| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Reinit dev->spinlock between attachments to low-level drivers
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d84f ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can be attached to different low-level drivers over their
lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in
inconsistent lock states being reported when there is a mismatch in the
spin-lock locking levels used by each low-level driver to which the
COMEDI device has been attached. Fix it by reinitializing
`dev->spinlock` before calling the low-level driver's `attach` function
pointer if `CONFIG_LOCKDEP` is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ipv6: ioam6: prevent schema length wraparound in trace fill
ioam6_fill_trace_data() stores the schema contribution to the trace
length in a u8. With bit 22 enabled and the largest schema payload,
sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the
remaining-space check. __ioam6_fill_trace_data() then positions the
write cursor without reserving the schema area but still copies the
4-byte schema header and the full schema payload, overrunning the trace
buffer.
Keep sclen in an unsigned int so the remaining-space check and the write
cursor calculation both see the full schema length. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue
The logic used to abort the DMA ring contains several flaws:
1. The driver unconditionally issues a ring abort even when the ring has
already stopped.
2. The completion used to wait for abort completion is never
re-initialized, resulting in incorrect wait behavior.
3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which
resets hardware ring pointers and disrupts the controller state.
4. If the ring is already stopped, the abort operation should be
considered successful without attempting further action.
Fix the abort handling by checking whether the ring is running before
issuing an abort, re-initializing the completion when needed, ensuring that
RING_CTRL_ENABLE remains asserted during abort, and treating an already
stopped ring as a successful condition. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Eagerly init vgic dist/redist on vgic creation
If vgic_allocate_private_irqs_locked() fails for any odd reason,
we exit kvm_vgic_create() early, leaving dist->rd_regions uninitialised.
kvm_vgic_dist_destroy() then comes along and walks into the weeds
trying to free the RDs. Got to love this stuff.
Solve it by moving all the static initialisation early, and make
sure that if we fail halfway, we're in a reasonable shape to
perform the rest of the teardown. While at it, reset the vgic model
on failure, just in case... |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Remove a user-triggerable WARN on nested_svm_load_cr3() succeeding
Drop the WARN in svm_set_nested_state() on nested_svm_load_cr3() failing
as it is trivially easy to trigger from userspace by modifying CPUID after
loading CR3. E.g. modifying the state restoration selftest like so:
--- tools/testing/selftests/kvm/x86/state_test.c
+++ tools/testing/selftests/kvm/x86/state_test.c
@@ -280,7 +280,16 @@ int main(int argc, char *argv[])
/* Restore state in a new VM. */
vcpu = vm_recreate_with_one_vcpu(vm);
- vcpu_load_state(vcpu, state);
+
+ if (stage == 4) {
+ state->sregs.cr3 = BIT(44);
+ vcpu_load_state(vcpu, state);
+
+ vcpu_set_cpuid_property(vcpu, X86_PROPERTY_MAX_PHY_ADDR, 36);
+ __vcpu_nested_state_set(vcpu, &state->nested);
+ } else {
+ vcpu_load_state(vcpu, state);
+ }
/*
* Restore XSAVE state in a dummy vCPU, first without doing
generates:
WARNING: CPU: 30 PID: 938 at arch/x86/kvm/svm/nested.c:1877 svm_set_nested_state+0x34a/0x360 [kvm_amd]
Modules linked in: kvm_amd kvm irqbypass [last unloaded: kvm]
CPU: 30 UID: 1000 PID: 938 Comm: state_test Tainted: G W 6.18.0-rc7-58e10b63777d-next-vm
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:svm_set_nested_state+0x34a/0x360 [kvm_amd]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl+0xf33/0x1700 [kvm]
kvm_vcpu_ioctl+0x4e6/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x61/0xad0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Simply delete the WARN instead of trying to prevent userspace from shoving
"illegal" state into CR3. For better or worse, KVM's ABI allows userspace
to set CPUID after SREGS, and vice versa, and KVM is very permissive when
it comes to guest CPUID. I.e. attempting to enforce the virtual CPU model
when setting CPUID could break userspace. Given that the WARN doesn't
provide any meaningful protection for KVM or benefit for userspace, simply
drop it even though the odds of breaking userspace are minuscule.
