| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix dma_fence refcount leak on error in virtio_gpu_dma_fence_wait()
dma_fence_unwrap_for_each() internally calls dma_fence_unwrap_first()
which does cursor->chain = dma_fence_get(head), taking an extra
reference. On normal loop completion, dma_fence_unwrap_next()
releases this via dma_fence_chain_walk() -> dma_fence_put().
When virtio_gpu_do_fence_wait() fails and the function returns early
from inside the loop, the cursor->chain reference is never released.
This is the only caller in the entire kernel that does an early return
inside dma_fence_unwrap_for_each.
Add dma_fence_put(itr.chain) before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix use-after-free on sbi->sync_decompress
z_erofs_decompress_kickoff() can race with filesystem unmount, causing
a use-after-free on sbi->sync_decompress.
When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff()
to queue z_erofs_decompressqueue_work() asynchronously. Then, after all
folios are unlocked, unmount workflow can proceed and sbi will be freed
before accessing to sbi->sync_decompress.
Thread (unmount) I/O completion kworker
queue_work
z_erofs_decompressqueue_work
(all folios are unlocked)
cleanup_mnt
..
erofs_kill_sb
erofs_sb_free
kfree(sbi)
access sbi->sync_decompress // UAF!! |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: Fix NULL deref in ras_core_get_utc_second_timestamp()
ras_core_get_utc_second_timestamp() retrieves the current UTC timestamp
(in seconds since the Unix epoch) through a platform-specific RAS system
callback and is used for timestamping RAS error events.
The function checks ras_core in the conditional statement before calling
the sys_fn callback. However, when the condition fails, the function
prints an error message using ras_core->dev.
If ras_core is NULL, this can lead to a potential NULL pointer
dereference when accessing ras_core->dev.
Add an early NULL check for ras_core at the beginning of the function
and return 0 when the pointer is not valid. This prevents the
dereference and makes the control flow clearer. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix a potential NPD in cleanup_prefix_route()
addrconf_get_prefix_route() can return the fib6_null_entry sentinel
entry which has a NULL fib6_table pointer. Therefore, before setting the
route's expiration time, check that we are not working with this entry,
as otherwise a NPD will be triggered [1].
Note that the other callers of addrconf_get_prefix_route() are not
susceptible to this bug:
1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF |
RTF_PREFIX_RT' flags which are not set on fib6_null_entry.
2. modify_prefix_route(): Fixed by commit a747e02430df ("ipv6: avoid
possible NULL deref in modify_prefix_route()").
3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for
fib6_null_entry and returns an error.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[...]
Call Trace:
<TASK>
__kasan_check_byte (mm/kasan/common.c:573)
lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1))
_raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1))
cleanup_prefix_route (net/ipv6/addrconf.c:1280)
ipv6_del_addr (net/ipv6/addrconf.c:1342)
inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119)
inet6_rtm_deladdr (net/ipv6/addrconf.c:4812)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6997)
netlink_rcv_skb (net/netlink/af_netlink.c:2555)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1899)
__sock_sendmsg (net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix incorrect inheritable capability in CAPSET records
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ps883x: Fix Oops at unbind
When trying to unbind a device in order to bind to it vfio-platform as:
echo bc0000.geniqup > /sys/bus/platform/devices/bc0000.geniqup/driver/unbind
I get the following Oops:
[ 436.478639] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[ 436.487762] Mem abort info:
[ 436.490716] ESR = 0x0000000096000004
[ 436.494595] EC = 0x25: DABT (current EL), IL = 32 bits
[ 436.500071] SET = 0, FnV = 0
[ 436.503250] EA = 0, S1PTW = 0
[ 436.506505] FSC = 0x04: level 0 translation fault
[ 436.511533] Data abort info:
[ 436.514558] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 436.520215] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 436.525436] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 436.530918] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008861a9000
[ 436.537554] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000
[ 436.544548] Internal error: Oops: 0000000096000004 [#1] SMP
[ 436.550374] Modules linked in:
[ 436.553542] CPU: 2 UID: 0 PID: 671 Comm: bash Tainted: G W 7.0.0-rc3-g56fcdd0911a5-dirty #2 PREEMPT
[ 436.564440] Tainted: [W]=WARN
[ 436.567515] Hardware name: LENOVO 91B6CTO1WW/3796, BIOS O6NKT3BA 05/02/2025
[ 436.574675] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 436.581841] pc : ps883x_retimer_remove+0x14/0x94
[ 436.586605] lr : i2c_device_remove+0x28/0x84
[ 436.591017] sp : ffff8000847137c0
That's because the ps883x_retimer_remove() retrieves the driver data
from i2c_get_clientdata() which was never set at probe. So, add
i2c_set_clientdata() at the end of the probe. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: Fix NULL deref in ras_core_ras_interrupt_detected()
Fixes a NULL pointer dereference when ras_core is NULL and ras_core->dev
is accessed in the error path.
