-320 1.0.2. The impacted element is an unknown function of the file /web/jquery/uploader/uploadify.php. This manipulation of the argument https:/ucn9h68n9289.feishu.cn/wiki/JJcTwHz7aiKeq6kSItMcoeSUnMc?from=from_copylink causes unrestricted upload. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. |
| Meshtastic is an open source mesh networking solution. Prior to version 2.7.23.b246bcd, a single node advertising a User.long_name that contains a malformed character encoding can render other radios unusable over BLE when managed through the iOS app. The malformed name does not need to be maliciously crafted — it can arise from ordinary buffer truncation and has been observed occurring naturally in the wild. At least one code path could place a null terminator in the middle of a multibyte sequence, leaving a malformed User.long_name in the node database. The problem surfaced downstream: the iOS app enforced encoding validation and therefore cannot parse a node database once it contains a poisoned entry. This caused BLE sync to enter a fail/retry loop, resulting in loss of control over the affected device. For a typical user managing their radio with the iOS app, the device becomes effectively unusable until the poisoned node ages out of the on-device database, or unless they have an alternate management path (e.g., the Python CLI, which can be used to identify and remove the offending entries manually). Because the malformed name propagates through the mesh, the temporary presence of a single affected node can degrade BLE management for iOS users across a wide geographical area for an extended period. Less technical users have no straightforward recovery path. Starting in version 2.7.23.b246bcd, the firmware has added input sanitization and regression tests demonstrating recovery for already-poisoned devices. The apps have also taken steps to ensure more graceful handling of malformed encoding sequences as well. |
| Tornado is a Python web framework and asynchronous networking library. Prior to 6.5.6, SimpleAsyncHTTPClient shallow-copied redirected requests and removed only the Host header, leaving Authorization, auth_username, auth_password, and auth_mode in place when a redirect changed scheme, host, or port. This issue is fixed in version 6.5.6. |
| A vulnerability was found in newpanjing simpleui 2026.01.13. This affects the function self.get_action of the file simpleui/admin.py of the component AjaxAdmin AJAX Endpoint. Performing a manipulation results in missing authentication. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mxuport: fix memory corruption with small endpoint
Make sure that the bulk-out endpoint max packet size is at least eight
bytes to avoid user-controlled slab corruption should a malicious device
report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix memory corruption with small endpoints
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected. |
| Directus is a real-time API and App dashboard for managing SQL database content. Prior to 12.0.0, the SSRF protection on Directus's file-import-from-URL feature can be bypassed using the address 0.0.0.0 because api/src/request/is-denied-ip.ts treats 0.0.0.0 as a keyword for local interfaces but never blocks the literal address itself. On Linux and macOS, connecting to 0.0.0.0 reaches localhost, so an authenticated user with file-upload rights can make the server fetch internal services through the /files/import endpoint and retrieve the response as a downloadable file. This issue is fixed in version 12.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values. |
| IBM Storage Protect Client 8.1.0.0 through 8.1.27.0, 8.1.27.1, and 8.2.0.0 through 8.2.1.0 IBM Storage Protect is vulnerable to a heap-based buffer overflow, caused by improper bounds checking. A remote attacker could overflow a buffer and execute arbitrary code on the system or cause the server to crash. |
| The bpost-shipping-platform WordPress plugin before 3.2.3 does not properly sanitize a parameter before using it in a SQL query during WooCommerce order submission, allowing unauthenticated attackers to perform time-based blind SQL injection on stores running this bpost-shipping-platform WordPress plugin before 3.2.3. |
| DO NOT USE THIS CVE RECORD. ConsultIDs: none. Reason: This record was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none. |
| A vulnerability was determined in D-Link DNS-320 1.0.2. This issue affects some unknown processing of the file /web/web_file/upload.php. Executing a manipulation of the argument File can lead to unrestricted upload. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. |