Opportunistically delete a spurious newline. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref()
There is no need to BUG(), we can just return an error and log an error
message. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel
computes pgmap->vmemmap_shift as the number of trailing zeros in the
OR of start_pfn and last_pfn, intending to use the largest compound
page order both endpoints are aligned to.
However, this value is not clamped to MAX_FOLIO_ORDER, so a
sufficiently aligned range (e.g. physical range
[0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000
with 35 trailing zeros) can produce a shift larger than what
memremap_pages() accepts, triggering a WARN and returning -EINVAL:
WARNING: ... memremap_pages+0x512/0x650
requested folio size unsupported
The MAX_FOLIO_ORDER check was added by
commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound
page sizes in memremap_pages()").
Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always
request the largest order the kernel supports, in those cases, rather
than an out-of-range value.
Also fix the error path to propagate the actual error code from
devm_memremap_pages() instead of hard-coding -EFAULT, which was
masking the real -EINVAL return. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
We observe spurious "Synchronous External Abort" exceptions
(ESR=0x96000010) and kernel crashes on Monaco-based platforms.
These faults are caused by the kernel inadvertently accessing
hypervisor-owned memory that is not properly marked as reserved.
>From boot log, The Qualcomm hypervisor reports the memory range
at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned:
qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0
However, the EFI memory map provided by firmware only reserves the
subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion
(0x91a88000–0x91afffff) is incorrectly reported as conventional
memory (from efi debug):
efi: 0x000091a40000-0x000091a87fff [Reserved...]
efi: 0x000091a88000-0x0000938fffff [Conventional...]
As a result, the allocator may hand out PFNs inside the hypervisor
owned region, causing fatal aborts when the kernel accesses those
addresses.
Add a reserved-memory carveout for the Gunyah hypervisor metadata
at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not
map or allocate from this area.
For the record:
Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC)
UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix event ring index not programmed for IPA v5.0+
For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to
CH_C_CNTXT_1. The v5.0 register definition intended to define this
field in the CH_C_CNTXT_1 fmask array but used the old identifier of
ERINDEX instead of CH_ERINDEX.
Without a valid event ring, GSI channels could never signal transfer
completions. This caused gsi_channel_trans_quiesce() to block
forever in wait_for_completion().
At least for IPA v5.2 this resolves an issue seen where runtime
suspend, system suspend, and remoteproc stop all hanged forever. It
also meant the IPA data path was completely non functional. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid uninit-value access in f2fs_sanity_check_node_footer
syzbot reported a f2fs bug as below:
BUG: KMSAN: uninit-value in f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520
f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520
f2fs_finish_read_bio+0xe1e/0x1d60 fs/f2fs/data.c:177
f2fs_read_end_io+0x6ab/0x2220 fs/f2fs/data.c:-1
bio_endio+0x1006/0x1160 block/bio.c:1792
submit_bio_noacct+0x533/0x2960 block/blk-core.c:891
submit_bio+0x57a/0x620 block/blk-core.c:926
blk_crypto_submit_bio include/linux/blk-crypto.h:203 [inline]
f2fs_submit_read_bio+0x12c/0x360 fs/f2fs/data.c:557
f2fs_submit_page_bio+0xee2/0x1450 fs/f2fs/data.c:775
read_node_folio+0x384/0x4b0 fs/f2fs/node.c:1481
__get_node_folio+0x5db/0x15d0 fs/f2fs/node.c:1576
f2fs_get_inode_folio+0x40/0x50 fs/f2fs/node.c:1623
do_read_inode fs/f2fs/inode.c:425 [inline]
f2fs_iget+0x1209/0x9380 fs/f2fs/inode.c:596
f2fs_fill_super+0x8f5a/0xb2e0 fs/f2fs/super.c:5184
get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694
get_tree_bdev+0x38/0x50 fs/super.c:1717
f2fs_get_tree+0x35/0x40 fs/f2fs/super.c:5436
vfs_get_tree+0xb3/0x5d0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline]
do_new_mount_fc fs/namespace.c:3763 [inline]
do_new_mount+0x885/0x1dd0 fs/namespace.c:3839
path_mount+0x7a2/0x20b0 fs/namespace.c:4159
do_mount fs/namespace.c:4172 [inline]
__do_sys_mount fs/namespace.c:4361 [inline]
__se_sys_mount+0x704/0x7f0 fs/namespace.c:4338
__x64_sys_mount+0xe4/0x150 fs/namespace.c:4338
x64_sys_call+0x39f0/0x3ea0 arch/x86/include/generated/asm/syscalls_64.h:166
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x134/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is: in f2fs_finish_read_bio(), we may access uninit data
in folio if we failed to read the data from device into folio, let's add
a check condition to avoid such issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Account property blob allocations to memcg
DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized
property blobs backed by kernel memory.