Reported by: Dan Carpenter <dan.carpenter@linaro.org> |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Use pci_name() for debugfs directory naming
Use pci_name(pdev) for the per-device debugfs directory instead of
hardcoded "0" for PFs and pci_slot_name(pdev->slot) for VFs. The
previous approach had two issues:
1. pci_slot_name() dereferences pdev->slot, which can be NULL for VFs
in environments like generic VFIO passthrough or nested KVM,
causing a NULL pointer dereference.
2. Multiple PFs would all use "0", and VFs across different PCI
domains or buses could share the same slot name, leading to
-EEXIST errors from debugfs_create_dir().
pci_name(pdev) returns the unique BDF address, is always valid, and is
unique across the system. |
| In the Linux kernel, the following vulnerability has been resolved:
netlabel: validate unlabeled address and mask attribute lengths
netlbl_unlabel_addrinfo_get() used the address attribute length to
determine whether the attribute data could be read as an IPv4 or IPv6
address, but did not independently validate the corresponding mask
attribute length. A crafted Generic Netlink request could therefore
provide a valid IPv4/IPv6 address attribute with a shorter mask
attribute, which would later be read as a full struct in_addr or
struct in6_addr.
NLA_BINARY policy lengths are maximum lengths by default, so use
NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask
attributes. This rejects short attributes during policy validation and
also exposes the exact length requirements through policy introspection. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix pedit partial COW leading to page cache corruption
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty()
nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks
by comparing it with the current block number bd_blocknr. If they differ,
the block is considered dead and skipped.
However, bd_oblocknr should never be 0 since block 0 typically stores the
primary superblock and is never a valid GC target block. A corrupted ioctl
request with bd_oblocknr set to 0 causes the comparison to incorrectly
match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing
the dead block check and calling nilfs_bmap_mark() on a non-existent
block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering
the WARN_ON(ret == -ENOENT).
Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the
beginning of each iteration.
[ryusuke: slightly modified the commit message and comments for accuracy] |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show()
In f2fs_sbi_show(), the extension_list, extension_count and
hot_ext_count are read without holding sbi->sb_lock. If a concurrent
sysfs store modifies the extension list via f2fs_update_extension_list(),
the show path may read inconsistent count and array contents, potentially
leading to out-of-bounds access or displaying stale data.
Fix this by holding sb_lock around the entire extension list read
and format operation. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Reserve an extra page for early kernel mapping
The final part of [data, end) segment may overflow into the next page of
init_pg_end[1] which is the gap page before early_init_stack[2]:
[1]
crash_arm64_v9.0.1> vtop ffffffed00601000
VIRTUAL PHYSICAL
ffffffed00601000 83401000
PAGE DIRECTORY: ffffffecffd62000
PGD: ffffffecffd62da0 => 10000000833fb003
PMD: ffffff80033fb018 => 10000000833fe003
PTE: ffffff80033fe008 => 68000083401f03
PAGE: 83401000
PTE PHYSICAL FLAGS
68000083401f03 83401000 (VALID|SHARED|AF|NG|PXN|UXN)
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
fffffffec00d0040 83401000 0 0 1 4000 reserved
[2]
ffffffed002c8000 (r) __pi__data
ffffffed0054e000 (d) __pi___bss_start
ffffffed005f5000 (b) __pi_init_pg_dir
ffffffed005fe000 (b) __pi_init_pg_end
ffffffed005ff000 (B) early_init_stack
ffffffed00608000 (b) __pi__end
For 4K pages, the early kernel mapping may use 2MB block entries but the
kernel segments are only 64KB aligned. Segment boundaries that fall
within a 2MB block therefore require a PTE table so that different
attributes can be applied on either side of the boundary.
KERNEL_SEGMENT_COUNT still correctly counts the five permanent kernel
VMAs registered by declare_kernel_vmas(). However, since commit
5973a62efa34 ("arm64: map [_text, _stext) virtual address range
non-executable+read-only"), the early mapper also maps [_text, _stext)
separately from [_stext, _etext). This adds one more early-only split
and can require one more page-table page than the existing
EARLY_SEGMENT_EXTRA_PAGES allowance reserves.
