| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Access Control vulnerability could allow a malicious actor with access to the UniFi Play network to enable SSH to make unauthorized changes to the system.
Affected Products:
UniFi Play PowerAmp (Version 1.0.35 and earlier)
UniFi Play Audio Port (Version 1.0.24 and earlier)
Mitigation:
Update UniFi Play PowerAmp to Version 1.0.38 or later
Update UniFi Play Audio Port to Version 1.1.9 or later |
| An Improper Input Validation vulnerability could allow a malicious actor with access to the UniFi Play network to cause the device to stop responding.
Affected Products:
UniFi Play PowerAmp (Version 1.0.35 and earlier)
UniFi Play Audio Port (Version 1.0.24 and earlier)
Mitigation:
Update UniFi Play PowerAmp to Version 1.0.38 or later
Update UniFi Play Audio Port to Version 1.1.9 or later |
| A malicious actor with access to the UniFi Play network could exploit a Path Traversal vulnerability found in the device firmware to write files on the system that could be used for a remote code execution (RCE).
Affected Products:
UniFi Play PowerAmp (Version 1.0.35 and earlier)
UniFi Play Audio Port (Version 1.0.24 and earlier)
Mitigation:
Update UniFi Play PowerAmp to Version 1.0.38 or later
Update UniFi Play Audio Port to Version 1.1.9 or later |
| EspoCRM is an open source customer relationship management application. In versions 9.3.3 and below, the POST /api/v1/Attachment/fromImageUrl endpoint is vulnerable to Server-Side Request Forgery (SSRF) via a DNS rebinding (TOCTOU) condition. Host validation uses dns_get_record() but the actual HTTP request resolves hostnames through curl's internal resolver (gethostbyname()), allowing the two lookups to return different IP addresses for the same hostname. A secondary issue exists where an empty DNS result (due to DNS failure, IPv6-only domains, or non-existent hostnames) causes the validation to implicitly allow the host without further checks. An authenticated attacker with default attachment creation access can exploit this gap to bypass internal IP restrictions and scan internal network ports, confirm the existence of internal hosts, and interact with internal HTTP-based services, though data extraction from binary protocol services and remote code execution are not possible through this endpoint. This issue has been fixed in version 9.3.4. |
| EspoCRM is an open source customer relationship management application. In versions 9.3.3 and below, the POST /api/v1/Email/importEml endpoint contains an Insecure Direct Object Reference (IDOR) vulnerability where the attacker-supplied fileId parameter is used to fetch any attachment directly from the repository without verifying that the current user has authorization to access it. Any authenticated user with Email:create and Import permissions can exploit this to read another user's .eml attachment contents by importing them as a new email into the attacker's mailbox, while the original victim attachment record is deleted as a side effect of the import flow. This is inconsistent with the standard attachment download path, which enforces ACL checks before returning file data, and is practically exploitable because attachment IDs are commonly exposed in normal UI and API workflows such as stream payloads and download links. This issue is fixed in version 9.3.4. |
| jq is a command-line JSON processor. In versions 1.8.1 and below, functions jv_setpath(), jv_getpath(), and delpaths_sorted() in jq's src/jv_aux.c use unbounded recursion whose depth is controlled by the length of a caller-supplied path array, with no depth limit enforced. An attacker can supply a JSON document containing a flat array of ~65,000 integers (~200 KB) that, when used as a path argument by a trusted jq filter, exhausts the C call stack and crashes the process with a segmentation fault (SIGSEGV). This bypass works because the existing MAX_PARSING_DEPTH (10,000) limit only protects the JSON parser, not runtime path operations where arrays can be programmatically constructed to arbitrary lengths. The impact is denial of service (unrecoverable crash) affecting any application or service that processes untrusted JSON input through jq's setpath, getpath, or delpaths builtins. This issue has been addressed in commit fb59f1491058d58bdc3e8dd28f1773d1ac690a1f. |
| jq is a command-line JSON processor. Commits before 6374ae0bcdfe33a18eb0ae6db28493b1f34a0a5b contain a vulnerability where CLI input parsing allows validation bypass via embedded NUL bytes. When reading JSON from files or stdin, jq uses strlen() to determine buffer length instead of the actual byte count from fgets(), causing it to truncate input at the first NUL byte and parse only the preceding prefix. This enables an attacker to craft input with a benign JSON prefix before a NUL byte followed by malicious trailing data, where jq validates only the prefix as valid JSON while silently discarding the suffix. Workflows relying on jq to validate untrusted JSON before forwarding it to downstream consumers are susceptible to parser differential attacks, as those consumers may process the full input including the malicious trailing bytes. This issue has been patched by commit 6374ae0bcdfe33a18eb0ae6db28493b1f34a0a5b. |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. In versions 1.2.2 and below, an unauthenticated p2p peer can cause the RequestMacroChain message handler task to panic. Sending a RequestMacroChain message where the first locator hash on the victim’s main chain is a micro block hash (not a macro block hash) causes said panic. The RequestMacroChain::handle handler selects the locator based only on "is on main chain", then calls get_macro_blocks() and panics via .unwrap() when the selected hash is not a macro block (BlockchainError::BlockIsNotMacro). This issue has been fixed in version 1.3.0. |
| jq is a command-line JSON processor. In commits before 2f09060afab23fe9390cce7cb860b10416e1bf5f, the jv_parse_sized() API in libjq accepts a counted buffer with an explicit length parameter, but its error-handling path formats the input buffer using %s in jv_string_fmt(), which reads until a NUL terminator is found rather than respecting the caller-supplied length. This means that when malformed JSON is passed in a non-NUL-terminated buffer, the error construction logic performs an out-of-bounds read past the end of the buffer. The vulnerability is reachable by any libjq consumer calling jv_parse_sized() with untrusted input, and depending on memory layout, can result in memory disclosure or process termination. The issue has been patched in commit 2f09060afab23fe9390cce7cb860b10416e1bf5f. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.1 and 6.5.4, the SSO mechanism in Zammad was not verifying the header originates from a trusted SSO proxy/gateway before applying further actions on it. This vulnerability is fixed in 7.0.1 and 6.5.4. |
| SourceCodester Storage Unit Rental Management System v1.0 is vulnerable to SQL Injection in the file /storage/admin/maintenance/manage_storage_unit.php. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in OpenText™ Vertica allows Reflected XSS.
