| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate the whole DACL before rewriting it in cifsacl
build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a
server-supplied dacloffset and then use the incoming ACL to rebuild the
chmod/chown security descriptor.
The original fix only checked that the struct smb_acl header fits before
reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate
header-field OOB read, but the rewrite helpers still walk ACEs based on
pdacl->num_aces with no structural validation of the incoming DACL body.
A malicious server can return a truncated DACL that still contains a
header, claims one or more ACEs, and then drive
replace_sids_and_copy_aces() or set_chmod_dacl() past the validated
extent while they compare or copy attacker-controlled ACEs.
Factor the DACL structural checks into validate_dacl(), extend them to
validate each ACE against the DACL bounds, and use the shared validator
before the chmod/chown rebuild paths. parse_dacl() reuses the same
validator so the read-side parser and write-side rewrite paths agree on
what constitutes a well-formed incoming DACL. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.5 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an unauthenticated user to cause denial of service by sending specially crafted payloads on certain API endpoints. |
| ** UNSUPPORTED WHEN ASSIGNED ** A buffer overflow vulnerability in the formWep(), formWlAc(), formPasswordSetup(), formUpgradeCert(), and formDelcert() functions of the “webs” binary in Zyxel NWA1100-N customized firmware version 1.00(AACE.1)C0 could allow an attacker to trigger a denial-of-service (DoS) condition by sending a crafted HTTP request to a vulnerable device. |
| barebox prior to version 2026.04.0 contains an out-of-bounds read vulnerability in DHCP option parsing within the dhcp_message_type() function that fails to verify the options pointer remains within received packet bounds. An attacker on the same broadcast domain can send a crafted DHCP Offer or ACK packet without a proper 0xff end marker to cause the parser to read past valid packet data and potentially crash the system. |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. From to 1.8.7-r1, signed integer overflow in sixel_encode_highcolor's allocation size calculation can lead to a heap buffer overflow. The public sixel_encode entry point validates only that width and height are greater than zero, with no upper bound. width and height are multiplied as plain int when computing the allocation size for paletted_pixels and normalized_pixels. Any caller that asks libsixel to encode a pixel buffer with width times height greater than INT_MAX (about 2.15 billion) will hit a wrapped allocation size; under the right wrap, the malloc succeeds with a buffer much smaller than the encoder expects, and the encoder writes past the end of the heap allocation. This vulnerability is fixed in 1.8.7-r2. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, the bounds check in TGAInput::decode_pixel computes k + palbytespp as unsigned 32-bit arithmetic. When k = 0xFFFFFFFC and palbytespp = 4, the addition wraps to 0, which compares less than palette_alloc_size and passes the check. The subsequent palette access uses the unwrapped k (0xFFFFFFFC) as the index, reading ~4 GB past the start of the palette buffer — SEGV. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. |
| Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.2, Vvveb CMS does not validate the sign of the quantity parameter on the cart-add endpoint. Submitting a negative integer is accepted by the server and treated as a normal positive line-item, but with the sign carried through into every downstream computation: line total, sub-total, taxes, and grand total all become negative numbers. The customer-facing cart UI then displays a negative grand total to the user, the checkout flow accepts the negative cart, and the resulting order is persisted in the merchant's database with a negative total column. From the merchant's order management dashboard, this surfaces as a real order with a negative total — an "the merchant owes the customer money" record that no legitimate workflow ever creates. This vulnerability is fixed in 1.0.8.2. |
| Missing bounds validation in the MQTT v5.0 property parser in coreMQTT before 5.0.1 allows an MQTT broker to cause a denial of service by sending a crafted packet.
To remediate this issue, users should upgrade to v5.0.1. |
| Buffer overflow for some Intel(R) QAT software drivers for Windows before version 1.13 within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.3 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an authenticated user with developer-role permissions to bypass package protection rules due to improper access control. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel
computes pgmap->vmemmap_shift as the number of trailing zeros in the
OR of start_pfn and last_pfn, intending to use the largest compound
page order both endpoints are aligned to.
However, this value is not clamped to MAX_FOLIO_ORDER, so a
sufficiently aligned range (e.g. physical range
[0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000
with 35 trailing zeros) can produce a shift larger than what
memremap_pages() accepts, triggering a WARN and returning -EINVAL:
WARNING: ... memremap_pages+0x512/0x650
requested folio size unsupported
The MAX_FOLIO_ORDER check was added by
commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound
page sizes in memremap_pages()").
Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always
request the largest order the kernel supports, in those cases, rather
than an out-of-range value.
Also fix the error path to propagate the actual error code from
devm_memremap_pages() instead of hard-coding -EFAULT, which was
masking the real -EINVAL return. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix event ring index not programmed for IPA v5.0+
For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to
CH_C_CNTXT_1. The v5.0 register definition intended to define this
field in the CH_C_CNTXT_1 fmask array but used the old identifier of
ERINDEX instead of CH_ERINDEX.
Without a valid event ring, GSI channels could never signal transfer
completions. This caused gsi_channel_trans_quiesce() to block
forever in wait_for_completion().
At least for IPA v5.2 this resolves an issue seen where runtime
suspend, system suspend, and remoteproc stop all hanged forever. It
also meant the IPA data path was completely non functional. |
| Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. From 0.4.0 to before 0.15.0, CertVerifier.Verify() in pkg/git/verifier.go unconditionally dereferences certs[0] after sd.GetCertificates() without checking the slice length. A CMS/PKCS7 signed message with an empty certificate set is a structurally valid DER payload; GetCertificates() returns an empty slice with no error, causing an immediate index-out-of-range panic. On the gitsign --verify code path (the GPG-compatible mode invoked by git verify-commit), the panic is silently recovered by internal/io/streams.go's Wrap() function, which returns nil instead of an error. main.go then exits with code 0, causing exit-code-only verification callers to interpret the failed verification as success. This vulnerability is fixed in 0.15.0. |
| Insufficient parameter sanitization in TEE SOC Driver could allow an attacker to issue a malformed DRV_SOC_CMD_ID_SRIOV_CHECK_TA_COMPAT to cause incorrect shared memory mapping, potentially resulting in unexpected behavior. |
| Insufficient policy enforcement in Payments in Google Chrome on Android prior to 148.0.7778.168 allowed a remote attacker to bypass discretionary access control via a crafted HTML page. (Chromium security severity: Medium) |
| Stack-based buffer overflow in Windows Netlogon allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Windows DNS allows an unauthorized attacker to execute code over a network. |
| AGL agl-service-can-low-level thru 17.1.12 contains a heap buffer over-read in the isotp-c library. In isotp_continue_receive (receive.c:87-89), the payload_length for a Single Frame is extracted from a 4-bit nibble in the CAN frame data, yielding values 0-15. However, a standard CAN frame is only 8 bytes, with payload starting at data[1] (7 bytes available). When payload_length exceeds the available data (e.g., nibble=15 but only 7 payload bytes exist), memcpy(message.payload, &data[1], payload_length) reads up to 8 bytes past the end of the data buffer. |