Increase the 4K-page early mapping allowance by one page to cover that
additional split.
[catalin.marinas@arm.com: rewrote part of the commit log]
[catalin.marinas@arm.com: expanded the code comment] |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mailbox-test: free channels on probe error
On probe error, free the previously obtained channels. This not only
prevents a leak, but also UAF scenarios because the client structure
will be removed nonetheless because it was allocated with devm. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Move ndesc initialization at end of airoha_qdma_init_tx()
If queue entry list allocation fails in airoha_qdma_init_tx_queue routine,
airoha_qdma_cleanup_tx_queue() will trigger a NULL pointer dereference
accessing the queue entry array. The issue is due to the early ndesc
initialization in airoha_qdma_init_tx_queue(). Fix the issue moving ndesc
initialization at end of airoha_qdma_init_tx routine. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix NTMP DMA use-after-free issue
The AI-generated review reported a potential DMA use-after-free issue
[1]. If netc_xmit_ntmp_cmd() times out and returns an error, the pending
command is not explicitly aborted, while ntmp_free_data_mem()
unconditionally frees the DMA buffer. If the buffer has already been
reallocated elsewhere, this may lead to silent memory corruption. Because
the hardware eventually processes the pending command and perform a DMA
write of the response to the physical address of the freed buffer.
To resolve this issue, this patch does the following modifications:
1. Convert cbdr->ring_lock from a spinlock to a mutex
The lock was originally a spinlock in case NTMP operations might be
invoked from atomic context. After downstream support for all NTMP
tables, no such usage has materialized. A mutex lock is now required
because the driver now needs to reclaim used BDs and release associated
DMA memory within the lock's context, while dma_free_coherent() might
sleep.
2. Introduce software command BD (struct netc_swcbd)
The hardware write-back overwrites the addr and len fields of the BD,
so the driver cannot rely on the hardware BD to free the associated DMA
memory. The driver now maintains a software shadow BD storing the DMA
buffer pointer, DMA address, and size. And netc_xmit_ntmp_cmd() only
reclaims older BDs when the number of used BDs reaches
NETC_CBDR_CLEAN_WORK (16). The software BD enables correct DMA memory
release. With this, struct ntmp_dma_buf and ntmp_free_data_mem() are no
longer needed and are removed.
3. Require callers to hold ring_lock across netc_xmit_ntmp_cmd()
netc_xmit_ntmp_cmd() releases the ring_lock before the caller finishes
consuming the response. At this point, if a concurrent thread submits
a new command, it may trigger ntmp_clean_cbdr() and free the DMA buffer
while it is still in use. Move ring_lock ownership to the caller to
ensure the response buffer cannot be reclaimed prematurely. So the
helpers ntmp_select_and_lock_cbdr() and ntmp_unlock_cbdr() are added.
These changes eliminate the DMA use-after-free condition and ensure safe
and consistent BD reclamation and DMA buffer lifecycle management. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: hvc_iucv: fix off-by-one in number of supported devices
MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8.
This is the number of entries in:
static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES];
Sometimes hvc_iucv_table[] is limited by:
(a) if (num > hvc_iucv_devices) // for error detection
or
(b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places
(so these 2 don't agree; second one appears to be correct to me.)
hvc_iucv_devices can be 0..8. This is a counter.
(c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES)
If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8].
Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: pinconf-generic: Fully validate 'pinmux' property
The pinconf_generic_parse_dt_pinmux() assumes that the 'pinmux' property
is not empty when present. This might be not true. With that, the allocator
will give a special value in return and not NULL which lead to the crash
when trying to access that (invalid) memory. Fix that by fully validating
'pinmux' value, including its length. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max77705: Free allocated workqueue and fix removal order
Use devm interface for allocating workqueue to fix two bugs at the same
time:
1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.
2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.
The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format. |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: cbb: Fix cross-fabric target timeout lookup
When a fabric receives an error interrupt, the error may have
occurred on a different fabric. The target timeout lookup was using
the wrong base address (cbb->regs) with offsets from a different
fabric's target map, causing a kernel page fault.
Unable to handle kernel paging request at virtual address ffff80000954cc00
pc : tegra234_cbb_get_tmo_slv+0xc/0x28
Call trace:
tegra234_cbb_get_tmo_slv+0xc/0x28
print_err_notifier+0x6c0/0x7d0
tegra234_cbb_isr+0xe4/0x1b4
Add tegra234_cbb_get_fabric() to look up the correct fabric device
using fab_id, and use its base address for accessing target timeout
registers. |