Currently, the blob data allocation is not accounted to the allocating
process's memory cgroup, allowing unprivileged users to trigger unbounded
kernel memory consumption and potentially cause system-wide OOM.
Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory
is properly charged to the caller's memcg. This ensures existing cgroup
memory limits apply and prevents uncontrolled kernel memory growth without
introducing additional policy or per-file limits. |
| In the Linux kernel, the following vulnerability has been resolved:
kexec: derive purgatory entry from symbol
kexec_load_purgatory() derives image->start by locating e_entry inside an
SHF_EXECINSTR section. If the purgatory object contains multiple
executable sections with overlapping sh_addr, the entrypoint check can
match more than once and trigger a WARN.
Derive the entry section from the purgatory_start symbol when present and
compute image->start from its final placement. Keep the existing e_entry
fallback for purgatories that do not expose the symbol.
WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784
Call Trace:
<TASK>
bzImage64_load+0x133/0xa00
__do_sys_kexec_file_load+0x2b3/0x5c0
do_syscall_64+0x81/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[me@linux.beauty: move helper to avoid forward declaration, per Baoquan] |
| In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: hx9023s: Protect against division by zero in set_samp_freq
Avoid division by zero when sampling frequency is unspecified. |
| In the Linux kernel, the following vulnerability has been resolved:
most: core: fix leak on early registration failure
A recent commit fixed a resource leak on early registration failures but
for some reason left out the first error path which still leaks the
resources associated with the interface.
Fix up also the first error path so that the interface is always
released on errors. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix sync handling in amdgpu_dma_buf_move_notify
Invalidating a dmabuf will impact other users of the shared BO.
In the scenario where process A moves the BO, it needs to inform
process B about the move and process B will need to update its
page table.
The commit fixes a synchronisation bug caused by the use of the
ticket: it made amdgpu_vm_handle_moved behave as if updating
the page table immediately was correct but in this case it's not.
An example is the following scenario, with 2 GPUs and glxgears
running on GPU0 and Xorg running on GPU1, on a system where P2P
PCI isn't supported:
glxgears:
export linear buffer from GPU0 and import using GPU1
submit frame rendering to GPU0
submit tiled->linear blit
Xorg:
copy of linear buffer
The sequence of jobs would be:
drm_sched_job_run # GPU0, frame rendering
drm_sched_job_queue # GPU0, blit
drm_sched_job_done # GPU0, frame rendering
drm_sched_job_run # GPU0, blit
move linear buffer for GPU1 access #
amdgpu_dma_buf_move_notify -> update pt # GPU0
It this point the blit job on GPU0 is still running and would
likely produce a page fault. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spidev: fix lock inversion between spi_lock and buf_lock
The spidev driver previously used two mutexes, spi_lock and buf_lock,
but acquired them in different orders depending on the code path:
write()/read(): buf_lock -> spi_lock
ioctl(): spi_lock -> buf_lock
This AB-BA locking pattern triggers lockdep warnings and can
cause real deadlocks:
WARNING: possible circular locking dependency detected
spidev_ioctl() -> mutex_lock(&spidev->buf_lock)
spidev_sync_write() -> mutex_lock(&spidev->spi_lock)
*** DEADLOCK ***
The issue is reproducible with a simple userspace program that
performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from
separate threads on the same spidev file descriptor.
