| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Add support for Van Gogh SoC
The ROG Xbox Ally (non-X) SoC features a similar architecture to the
Steam Deck. While the Steam Deck supports S3 (s2idle causes a crash),
this support was dropped by the Xbox Ally which only S0ix suspend.
Since the handler is missing here, this causes the device to not suspend
and the AMD GPU driver to crash while trying to resume afterwards due to
a power hang. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: microchip: Don't free uninitialized ksz_irq
If something goes wrong at setup, ksz_irq_free() can be called on
uninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). It
leads to freeing uninitialized IRQ numbers and/or domains.
Use dsa_switch_for_each_user_port_continue_reverse() in the error path
to iterate only over the fully initialized ports. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: reduce XDP no_direct return section to fix race
As explain in commit fa349e396e48 ("veth: Fix race with AF_XDP exposing
old or uninitialized descriptors") for veth there is a chance after
napi_complete_done() that another CPU can manage start another NAPI
instance running veth_pool(). For NAPI this is correctly handled as the
napi_schedule_prep() check will prevent multiple instances from getting
scheduled, but for the remaining code in veth_pool() this can run
concurrent with the newly started NAPI instance.
The problem/race is that xdp_clear_return_frame_no_direct() isn't
designed to be nested.
Prior to commit 401cb7dae813 ("net: Reference bpf_redirect_info via
task_struct on PREEMPT_RT.") the temporary BPF net context
bpf_redirect_info was stored per CPU, where this wasn't an issue. Since
this commit the BPF context is stored in 'current' task_struct. When
running veth in threaded-NAPI mode, then the kthread becomes the storage
area. Now a race exists between two concurrent veth_pool() function calls
one exiting NAPI and one running new NAPI, both using the same BPF net
context.
Race is when another CPU gets within the xdp_set_return_frame_no_direct()
section before exiting veth_pool() calls the clear-function
xdp_clear_return_frame_no_direct(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing header
The driver expects to receive a struct gs_host_frame in
gs_usb_receive_bulk_callback().
Use struct_group to describe the header of the struct gs_host_frame and
check that we have at least received the header before accessing any
members of it.
To resubmit the URB, do not dereference the pointer chain
"dev->parent->hf_size_rx" but use "parent->hf_size_rx" instead. Since
"urb->context" contains "parent", it is always defined, while "dev" is not
defined if the URB it too short. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
The acpi_get_first_physical_node() function can return NULL, in which
case the get_device() function also returns NULL, but this value is
then dereferenced without checking,so add a check to prevent a crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix memory leak in __blkdev_issue_zero_pages
Move the fatal signal check before bio_alloc() to prevent a memory
leak when BLKDEV_ZERO_KILLABLE is set and a fatal signal is pending.
Previously, the bio was allocated before checking for a fatal signal.
If a signal was pending, the code would break out of the loop without
freeing or chaining the just-allocated bio, causing a memory leak.
This matches the pattern already used in __blkdev_issue_write_zeroes()
where the signal check precedes the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix divide-by-zero in exfat_allocate_bitmap
The variable max_ra_count can be 0 in exfat_allocate_bitmap(),
which causes a divide-by-zero error in the subsequent modulo operation
(i % max_ra_count), leading to a system crash.
When max_ra_count is 0, it means that readahead is not used. This patch
load the bitmap without readahead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: vxlan: prevent NULL deref in vxlan_xmit_one
Neither sock4 nor sock6 pointers are guaranteed to be non-NULL in
vxlan_xmit_one, e.g. if the iface is brought down. This can lead to the
following NULL dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000010
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:vxlan_xmit_one+0xbb3/0x1580
Call Trace:
vxlan_xmit+0x429/0x610
dev_hard_start_xmit+0x55/0xa0
__dev_queue_xmit+0x6d0/0x7f0
ip_finish_output2+0x24b/0x590
ip_output+0x63/0x110
Mentioned commits changed the code path in vxlan_xmit_one and as a side
effect the sock4/6 pointer validity checks in vxlan(6)_get_route were
lost. Fix this by adding back checks.