The vulnerability could lead to Reflected XSS attack of cross-site scripting in Vertica management console application.This issue affects Vertica: from 10.0 through 10.X, from 11.0 through 11.X, from 12.0 through 12.X, from 23.0 through 23.X, from 24.0 through 24.X, from 25.1.0 through 25.1.X, from 25.2.0 through 25.2.X, from 25.3.0 through 25.3.X. |
| A vulnerability has been identified in Industrial Edge Management Pro V1 (All versions >= V1.7.6 < V1.15.17), Industrial Edge Management Pro V2 (All versions >= V2.0.0 < V2.1.1), Industrial Edge Management Virtual (All versions >= V2.2.0 < V2.8.0). Affected management systems do not properly enforce user authentication on remote connections to devices.
This could facilitate an unauthenticated remote attacker to circumvent authentication and impersonate a legitimate user.
Successful exploitation requires that the attacker has identified the header and port used for remote connections to devices and that the remote connection feature is enabled for the device.
Exploitation allows the attacker to tunnel to the device. Security features on this device itself (e.g. app specific authentication) are not affected. |
| .NET misconfiguration: use of impersonation vulnerability in upKeeper Solutions upKeeper Instant Privilege Access allows Hijacking a Privileged Thread of Execution.This issue affects upKeeper Instant Privilege Access: through 1.5.0. |
| Improper neutralization of argument delimiters in a command ('argument injection') vulnerability in upKeeper Solutions upKeeper Instant Privilege Access allows Hijacking a Privileged Thread of Execution.This issue affects upKeeper Instant Privilege Access: through 1.5.0. |
| In Eclipse Jetty, the HTTP/1.1 parser is vulnerable to request smuggling when chunk extensions are used, similar to the "funky chunks" techniques outlined here:
* https://w4ke.info/2025/06/18/funky-chunks.html
* https://w4ke.info/2025/10/29/funky-chunks-2.html
Jetty terminates chunk extension parsing at \r\n inside quoted strings instead of treating this as an error.
POST / HTTP/1.1
Host: localhost
Transfer-Encoding: chunked
1;ext="val
X
0
GET /smuggled HTTP/1.1
...
Note how the chunk extension does not close the double quotes, and it is able to inject a smuggled request. |
| The OECH1 prefix encoding is intended to obfuscate values across the OpenEdge platform. It has been identified as cryptographically weak and unsuitable for stored encodings and enterprise applications. OECH1 encodings should be considered exploitable and immediately replaced by any other supported prefix encoding, all of which are based on symmetric encryption. |
| A vulnerability in the AdminServer component of OpenEdge on all supported platforms grants its authenticated users OS-level access to the server
through the adopted authority of the AdminServer process itself. The delegated authority of the AdminServer could allow its users the ability to read arbitrary files on the host system through the misuse of the setFile() and openFile()
methods exposed through the RMI interface. Misuse was limited only by OS-level authority of the AdminServer's elevated
privileges granted and the user's access to these methods enabled through RMI. The exploitable methods have been removed thus eliminating their access through RMI or downstream of the RMI registry. |
| An issue in Hostbill v.2025-11-24 and 2025-12-01 allows a remote attacker to execute arbitrary code and escalate privileges via the CSV registration field |
| Kiuwan SAST improperly authorizes SSO logins for locally disabled mapped user accounts, allowing disabled users to continue accessing the application. Kiuwan Cloud was affected, and Kiuwan SAST on-premise (KOP) was affected before 2.8.2509.4. |
