| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: Make the addrs_lock be per port
Make the addrs_lock be per port, not per ipvlan dev.
Initial code seems to be written in the assumption,
that any address change must occur under RTNL.
But it is not so for the case of IPv6. So
1) Introduce per-port addrs_lock.
2) It was needed to fix places where it was forgotten
to take lock (ipvlan_open/ipvlan_close)
This appears to be a very minor problem though.
Since it's highly unlikely that ipvlan_add_addr() will
be called on 2 CPU simultaneously. But nevertheless,
this could cause:
1) False-negative of ipvlan_addr_busy(): one interface
iterated through all port->ipvlans + ipvlan->addrs
under some ipvlan spinlock, and another added IP
under its own lock. Though this is only possible
for IPv6, since looks like only ipvlan_addr6_event() can be
called without rtnl_lock.
2) Race since ipvlan_ht_addr_add(port) is called under
different ipvlan->addrs_lock locks
This should not affect performance, since add/remove IP
is a rare situation and spinlock is not taken on fast
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
netrom: fix double-free in nr_route_frame()
In nr_route_frame(), old_skb is immediately freed without checking if
nr_neigh->ax25 pointer is NULL. Therefore, if nr_neigh->ax25 is NULL,
the caller function will free old_skb again, causing a double-free bug.
Therefore, to prevent this, we need to modify it to check whether
nr_neigh->ax25 is NULL before freeing old_skb. |
| In the Linux kernel, the following vulnerability has been resolved:
gue: Fix skb memleak with inner IP protocol 0.
syzbot reported skb memleak below. [0]
The repro generated a GUE packet with its inner protocol 0.
gue_udp_recv() returns -guehdr->proto_ctype for "resubmit"
in ip_protocol_deliver_rcu(), but this only works with
non-zero protocol number.
Let's drop such packets.
Note that 0 is a valid number (IPv6 Hop-by-Hop Option).
I think it is not practical to encap HOPOPT in GUE, so once
someone starts to complain, we could pass down a resubmit
flag pointer to distinguish two zeros from the upper layer:
* no error
* resubmit HOPOPT
[0]
BUG: memory leak
unreferenced object 0xffff888109695a00 (size 240):
comm "syz.0.17", pid 6088, jiffies 4294943096
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@..............
backtrace (crc a84b336f):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270
__build_skb+0x23/0x60 net/core/skbuff.c:474
build_skb+0x20/0x190 net/core/skbuff.c:490
__tun_build_skb drivers/net/tun.c:1541 [inline]
tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636
tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770
tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x45d/0x710 fs/read_write.c:686
ksys_write+0xa7/0x170 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge
Patch series "mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted
merge", v2.
Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA
merges") introduced the ability to merge previously unavailable VMA merge
scenarios.
However, it is handling merges incorrectly when it comes to mremap() of a
faulted VMA adjacent to an unfaulted VMA. The issues arise in three
cases:
1. Previous VMA unfaulted:
copied -----|
v
|-----------|.............|
| unfaulted |(faulted VMA)|
|-----------|.............|
prev
2. Next VMA unfaulted:
copied -----|
v
|.............|-----------|
|(faulted VMA)| unfaulted |
|.............|-----------|
next
3. Both adjacent VMAs unfaulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| unfaulted |
|-----------|.............|-----------|
prev next
This series fixes each of these cases, and introduces self tests to assert
that the issues are corrected.
I also test a further case which was already handled, to assert that my
changes continues to correctly handle it:
4. prev unfaulted, next faulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| faulted |
|-----------|.............|-----------|
prev next
This bug was discovered via a syzbot report, linked to in the first patch
in the series, I confirmed that this series fixes the bug.
I also discovered that we are failing to check that the faulted VMA was
not forked when merging a copied VMA in cases 1-3 above, an issue this
series also addresses.
I also added self tests to assert that this is resolved (and confirmed
that the tests failed prior to this).
I also cleaned up vma_expand() as part of this work, renamed
vma_had_uncowed_parents() to vma_is_fork_child() as the previous name was
unduly confusing, and simplified the comments around this function.
This patch (of 4):
Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA
merges") introduced the ability to merge previously unavailable VMA merge
scenarios.
The key piece of logic introduced was the ability to merge a faulted VMA
immediately next to an unfaulted VMA, which relies upon dup_anon_vma() to
correctly handle anon_vma state.
In the case of the merge of an existing VMA (that is changing properties
of a VMA and then merging if those properties are shared by adjacent
VMAs), dup_anon_vma() is invoked correctly.
However in the case of the merge of a new VMA, a corner case peculiar to
mremap() was missed.
The issue is that vma_expand() only performs dup_anon_vma() if the target
(the VMA that will ultimately become the merged VMA): is not the next VMA,
i.e. the one that appears after the range in which the new VMA is to be
established.
A key insight here is that in all other cases other than mremap(), a new
VMA merge either expands an existing VMA, meaning that the target VMA will
be that VMA, or would have anon_vma be NULL.
Specifically:
* __mmap_region() - no anon_vma in place, initial mapping.
* do_brk_flags() - expanding an existing VMA.
* vma_merge_extend() - expanding an existing VMA.
* relocate_vma_down() - no anon_vma in place, initial mapping.
In addition, we are in the unique situation of needing to duplicate
anon_vma state from a VMA that is neither the previous or next VMA being
merged with.
dup_anon_vma() deals exclusively with the target=unfaulted, src=faulted
case. This leaves four possibilities, in each case where the copied VMA
is faulted:
1. Previous VMA unfaulted:
copied -----|
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Enforce that teql can only be used as root qdisc
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix recvmsg() unconditional requeue
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also. |
| In the Linux kernel, the following vulnerability has been resolved:
net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to
ioq_vector. If request_irq() fails part-way, the rollback loop calls
free_irq() with dev_id set to 'oct', which does not match the original
dev_id and may leave the irqaction registered.