Since both commits being fixed were released in the same version (v6.7)
and are strongly related, bundle the fixes in a single commit. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix exclusive map memory leak
When excl_prog_hash is 0 and excl_prog_hash_size is non-zero, the map also
needs to be freed. Otherwise, the map memory will not be reclaimed, just
like the memory leak problem reported by syzbot [1].
syzbot reported:
BUG: memory leak
backtrace (crc 7b9fb9b4):
map_create+0x322/0x11e0 kernel/bpf/syscall.c:1512
__sys_bpf+0x3556/0x3610 kernel/bpf/syscall.c:6131 |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Prevent recursive memory reclaim
Function new_inode() returns a new inode with inode->i_mapping->gfp_mask
set to GFP_HIGHUSER_MOVABLE. This value includes the __GFP_FS flag, so
allocations in that address space can recurse into filesystem memory
reclaim. We don't want that to happen because it can consume a
significant amount of stack memory.
Worse than that is that it can also deadlock: for example, in several
places, gfs2_unstuff_dinode() is called inside filesystem transactions.
This calls filemap_grab_folio(), which can allocate a new folio, which
can trigger memory reclaim. If memory reclaim recurses into the
filesystem and starts another transaction, a deadlock will ensue.
To fix these kinds of problems, prevent memory reclaim from recursing
into filesystem code by making sure that the gfp_mask of inode address
spaces doesn't include __GFP_FS.
The "meta" and resource group address spaces were already using GFP_NOFS
as their gfp_mask (which doesn't include __GFP_FS). The default value
of GFP_HIGHUSER_MOVABLE is less restrictive than GFP_NOFS, though. To
avoid being overly limiting, use the default value and only knock off
the __GFP_FS flag. I'm not sure if this will actually make a
difference, but it also shouldn't hurt.
This patch is loosely based on commit ad22c7a043c2 ("xfs: prevent stack
overflows from page cache allocation").
Fixes xfstest generic/273. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: allocate s_dio_done_wq for async reads as well
Since commit 222f2c7c6d14 ("iomap: always run error completions in user
context"), read error completions are deferred to s_dio_done_wq. This
means the workqueue also needs to be allocated for async reads. |
| In the Linux kernel, the following vulnerability has been resolved:
md: init bioset in mddev_init
IO operations may be needed before md_run(), such as updating metadata
after writing sysfs. Without bioset, this triggers a NULL pointer
dereference as below:
BUG: kernel NULL pointer dereference, address: 0000000000000020
Call Trace:
md_update_sb+0x658/0xe00
new_level_store+0xc5/0x120
md_attr_store+0xc9/0x1e0
sysfs_kf_write+0x6f/0xa0
kernfs_fop_write_iter+0x141/0x2a0
vfs_write+0x1fc/0x5a0
ksys_write+0x79/0x180
__x64_sys_write+0x1d/0x30
x64_sys_call+0x2818/0x2880
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Reproducer
```
mdadm -CR /dev/md0 -l1 -n2 /dev/sd[cd]
echo inactive > /sys/block/md0/md/array_state
echo 10 > /sys/block/md0/md/new_level
```
mddev_init() can only be called once per mddev, no need to test if bioset
has been initialized anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
md: avoid repeated calls to del_gendisk
There is a uaf problem which is found by case 23rdev-lifetime:
Oops: general protection fault, probably for non-canonical address 0xdead000000000122
RIP: 0010:bdi_unregister+0x4b/0x170
Call Trace:
<TASK>
__del_gendisk+0x356/0x3e0
mddev_unlock+0x351/0x360
rdev_attr_store+0x217/0x280
kernfs_fop_write_iter+0x14a/0x210
vfs_write+0x29e/0x550
ksys_write+0x74/0xf0
do_syscall_64+0xbb/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff5250a177e
The sequence is:
1. rdev remove path gets reconfig_mutex
2. rdev remove path release reconfig_mutex in mddev_unlock
3. md stop calls do_md_stop and sets MD_DELETED
4. rdev remove path calls del_gendisk because MD_DELETED is set
5. md stop path release reconfig_mutex and calls del_gendisk again
So there is a race condition we should resolve. This patch adds a
flag MD_DO_DELETE to avoid the race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Fix NULL event access and potential PEBS record loss
When intel_pmu_drain_pebs_icl() is called to drain PEBS records, the
perf_event_overflow() could be called to process the last PEBS record.