Fix this by simplifying the locking model and removing the lock
inversion entirely. spidev_sync() no longer performs any locking,
and all callers serialize access using spi_lock.
buf_lock is removed since its functionality is fully covered by
spi_lock, eliminating the possibility of lock ordering issues.
This removes the lock inversion and prevents deadlocks without
changing userspace ABI or behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dsc eDP issue
[why]
Need to add function hook check before use |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Properly mark live registers for indirect jumps
For a `gotox rX` instruction the rX register should be marked as used
in the compute_insn_live_regs() function. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix UAF in le_read_features_complete
This fixes the following backtrace caused by hci_conn being freed
before le_read_features_complete but after
hci_le_read_remote_features_sync so hci_conn_del -> hci_cmd_sync_dequeue
is not able to prevent it:
==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
BUG: KASAN: slab-use-after-free in atomic_dec_and_test include/linux/atomic/atomic-instrumented.h:1383 [inline]
BUG: KASAN: slab-use-after-free in hci_conn_drop include/net/bluetooth/hci_core.h:1688 [inline]
BUG: KASAN: slab-use-after-free in le_read_features_complete+0x5b/0x340 net/bluetooth/hci_sync.c:7344
Write of size 4 at addr ffff8880796b0010 by task kworker/u9:0/52
CPU: 0 UID: 0 PID: 52 Comm: kworker/u9:0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:194 [inline]
kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:200
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_dec_and_test include/linux/atomic/atomic-instrumented.h:1383 [inline]
hci_conn_drop include/net/bluetooth/hci_core.h:1688 [inline]
le_read_features_complete+0x5b/0x340 net/bluetooth/hci_sync.c:7344
hci_cmd_sync_work+0x1ff/0x430 net/bluetooth/hci_sync.c:334
process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3421
kthread+0x3c5/0x780 kernel/kthread.c:463
ret_from_fork+0x983/0xb10 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
Allocated by task 5932:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:56
kasan_save_track+0x14/0x30 mm/kasan/common.c:77
poison_kmalloc_redzone mm/kasan/common.c:400 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:417
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
__hci_conn_add+0xf8/0x1c70 net/bluetooth/hci_conn.c:963
hci_conn_add_unset+0x76/0x100 net/bluetooth/hci_conn.c:1084
le_conn_complete_evt+0x639/0x1f20 net/bluetooth/hci_event.c:5714
hci_le_enh_conn_complete_evt+0x23d/0x380 net/bluetooth/hci_event.c:5861
hci_le_meta_evt+0x357/0x5e0 net/bluetooth/hci_event.c:7408
hci_event_func net/bluetooth/hci_event.c:7716 [inline]
hci_event_packet+0x685/0x11c0 net/bluetooth/hci_event.c:7773
hci_rx_work+0x2c9/0xeb0 net/bluetooth/hci_core.c:4076
process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3421
kthread+0x3c5/0x780 kernel/kthread.c:463
ret_from_fork+0x983/0xb10 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
Freed by task 5932:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:56
kasan_save_track+0x14/0x30 mm/kasan/common.c:77
__kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:587
kasan_save_free_info mm/kasan/kasan.h:406 [inline]
poison_slab_object mm/kasan/common.c:252 [inline]
__kasan_slab_free+0x5f/0x80 mm/kasan/common.c:284
kasan_slab_free include/linux/kasan.h:234 [inline]
slab_free_hook mm/slub.c:2540 [inline]
slab_free mm/slub.c:6663 [inline]
kfree+0x2f8/0x6e0 mm/slub.c:6871
device_release+0xa4/0x240 drivers/base/core.c:2565
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1e7/0x590 lib/kobject.
---truncated--- |