This can keep IRQ handlers alive while ioq_vector is later freed during
unwind/teardown, leading to a use-after-free or crash when an interrupt
fires.
Fix the error path to free IRQs with the same ioq_vector dev_id used
during request_irq(). |
| A security flaw has been discovered in Casdoor 2.356.0. This affects the function dangerouslySetInnerHTML. Performing a manipulation of the argument formCss/formCssMobile/formSideHtml results in cross site scripting. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| ** UNSUPPORTED WHEN ASSIGNED ** Focalboard version 8.0 fails to validate file ownership when serving uploaded files. This allows an authenticated attacker who knows a victim's fileID to read the content of the file. NOTE: Focalboard as a standalone product is not maintained and no fix will be issued. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/logicvc: Fix device node reference leak in logicvc_drm_config_parse()
The logicvc_drm_config_parse() function calls of_get_child_by_name() to
find the "layers" node but fails to release the reference, leading to a
device node reference leak.
Fix this by using the __free(device_node) cleanup attribute to automatic
release the reference when the variable goes out of scope. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
In protected mode, the hypervisor maintains a separate instance of
the `kvm` structure for each VM. For non-protected VMs, this structure is
initialized from the host's `kvm` state.
Currently, `pkvm_init_features_from_host()` copies the
`KVM_ARCH_FLAG_ID_REGS_INITIALIZED` flag from the host without the
underlying `id_regs` data being initialized. This results in the
hypervisor seeing the flag as set while the ID registers remain zeroed.
Consequently, `kvm_has_feat()` checks at EL2 fail (return 0) for
non-protected VMs. This breaks logic that relies on feature detection,
such as `ctxt_has_tcrx()` for TCR2_EL1 support. As a result, certain
system registers (e.g., TCR2_EL1, PIR_EL1, POR_EL1) are not
saved/restored during the world switch, which could lead to state
corruption.
Fix this by explicitly copying the ID registers from the host `kvm` to
the hypervisor `kvm` for non-protected VMs during initialization, since
we trust the host with its non-protected guests' features. Also ensure
`KVM_ARCH_FLAG_ID_REGS_INITIALIZED` is cleared initially in
`pkvm_init_features_from_host` so that `vm_copy_id_regs` can properly
initialize them and set the flag once done. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Validate command buffer payload count
The count field in the command header is used to determine the valid
payload size. Verify that the valid payload does not exceed the remaining
buffer space. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: free pages on error in btrfs_uring_read_extent()
In this function the 'pages' object is never freed in the hopes that it is
picked up by btrfs_uring_read_finished() whenever that executes in the
future. But that's just the happy path. Along the way previous
allocations might have gone wrong, or we might not get -EIOCBQUEUED from
btrfs_encoded_read_regular_fill_pages(). In all these cases, we go to a
cleanup section that frees all memory allocated by this function without
assuming any deferred execution, and this also needs to happen for the
'pages' allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handler
Commit 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ
handler") introduces a range check for if_id to avoid an out-of-bounds
access. If an out-of-bounds if_id is detected, the interrupt status is
not cleared. This may result in an interrupt storm.
Clear the interrupt status after detecting an out-of-bounds if_id to avoid
the problem.
Found by an experimental AI code review agent at Google. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/configfs: Free ctx_restore_mid_bb in release
ctx_restore_mid_bb memory is allocated in wa_bb_store(), but
xe_config_device_release() only frees ctx_restore_post_bb.
Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation
when the configfs device is removed.
(cherry picked from commit a235e7d0098337c3f2d1e8f3610c719a589e115f) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: Fix a locking bug
Make sure that wl->mutex is locked before it is unlocked. This has been
detected by the Clang thread-safety analyzer. |
| ** UNSUPPORTED WHEN ASSIGNED ** Focalboard version 8.0 fails to sanitize category IDs before incorporating them into dynamic SQL statements when reordering categories. An attacker can inject a malicious SQL payload into the category id field, which is stored in the database and later executed unsanitized when the category reorder API processes the stored value. This Second-Order SQL Injection (Time-Based Blind) allows an authenticated attacker to exfiltrate sensitive data including password hashes of other users. NOTE: Focalboard as a standalone product is not maintained and no fix will be issued. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Fix circular locking dependency in rds_tcp_tune
syzbot reported a circular locking dependency in rds_tcp_tune() where
sk_net_refcnt_upgrade() is called while holding the socket lock:
======================================================
WARNING: possible circular locking dependency detected
======================================================
kworker/u10:8/15040 is trying to acquire lock:
ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0},
at: __kmalloc_cache_noprof+0x4b/0x6f0
but task is already holding lock:
ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0},
at: rds_tcp_tune+0xd7/0x930
The issue occurs because sk_net_refcnt_upgrade() performs memory
allocation (via get_net_track() -> ref_tracker_alloc()) while the
socket lock is held, creating a circular dependency with fs_reclaim.
Fix this by moving sk_net_refcnt_upgrade() outside the socket lock
critical section. This is safe because the fields modified by the
sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not
accessed by any concurrent code path at this point.
v2:
- Corrected fixes tag
- check patch line wrap nits
- ai commentary nits |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/reg_sr: Fix leak on xa_store failure
Free the newly allocated entry when xa_store() fails to avoid a memory
leak on the error path.
v2: use goto fail_free. (Bala)
(cherry picked from commit 6bc6fec71ac45f52db609af4e62bdb96b9f5fadb) |