While perf_event_overflow() could trigger the interrupt throttle and
stop all events of the group, like what the below call-chain shows.
perf_event_overflow()
-> __perf_event_overflow()
->__perf_event_account_interrupt()
-> perf_event_throttle_group()
-> perf_event_throttle()
-> event->pmu->stop()
-> x86_pmu_stop()
The side effect of stopping the events is that all corresponding event
pointers in cpuc->events[] array are cleared to NULL.
Assume there are two PEBS events (event a and event b) in a group. When
intel_pmu_drain_pebs_icl() calls perf_event_overflow() to process the
last PEBS record of PEBS event a, interrupt throttle is triggered and
all pointers of event a and event b are cleared to NULL. Then
intel_pmu_drain_pebs_icl() tries to process the last PEBS record of
event b and encounters NULL pointer access.
To avoid this issue, move cpuc->events[] clearing from x86_pmu_stop()
to x86_pmu_del(). It's safe since cpuc->active_mask or
cpuc->pebs_enabled is always checked before access the event pointer
from cpuc->events[]. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: clear extent cache after moving/defragmenting extents
The extent map cache can become stale when extents are moved or
defragmented, causing subsequent operations to see outdated extent flags.
This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters().
The problem occurs when:
1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED
2. ioctl(FITRIM) triggers ocfs2_move_extents()
3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2)
4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent()
which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0)
5. The extent map cache is not invalidated after the move
6. Later write() operations read stale cached flags (0x2) but disk has
updated flags (0x0), causing a mismatch
7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggers
Fix by clearing the extent map cache after each extent move/defrag
operation in __ocfs2_move_extents_range(). This ensures subsequent
operations read fresh extent data from disk. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: alienware-wmi-wmax: Fix NULL pointer dereference in sleep handlers
Devices without the AWCC interface don't initialize `awcc`. Add a check
before dereferencing it in sleep handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: make sure the cdev fd is still active before emitting events
With the final call to fput() on a file descriptor, the release action
may be deferred and scheduled on a work queue. The reference count of
that descriptor is still zero and it must not be used. It's possible
that a GPIO change, we want to notify the user-space about, happens
AFTER the reference count on the file descriptor associated with the
character device went down to zero but BEFORE the .release() callback
was called from the workqueue and so BEFORE we unregistered from the
notifier.
Using the regular get_file() routine in this situation triggers the
following warning:
struct file::f_count incremented from zero; use-after-free condition present!
So use the get_file_active() variant that will return NULL on file
descriptors that have been or are being released. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ctcm: Fix double-kfree
The function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionally
from function 'ctcmpc_unpack_skb'. It frees passed mpcginfo.
After that a call to function 'kfree' in function 'ctcmpc_unpack_skb'
frees it again.
Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'.
Bug detected by the clang static analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: aead - Fix reqsize handling
Commit afddce13ce81d ("crypto: api - Add reqsize to crypto_alg")
introduced cra_reqsize field in crypto_alg struct to replace type
specific reqsize fields. It looks like this was introduced specifically
for ahash and acomp from the commit description as subsequent commits
add necessary changes in these alg frameworks.
However, this is being recommended for use in all crypto algs
instead of setting reqsize using crypto_*_set_reqsize(). Using
cra_reqsize in aead algorithms, hence, causes memory corruptions and
crashes as the underlying functions in the algorithm framework have not
been updated to set the reqsize properly from cra_reqsize. [1]
Add proper set_reqsize calls in the aead init function to properly
initialize reqsize for these algorithms in the framework.
[1]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix MSDU buffer types handling in RX error path
Currently, packets received on the REO exception ring from
unassociated peers are of MSDU buffer type, while the driver expects
link descriptor type packets. These packets are not parsed further due
to a return check on packet type in ath12k_hal_desc_reo_parse_err(),
but the associated skb is not freed. This may lead to kernel
crashes and buffer leaks.
Hence to fix, update the RX error handler to explicitly drop
MSDU buffer type packets received on the REO exception ring.
This prevents further processing of invalid packets and ensures
stability in the RX error handling path.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
